Design, Construction and Renovation of Civil, Structural, Internal Electrification, landscaping work at Tirtol, Dist. Jagatsinghpur

Amount

Renovation

Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead But for Wall quantity

Do as per sl no. 3 but for Ceiling

Dismantling and removing lime concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials for reuse and removing the debris within 50m lead

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead

Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum.

Providing and laying plain cement concrete 1:4:8 (1 part cement: 4 parts coarse sand: 8 parts of graded stone aggregate 40mm max. size) in foundation, footing for columns, floor (sub base), including from work, mixing, placing, compacting, curing etc. all complete as per specification and directed by the Engineer.

Providing and laying 25mm damp coarse with cc (1:2:4) using 12mm size hard granite chips in walls, including from work, mixing, placing, compacting, curing etc. all complete as per specification and directed by the Engineer.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. But for upto Plinth level

Do as per Sl. No. 12 but for above plinth level.Column & Beam (Ground Floor)

Do as per Sl no. 12 but for Roof Slab (Ground Floor)

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying. But for upto Plinth Level

Do as per Sl no. 15 but for above plinth level

Supplying and placing in position High yield deformed bars reinforcement (conforming to IS: 1139)/Cold Twisted deformed bars reinforcement (conforming to IS: 1786), for RCC work including the cost of steel straightening, cleaning, decoling, cutting, bending to requiredshapes and lengths as per details, binding with contractor's own 16 SWG black soft annealed binding wire at every intersection. but for upto plinth level.

Do as per Sl. No. 19 but for above plinth level.

Providing and laying flyash 1st class brick masonry work in cement mortar 1:6 (1 cement:6 coarse sand) as per specifications in one or more brick thickness and in any shape including providing recesses, opening, scaffolding, staging, curing, finishing the joints flush below ground level and raking out joints in and above plinth level in super structure

Providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment concrete surface, including provision of groove wherver necessary curing and cost of scaffolding, leveling in prefect vertical plane complete. (Ceiling ).

Providing 12mm thick cement plaster in mortar 1:6 (1 cement: 6 coarse sand) on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer (Inside). but for Ground floor

Providing 16mm thick cement plaster in mortar 1:6 (1 cement: 6 coarse sand) on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer (Inside). but for ground floor

Do as per item no.22 but for Terrace Floor

Providing cement punning on newly plstered surface wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer (outside).

White cement washing one coat with any approved white cement on New Plastered out side surfaces of shade including cost of all materials, labour, T&P required for the work complete.as per mention specification but for ground floor

Do as per item no.25 but for Terrace Floor

Wall painting two coats with any approved quality made by Dulux/Asian of Weather shield coat over a coat of priming on new work to give an even shade including cost colour, paint etc. of all materials, labour, T&P required for the work complete.as per mention specification but for ground floor

Do as per item no.27 but for Terrace Floor

Finishing Wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete.

Providing & applying two coats of Plastic emulsion paint of approved made by Dulux/Asian/Nerolac/Berger shade inside surfaces to give a smooth and even shade including one coats of primer, cleaning and preparation of surfaces, necessary scaffolding etc. complete for all heights.

Providing and laying in position 100 mm thk Cement concrete ( CC ) vaccume dewatered floor (VDF) weigh batched machine mixed concrete of M 25 grade (Minimum Cement content ‐ 360 kg/cum) with smooth finish surface on upper level RCC floor slab as per design mix.Before laying of concrete clean up the RCC slab surface ,remove loose mortar,curing compound etc complete.Add chemically surface modified straight fibers in concrete at minimum of 900 gm/cum of concrete of Dolphin floats /Reliance recrons or Equivalent . The suitable size of panel should be approximately 4.0 x 5.0 m or as directed by Engineer by grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be made of 4mm width and 25 mm depth min (1/3 rd depth of the slab thickness ) as shown in the drawing and shall be filled with single component,polyurethene based,elastrometric joint sealenet of BASF or Equivalent. The sawing operation should be carried out as soon as concrete is ready to accept the saw cut without toweling etc as directed by Architect and Engineer‐in‐charge. The rate shall be inclusive of labour, grooves, sealant and machinery cost.

Providing & Applying 3 mm thick Epoxy self levelling flooring over 100 mm thk VDF(As per section 9.18) of M/s Apurva India Ltd / FOSROC or Equivalent along with 300 Micron PU TOPCOAT MATT FINISH on primer coat of solvent free epoxy based primer including surface preparation includding grinding of concrete surface,proper cleaning,removing of loose mortar alll in complete as per manufactures instruction and using their approved applicator. Fill up the joints and cracks if any with semi rigid epoxy mortar or as directed by engineer complete.

Supplying, fitting and fixing of M.S. Iron grill/gate made out of structure steel angle, sheet flat/sequare bar etc. for grills of approved design including all cost conveyance taxes etc. complete.

Providing & laying two coats of synthetic enamel paint on new (steel) surface over one coat with any approved primer including cost of primer of approved shade after necessary preparation of surface by spra painting in all floors of conveyance of all complete including supply of all labour, materials, T&P, taxes etc. complete.

Providing, laying & Fixing first quality Regency/Spartex/Kajaria/Somani vitrified tile of size (600x600) mm in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile, design as directed by EIC. as per mention specification but for ground floor

Providing & laying first quality Regency/Spartex/Kajaria/Somani glazed tiles in walls on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile, design as directed by EIC.

Providing, laying & fixing first quality Regency/Spartex/Kajaria/Somani anti skid tiles in steps & rises on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile, design as directed by EIC.

Supplying, fitting and fixing of openable uPVC Doors with Door Frame of approved make with 6mm thick toughned glass of approved quality complete with frames, shutter, all fittings and fixtures as per the instructions of Engineer-in-Charge.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds 9.147.A1 Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A1.1 Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).

Supplying, Fitting and fxing of stainless steel of 304 grade in hand railing in all floors using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. Ground floor

Do as per sl no.40, specification but for first floor

Providing and injecting chemical emulsiion for PRE_CONSTRUCTIONAL anti-termile treatment and creating achemical barrier with a interval of 2'-0"/2'-0" square on points under and under and around the column pits, well treanches basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. complete (plinth area of the building at ground fllor only shall be measured) as per drawing, design and direction etc. complete.

2.5 cm thick (Avrage)grading concrete (1:2:2) on roof slab with 6 mm size hard broken granite chips on new works

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge.(A/R CPWD 2019 CL 16.19 & 16.19.2 PAGE 1251)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

Providing and fixing ball bearing for rolling shutters

Internal Electrification

Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated multisrand copper conductor, switch, ceiling rose - ISI marked PVC Flexible conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. as per mention specification but for Group A

Do as per sl no. 48 but for Group B

Do as per sl no. 48 but for Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy duty flexible PVC conduit 1.6mm thick, but for 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping

Do as per sl no. 51 but for 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points

Do as per sl no. 51 but for 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC & gyser Point.

Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.(Terminet at G.floor EPABX room) , 2 Pair

Supplying and fixing of following sizes of PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. 20 sqmm

Switch & Sockets

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, Painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection , painting etc. as required.

Supplying and fixing of Telephone socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required.

Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Installation, Testing and Commissioning of Electronic type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.

SDB'S, MCB, ISOLATOR,CABLE,PANELS-:

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate ,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). as per mention specification but for 12 way (12 + 36), Double door ( For Floor)

Do as per sl no. 63 specification but for 4 WAY (4 + 12) SINGLE DOOR, HORIZONTAL TYPE

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" Series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB , ISI marked complete with connections, testing and commissioning etc. as required.Single pole (Street Light)

Do as per sl no. 65 specification but for Single Pole Neutral

Do as per sl no. 65 specification but for Triple Pole

Supplying the following Size PVC/ XLPE insulated PVC seathed Alluminium aromour cable of 1.1 kV as per IS 1554 etc as reqd. as per mention specification but for 4 core 10 Sq mm

Do as per sl no. 74 specification but for 4 core 6 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. a- 4 core 10 sq.mm

Do as per sl no. 76 specification but for a- 4 core 6 sq.mm

INCOMER

Circuit Breaker Rating - 315 Amp 35KA 4P MCCB

Current Transformer-

Ratio: 100/5A

CL:1 & 5P10, 15VA

Relays-

IDMT 2 O/C+1 E/F RELAY

METERS-

Set of indication Lamp-

Red-OFF

Green-ON

White-Trip Circuit Healthy

Amber-Trip Condition

Set of fine wiring, Ferrules & Fuses.

Power Pack 230V AC/24V DC Supply

BUS BAR

TPN Aluminium bus bar with heat Shrink Sleeve rated for 300A.

OUTGOING

1 no. 63A 10 KA 4P MCB (GROUND FLOOR DB-1)

1 no. 40A 10 KA 4P MCB (GROUND FLOOR DB-2)

1 no. 63A 10 KA 4P MCB (FIRST FLOOR DB-1)

5 no. 63A 10 KA 4P MCB (SPARE)

Other items such as

1 set of control wiring

1 Set of designation plates

All Items complete as above

EARTHING

Earthing with G.I earth pipe 2 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required

Earthing with GI Coil including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with Charcoal and Salt as required

FITTING & FIXTURE-:

Supplying of PVC Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting Frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved make including with all,., materials & labour..(Make Usha-Crisp Air or Equiv.-HYBEC/Havells/Bajaj)

Supplying of 1200 mm energy efficient ceiling fan as per EIC of approved make including with all,., materials & labour. .(Make Usha-Striker or Equiv.-HYBEC/Havells/Bajaj)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supply of 10W-12W recess mounting type LED luminaire, IP 20 ,colour temperature 6000K having efficacy not less than 80 lm/W, THD ≤ 20%, die cast aluminium/polycarbonate housing including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required. Fixture Similar to Wipro Cat No.: LD80-101-XXX-60-XX or Equivalent

Supply of 15W-20W surface mounting type circular downlighter LED luminaire, IP 20 ,colour temperature 6000K having efficacy not less than 85 lm/W, THD ≤ 20%, die cast aluminium/polycarbonate housing, suitable diffuser, inbuilt electronic driver, including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required. Fixture Similar to Wipro Cat No.: LD80-171-XXX-60-SM or Equivalent

SITC of 2'x2' 36-40W recess mounting type LED luminaire, IP 20 ,colour temperature 5700K having efficacy not less than 100 lm/W CRCA housing, suitable diffuser, inbuilt electronic driver, including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required.Fixture similar to WIPRO CAT : CRCO10R038HP57GL1 or equivalent

Supplying and fixing of ISI : 2312 marked Turbo Heavy Duty motor metal exhaust fan of 600 mm Sweep

Supply and fixing of 32a SP Way Plug & Socket Distribution Box on a suitable metal box concealed in wall for power supply to heavy duty machineries including all interconnections as required near the proposed machine locations at 5 ft from the floor level.(Legrand/Siemens/L&T)

Supply and fixing of 64A SP Way Plug & Socket Distribution Box on a suitable metal box concealed in wall for power supply to heavy duty machineries including all interconnections as required near the proposed machine locations at 5 ft from the floor level.(Legrand/Siemens/L&T)

Plinth Protection

Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge

Supplying and filling approved sand as per IS:383 including cost of sand, transportation to site, spreading, watering, ramming and compacting in layers of 15cm loose thickness to 95% relative density as per IS: 2702 Part (XIV) including preparation of sub grade, dressing to the required slope with all leads and lift etc. as per drawing, specification and direction of site Engineer.

Providing and laying Plain Cement concrete ( PCC ) M 10.0 ( 1:3:6 )grade concrete (Minimum Cement content- 210kg/cum) in position, machine mixed concrete of specific grade by using nominal size well‐graded approved quality aggregate at all levels as per design having mix minimum cement content as per specification vibration / compaction, curing, scaffolding, testing etc. as directed by Engineer in charge, etc. complete.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

Drain Work

Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum

Providing and laying plain cement concrete 1:4:8 (1 part cement: 4 parts coarse sand: 8 parts of graded stone aggregate 40mm max. size) in foundation, footing for columns, floor (sub base), including from work, mixing, placing, compacting, curing etc. all complete as per specification and directed by the Engineer.

Supply and placing in position high yield deformed bars reinforcement (conforming to IS: 1139)/Cold Twisted deformed bars reinforcement (conforming to IS: 1786), for RCC work including the cost of steel straightening, cleanning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG blck soft annealed binding wire at every intersection.

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying.

Providing and laying flyash brick masonry work in cement mortar 1: 4 (1 cement: 4 coarse sand) as per specifications in one or more brick thickness and in any shape including providing recesses, opening, scaffolding, staging, curing, finishing the joints flush below ground level and raking out joints in and above plinth level.

Providing and laying 25mm damp proof course with cc (1:2:4) using 12mm size hard granite chips in walls, including form work, mixing, placing, compacting, curing etc. all complete as per specification and directed by the Engineer In Charge.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

Providing 16mm. thick cement plaster in mortar 1: 6 (1 cement : 6 coarse sand) and on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer.

Providing cement punning on newly plastered surface wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by Engineer In Charge.

LANDSCAPE & HORTICULTURE WORK

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (Ref. DSR 2018 2.1)

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). (Ref. DSR 2018 2.2)

Supplying and stacking of sludge at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). (Ref. DSR 2018 2.3)

Supplying and stacking at site dump manure from approved source, including carriage upto 1 km complete (manure measured in stacks will be reduced by 8% for payment) : Do as per mention specification but for Screened through sieve of I.S. designation 20 mm (Ref. DSR 2018 2.4.1)

Do as per specification sl no. 134, but for Screened through sieve of I.S. designation 16 mm (Ref. DSR 2018 2.4.2)

Do as per specification sl no. 134, but for Rough dressing the trenched ground including breaking clods. (Ref. DSR 2018 2.5)

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. (Ref. DSR 2018 2.6)

Fine dressing of the ground. (Ref. DSR 2018 2.7)

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). (Ref. DSR 2018 2.8)

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge (Ref. DSR 2018 2.9)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : do as per mention specification but for Holes 90 cm dia, and 90 cm deep (Ref. DSR 2018 2.14.2)

Do as per sl no. 142 specification but for Holes 60 cm dia, and 60 cm deep (Ref. DSR 2018 2.14.3)

Do as per sl no. 142 specification but for Holes 45 cm dia, and 45 cm deep. (Ref. DSR 2018 2.14.4)

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) do as per mention specification but for Trees Plant (Ref. DSR 2018 2.57.1) do as per mention specification but for Trees Plant (Ref. DSR 2018 2.57.1)

Do as per sl no. 145 specification but for Shrubs Plant (Ref. DSR 2018 2.57.2)

Do as per sl no. 145 specification but for Hedge Plant (Ref. DSR 2018 2.57.3)

Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.4)

Supply and stacking of Bauhinia purpurea (Kachnar) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.7)

Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.10)

Supply and stacking of Callistemon lanceolatus plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.14)

Supply and stacking of Cassia fistula (Amaltash) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.16)

Supply and stacking of Ficus benjamina (green) plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Foxtail palm plant of ht. 120-150 cm bottom girth 15-20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.42)

SHRUBS

Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. (Ref. DSR 2018 3.18)

Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. (Ref. DSR 2018 5.1)

Supply and stacking of plant Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. (Ref. DSR 2018 8.5)

Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranchesed, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. (Ref. DSR 2018 3.44)

Supply and stacking of plant Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm as per direction of the officer-in-charge. (Ref. DSR 2018 8.25)

Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-incharge. (Ref. DSR 2018 5.32)

Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. .(Ref. DSR 2018 10427)

Supply and stacking of Lagerstroemia flosreginae plant of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge. (Ref. DSR 2018 7.50)

Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha,Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-incharge. (Ref. DSR 2018 9.4)

GROUND COVERS PLANTS

Providing and Displaying of of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. (Ref. DSR 2018 6.10)

Providing and Displaying of Dianella variegated plant, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. (ef. DSR 2018 6.11)

Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. (Ref. DSR 2020 6.12)

SHADE LOVING PLANTS

Providing and displaying of Dracaena warneckii having ht. 30 cm to 45 cm. with good colour foliage, well developed, fresh and healthy in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. (Ref. DSR 2018 3.55)

Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. (Ref. DSR 2018 3.59)

Providing and displaying of Schefflera high colour plant, having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. (Ref. DSR 2018 3.85)

Providing and displaying of Syngonium golden plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. (Ref. DSR 2018 3.91)

M VENKET RAO (BID ID -2874811)