IMPROVEMENT TO FLOORS, ROOFS AND SANITARY FITTINGS IN BUILDING NO. T-133 AT INS AGRANI COIMBATORE

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

M & L non skid ceramic tiles 7 to 8 MM thick(Sqare/rectanglar) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles. All as specified and directed.

S&F coloured glazed cermic tiles in verical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.all as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick for laying floor finshes in CM 1:6.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces CM 1:4

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work

2. S & F mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters Fe-410W (Grade E-165) complete all as specified and directed.

Taking down cement platster of any description including racking out joints,hacking for key scrubbing down with water etc, all as specified and directed.

M/L rendering 10mm thick on fair face of brick work or concrete surfaces in cement mortar 1:6 as in internal plastering , finished even and smooth without using extra cement.

M/L rendering 10mm thick as backing coat on fair face of brick work or concrete surfaces in cement mortar 1:4 in external plastering , and 5mm thick final coat in CM 1:4 with approved water proofing powder over the backing coat, finished even and smooth without using extra cement.

M&L for preparation of newly plastered surface of walls and applying two coats of cement based paint priming with alkali resistant priming paint.

M & L rendering 10 mm thick in CM 1:6 on walls and applying three coat of whitewash incl preparation of newly plastered surfaces.

Demolition of Cement Concrete(Un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L 75 mm thick PCC type C-2, 1:3:6 (40 mm graded aggregate ) finishing even and smooth without using extra cement for plinth protection.

S&FVitreous China wash basin,white, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper, placed and fixed (including brackets) fixed in repairs.

S&F CP Pillar cocks with aerator (quarter turn) screwed for iron/upvc pipe and fixed. Bore of pipe 15mm, fixed in repairs. Make : Parryware G1102A1

S&F Tubular towel rail,brass chromium plated, 20mm dia, D type, 60cm long between flangesetc, fixed in repairs.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F PVC valveless, syphonic action type, flushing Cistern, 10Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets, complete, fixed in repairs.

S&F CP Bib Cock with aerator, screwed for iron/upvc pipe and fixed, 15mm dia,fixed in repairs.

S&F Chromium plated fancy type brass Stop valves/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,15mmdia, fixed in repairs.

42. S&F PVC connections 15mm size with PTMT nuts of length 450mm.

S&F Brass chromium plated Health faucet with hose (1.5m) and hook

Taking down shutters of any description, area exc 1 sqm and not exc 2 sqm each.

Refixing of shutters of any description, area exc 1 sqm and not exc 2 sqm each.in the same opening

S/F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS squre tube.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S/F aluminium anodized barrel tower bolt of extruded section, 125 mm long.

S/F but hinges medium weight, cold rolled, mild steel 100mm

S/F aluminium handles cast type,anodized 125mm long.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm bore.

Ditto all as above, but 20 mm bore.

M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings, 15 mm dia

M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings,20 mm dia

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe)

Push tap any colour screwed for iron pipe and fixed, (Minimum weight 15mm-50gms

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms

M&L Soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repair

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S& F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,50mm dia, fixed to walls.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,75mm dia, fixed to walls.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110mm dia

S&F PVC (SWR) Bends 50mm bore.

S&F PVC (SWR) Bends 75mm bore.

S&F PVC (SWR) Bends 110 mm bore.

S/F PVC(SWR) floor trap,plain with grating, including jointing with solvent cement,75mm.

S/F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement.

PVC (SWR) vent cowl 75mm

M&L for casing caping point wiring with multistranded colour code copper conductor FRLS cable 1.5 Sqmm size 1100 volts grade conforming to IS:694 in GI boxes of 1.6 mm thick including one coat of synthetic enmelled black paint including 3 mm laminated sheet with brass screws including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same casing caping all as specified and directed by Engr-in-charge for one light /fan point controlled by one switch. Make of Cable : Finolex,Havell's, Polycab Make of Casing Caping : Finolex, Modi, Supreme

S&F submain wiring with multistranded colour code copper conductor in PVC conduit with FRLS cable 2 x 4.0 Sqmm size 1100 volts grade conforming to IS:694 single core stranded FRLS copper conductor 4.0 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in concealed PVC conduit. Make of Cable : Finolex,Havell's, Polycab Make of Conduit : Precision/Polycab/Plaza

S&F switch piano flush type single pole 1 way 5 A.

S&F Sheet metal enclosure for DB's double glazed door IP-43 Single pole & neutral 4 way with cable end box conforming to IS-8623-1 & 3, IEC 61439-1 &3 made in CRCA sheet steel, RAL 9003 powder coated ready to use DB's provided with 100 A insulated phase bus bar, neutral bar with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnection wire set, cable ties, blanking plates and circuit identification label with provision for DP MCB as incomer and SP MCBs as outgoing complete all as specified and directed by Engr-in-Charge. NOTE : (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch 'A'. Make/Model : Cat Part No. DBSPN004GD of make L&T or Cat Part No. CSDBSPNSDCA04 of C&S or equivalent in Schneider.

S&F DP MCB 32/40 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 15 KA breaking capacity conforms to IS/IEC 60947-2 and terminal box suitable upto 35 sqmm cable complete all as specifed and directed. Make/Model : Cat part No. BB20320C of make L&T or Cat part No. CSMBS2C32 of make C&S or equivalent in Schnider.

S&F single pole MCB 6 to 16 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 15 KA breaking capacity conforms to IS/IEC 60947-2 and terminal box suitable upto 35 sqmm cable complete all as specifed and directed. Make/Model : Cat part No. BB10060C of make L&T or Cat part No. CSMBS1C6 of make C&S or equivalent in Schnider.

M&L ceiling rose 3 phase/PVC/polycarbonate, isolated body.

S&F Endura Linear Neo surface/wall mounted LED 20/22 watt battern extruded aluminium housing provided for efficient heat dissipation with polycarbinate diffuser & integrated electronic driver including connection from ceiling rose with three wires complete all as specified and directed. Make : Cat part No.ENDURALINEARNEOBS22WLED865SPCWH of make Havell's or LL20-221-XXX-65AL1 of make Wipro or equivalent in Philips.

G Perumal and co