Construction of Pre-Fab Hut With Toilet at Humchi Sydpora.

Earth work in excavation by manual /mechnical means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead as directed from edge of cutting All kinds of soil.

Supplying and laying Dry stone soling dully hand packed tightly including ramming , watering and with all carriages up to the site of work .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all level ( 1:4:8 (1 Cement: 4 corse sand: 8 grade stone aggregate 40mm nominal size) crushed including all carriages up to the site of work .

Providing and laying in position of cement concrete Of specifed grade including curing but excluding the cost of centering shuttering, all works up to plinth level with 1:1:5 :3 including cost of carraige of material

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels ( 1:2:4 (1Cement- 2 fine sand: 4 grade stone aggregate 20mm nominal size). Crushed including all carriages up to the site of work .

Centering and shuttering including strutting propping etc. and removal of form work in foundation footings basis of colums etc

Brick work with F.P.S bricks in class designation 75 in superstructure up to all floors in cement mortar 1 cement :4 fine sand mortar including cost of scaffolding and carraige of material up to the site of work.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge including wastage ,tower bolts .handles ,4mm glasses ,carraige up to the site of work ( Powder Coated Aluminium Work

Providing and fixing Structural steel work in built up sections, trusses and framed work incl Ms sheet for soffits and evaes boarding, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing with High rib colour coated GS sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers incl riges and hibs all complete.

Cement concrete flooring 1:2:4 ( 1cement 2 coarse sand :4 graded stone aggregates ) finished with a floating coat of neat cement slurry but excluding cost of nosing of steps etc.complete.50mm thick 20mm nominal size stone aggregate crushed.

Providing and fixing wall panells 40mm thick polyurethence foam (Puff Pannel) Including cost of corner plates ,bottom channels ,lock handles hinges etc of approved brand & manifacture .

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI : 12701 mashed indicating the BIS license no .with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but including all fittings and the base support for tank syntax)or equilant having valid ISI license complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.including cost of PPR fittings like tee,elbow,sockets etc complete job.including cost of all PPR fittings like male ,female,socket,elbow,tee,union etc complete job.PN-16 pipe ,25mm OD(SDR-7.4)

PN-16 pipe ,-32mm OD(SDR-7.4)

Providing and fixing of pvc prince pipes ( prince /finolex /jindal make ) pipes ( type B ) in proper graident in excavated trenches including jointing and refilling the excavated material complete including cost of excavation. And fixture all complete job.100mm

Providing and fixing of pvc fittings.75 mm plain Bend

75 mm d.bend

75 mm floor trap

Dia clif

100 mm plain Bend

100 mm d.bend

100 mm floor trap

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing PTMT soap dish holder

Providing and fixing PTMT towel rail complete

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing of water closet squatting pan Engish type W.C. pan) with 100mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware /Or equilent with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.19.26.1 With common burnt clay (non modular) bricks of class designation 7.5

Providing and fixing kitchen sink including making all connections excluding cost of fittings :White glazed fire stainless steel sink of size 600x450x250 mm

Providing and fixing of thermo heated water storage gyser of approved brand havels or equilvent including all nessacarry fitting 50 ltrs

Lighting point (one lighting point includes wiring of lighting point in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulated multistrand copper wire,6 amp one way swittch6 amp S pole MCB,10 amp DP MCB,2 way DB MCB and hylem sheet with 16/15 Watt LED surface lights.including cost of channelsas per requirement.One point controlled by one 6 amp switch.( upto 10 meters)including Placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC Work.incl cost of service line

Providing and fixing one fan point includes wiring for lighting points in 1.5sqmm pvc insulated copper wire and 2.5sqmm pvc in multi -strant copper wire 1200mm ceilling fan electronic fan dimmer.6Amp s pole MCB-10AMP DP MCB 2 Way DB for housing MCB or lightting circuits and hylem sheet.including Placing and fixing in position Fan clamp boxes with MS Fan clamps connected with network Conduit pipes with necessary fittings in RCC Work (usha, bajaj, crompton)

Providing and fixing of heating point including all items required as desire at site complete job.

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-415 or Fe-500D or more as per requirement of structural Design Including carraige of material involved septik both Ways /Sokage

12mm thick cement plaster on rough side of single or half brick / concrete wall of mix 1:6 mix ( 1cement:6 coarse sand incl. cost of scaffolding complete and carraige of material .

Dry Rubble masonary with hard stone in foundation and plinth using quarry stone with bond stones.

Providing and fixing OF sink mixer of approved brand as directed