REPAIR/MAINT OF DG SET, VOLTAGE STABILIZERS, SLIDING DOOR, LIFT, MOTORIZED ROLLING SHUTTER, AMF PANEL, COMPREHENSIVE MAINT OF LIFT SAND COMPRESSOR AND OTHER MISC E/M WORKS AT TECH AREA, VSB AT 7 BRD, AF UNDER GE (AF) TUGHLAKABAD

Amount

M&L for dismantling of upper cover of servo Voltage stabilizer of capacity upto 10 kVA after disconnecting electrical connections for overall servicing, cleaning of dust and replacement of complete old wiring with FRLS copper conductor of suitable size in proper layout and tight with tie, including replacement of all unserviceable parts i.e Electronic sensing card(PCB), micro processor based panel, Potentiometer, RC network with box, 6/12 pin connector, indicator, servo motor or any other parts and fixing complete including testing all as specified and directed by Engr-In-Charge. Note: Replacement of any unserviceable parts will be measured and paid separately under relevant items except replacement of old wiring which are deemed to be includd in the quote rate.

All as per item ser No 1 here-in-above but of capacity above 10 KVA and upto 30 KVA

All as per item ser No 1 here-in-above but of capacity above 30 KVA and upto 50 KVA

All as per item ser No 1 here-in-above but of capacity above 50 KVA and upto 100 KVA

All as per item ser No 1 here-in-above but of capacity above 100 KVA and upto 150 KVA

All as per item ser No 1 here-in-above but of capacity above 150 KVA and upto 200 KVA

All as per item ser No 1 here-in-above but of capacity above 200 KVA and upto 300 KVA

Supply only Electronic sensing/circuit card (PCB) suitable for servo voltage stabilizers. Make - Vintek Electronics/volina

Supply and fixing in replacement servo motor 3 Kg Torque suitable for servo voltage stabliser of capacity upto 50 KVA complete all as specified and directed by Engr-in-charge.. Make Vintec Electronic

Supply and fixing in replacement servo motor 10 Kg Torque suitable for servo voltage stablizer of capacity 100 KVA to 300 KVA. Make Vintec Electronic/volina

Supply and fixing in replacement Electronic Sensing / trigger transformer suitable . Make vintec electronic/volina

Supply and fixing in replacement amp meter 0-500 A suitable for servo voltage stabilizer. Make Vintec Electronic/volina

Supply and fixing in replacement voltmeter 0-500 V suitable for servo voltage stabilizer. Make AE/L&T

Supply and fixing in replacement RC Network suitable for 3 kg servo motor complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement RC Network suitable for 10 kg servo motor complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement Box for RC network complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement 6/12 pin as required at site as per capacity of voltage stablilizer complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement Carbon bush of suitable size upto the capacity of 10 KVA to 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina.

Supply and fixing in replacement Indicators of RYB of suitable size upto the capacity of 10 KVA to 300 KVA voltage stabilizer complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement PCB holder suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement rotary switch 5 Amp for R, Y, B phase suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement Microprocessor based control card suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement Push button switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement auto manual switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing in replacement DPDT switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Supply and fixing micro switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina

Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 10 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 30 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 50 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 100 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 150 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 200 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 300 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 10 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 30 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 50 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 100 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 150 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 200 KVA complete. Make- Vintek Electronics/volina

Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 300 KVA complete. Make- Vintek Electronics/volina

Supply and filling Transformer Oil for top up as required suitable for voltage stabilizer all as specified and directed . Make : Power oil

M&L for Preparation of old painted surface of Servo Voltage stabiliser by scrapping / removing old paint , dirt etc, and spray painting with two coats of blue synthetic enamel paint over a coat of primer including writing of MES / SM No of capacity UPTO 150KVA all as specified and directed by Engineer-in-charge. Note: for item 01 to 42 (i) The tenderer shall submit original copy of MOU executed / made with OEM such as M/s VINTEK ELECTRONICS/ VOLINA before the commencement of work. (ii) The repair work of Voltage stabliser shall carried out by experienced technician expert provide by OEM.

Supply & Fixing in replacement MCCB 400 Amps 4 Pole breaking capasity 36 KA,415 V,ICS=75 % of ICU Adjustable type with fastening elements including taking down old unsv mccb, complete all as per existing type and directed by Engr-in-charge. Make:- Havells/ Standard/ Legrand

Supply & Fixing in replacement MCCB 160 Amps 4 Pole breaking capasity 36 KA,415 V,ICS=75 % of ICU Adjustable type with fastening elements including taking down old unsv mccb, complete all as per existing type and directed by Engr-in-charge. Make:- Havells/ Standard/ Legrand

Supply and fixing in replacement on-load changeover switch 200A, 415 Volts, 4 Pole incl taking down existing burnt unsv on-load changeover switch complete all as specified and directed. Make: Havells/ Standard/L&T.

Supply and fixing in replacement on-load changeover by pass switch 320A, 415 Volts, 4 Pole with fastening element including taking down existing burnt unsv on-load changeover switch complete all as specified and directed. Make: Havells/ Standard/L&T.

Supply and fixing on-load changeover by pass switch 800A, 415 Volts, 4 Pole with fastening element incl taking down existing burnt unsv on-load changeover switch complete all as specified and directed. Make: Havells/ Standard/L&T.

Supply & fix in replacement three phase sliding gate motor powerful with a mximum gate weight capacity 2000 kg, 400 V-3 phase electromechanical gear motor sliding gates for industrial hangers up to 2000 kg complete with encoder,Control Unit 400 V- EVO 2000 T, magnatic limits safe and precise for slowing down in opening and closing, 50 HZ,Motor speed 52 rpm, Rated power output of motor 500 W, Output shaft height 58.5 Meter, Output torque 26 N-m, noise ≤ 60 db, Duty cycle S 2 15 Minutes, limit switches, Enviremental temperature -20 degrre C to + 40 Degree C, Gate Move speed 12 m/Min for horizontal rack and pinion including remote transmitter comlete with fixing plate and fixing screws in and including fabrication/welding work for proper alignment of rack and pinion of motor installed complete in every respect incl taking down all as specified and directed by engineer in charge. Make: Telcoma EVO2000 T

M&L in replacement motor and inbuilt gear assy of spike barrier from site and fixing new motor of capacity 750 Watt single phase 230 Volt and inbuilt gear assy and making all electrical connection and spike barrier made serviceable including serviceing, cleaning, greasing of shaft complete and making serviceable condition inlcuiding testing incl taking out all as specified and as directed by Engr-in-charge Note : (i) cost of any unserviceable parts will be measured and paid seprately under the relavent items. (ii) Cost of cutting , welding at site for cleaning, greasing of shaft are to be included in the quoted rate. Make:- RUDHAR/GREY/ OR EQUIVALENT APPROVED BY GE

Supply and fixing in replacement of u/s motor havimg capacity 750 watt single phase, 230 Volt AC and inbuilt gear assy with programing controller suitable to operate the existing system complete for smooth operation of spike barrier all as specified and as directed by Engr-in-charge.Make:- RUDHAR/GREY/ OR EQUIVALENT APPROVED BY GE.

Supply and fixing in replacement of u/s bearing of size 63/11 2Z complete all as specified and as directed by Engr-in-charge. Make SKF

Supply and fixing in replacement of u/s housing for bearing of size 63/11 2Z complete all as specified and as directed by Engr-in-charge

Supply and fixing in replacement of Key switch for motorised shutter as per sample provided complete including making connection and good distubed surface nearby the key switch all as directed by Engr-in-charge

Supply and fixing in replacement of PCB card and relay compatible with side gear motor of make- ELERO suitable for motoriszed shutter as per sample provided by the department complete including making connection all as directed by Engr-in-charge

Material & Labour for locating the fault in Goods lift Make : ECE, Capapcity - 1088 Kg installed at PW-IV including rectification of defects, checking and rectifying loose connection of control panel, accessories etc including replacement of any unserviceable parts to keep the lift functional and making the free movement of entire unit as directed by Engr-in-Charge. Note : (a) Replacement of any unserviceable parts will be measured and paid separatly under relevant items (b) If complaint not attend within 24 hrs , penalty shall be charged @ 4 times of quoted rate.

Supply and fixing in replacement of door sensor suitable for existing lift and conforming to relevant IS complete all as specified. Contractor will submit test certificate from the manufacturer before execution the same.

Supply and fixing in replacement of PCB card suitable for lift controller as per exisitng complete all as specified and direted by Engr-in-charge

Supply and fixing in replacement of step down transformer 415/110V of capacity AC 350 VA for goods lift complete all as specified and direcetd by Engr-in-charge.

Supply and fixing in replacement of Limit switch suitable for existing lift complete all as specified and as directed by Engr-in-charge .

Supply & fixing in replacement of read switch suitable for existing lift complete all as specified and as directed by Engr-in-charge .

M&L for servicing of goods lift Make : ECE, Capapcity - 1088 Kg installed at PW-IV. The following work will be done in servicing:- (a) Cleaning of Lift room, Lift chamber, Lift (Inside and top of the lift) complete. (b) Oiling and greasing of concerned parts of lift with ISI marked oil and grease complete. (c) Checking of complete lift for smooth functioning and maintain the register sign by MES rep. Note : (a) If the lift is laying unserviceable for more than 24 Hrs due to any major fault the contractor will not claim the same item till the lift are made serviceable. (b) If complaint not attend within 24 hrs , penalty shall be charged @ 4 times of quoted rate.

M&L for dismantling of unserviceable electronic boom barrier for carrying out necessary repair of movement mechanism, gear assembly and motor or any other unserviceable parts (i.e control PCB card, inbuilt motor, push button, Boom upto 3mtr length , including cleaning, greasing , painting of booms of 03 mtrs (02 Nos) or 06 Mtr (01 Nos) of existing color with synthetic enamel paint as per site and servicing complete including refixing and testing the same after repair all as specified and as directed by Engr-in-charge.Make:- RUDHAR/GREY/ or equivalent approved by GE. Note : (i) Cost of any unserviceable parts (as mentioned above) are paid separately under the relevant items. (ii) New items shall match with the existing system in any cases for proper fitment. (iii) Any minor adjustment/modification for fixing the item if required at site contractor shall carry out at site without any extra cost. (iv) Due to security reason contractor will attend the complaint within 24 Hrs from the date of complaint lodge by user as per their complaint chart or as informed by the works section/MES rep and rectified the same at the earliest.

Supply and fxing in replacement of PCB control card suitable for operation of Boom barrier upto 3mtr length complete all as per site requirement and specified by Engr-in-charge. Make:- RUDHAR/GREY/ or equivalent approved by GE

Supply and fxing in replacement of motor suitable for operation of Boom barrier upto 3mtr length complete all as specified and as directed by Engr-in-charge Make:- RUDHAR/GREY/ or equivalent approved by GE

Supply and fxing in replacement of side gear motor of motorised shutter from site before diconnecting all incoming and outgoing connection and deposit to MES Store yard all as specified and as directed

Supply and fixing in replacement side gear motor of ELERO suitable for up and down movement of motorised shutter including other necessary accessories DFM 350 NHK , 3 Phase complete all as specified and directed by Engr-in-charge. Make:-ELERO/ ACM

Supply and fixing in replacement VVF drive of capacity 15 HP, 415 V 50 cycle including taking down old unsv drive complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of door lift master ( for 4 panel 1500 mm center opening car door mechanism with motor drive, with a door sill) complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of lift door shoe complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of lift channel guide complete all as directed by Engr-in-charge.

M&L in replacement of P 3 M C - R card and 3 PVS R 3 (inverter-BYP) sensing control including taking out of old u/s card (invertor control card ) suitable for 20 KVA UPS dismentling of unserviceable UPS of 20 KVA,designed for output 400 V opening its cover by unscrew its screw for carrying out necessary inspection and to find out the fault including cleaning and repair/replacement of unserviiceable parts in and including line syncronisation adjustment,L1 phase DC balance adjustment,L2 phse DC adjutment, PLL mode frequeny adjustment , L1 phase output voltage fine adjustment, L2 phase output voltage fine adjustmen,L 3 phase output voltage fine adjustment and L3 phase DC balance adjustment complete all as specified and directed by Eng in charge.. Note: repair and service will be carry out by only by authorised compnay representative. Make: APLAB/MICROTECK/SUKAM

Replacement of P 3 M C - R card and 3 PVS R 3 (inverter-BYP) sensing control supply in and including taking out of old u/s card(invertor control card ) suitable for 30 KVA UPS in and including Repair of charger card (REC3P).dismentling of unserviceable UPS of 30 KVA,designed for output 400 V.make APLEB by opening its cover by unscrew its screw for carrying out necessary inspection and to find out the fault including cleaning and repair/replacement of unserviiceable parts in and including line syncronisation adjustment,L1 phase DC balance adjustment,L2 phse DC adjutment, PLL mode frequeny adjustment , L1 phase output voltage fine adjustment, L2 phase output voltage fine adjustmen,L 3 phase output voltage fine adjustment and L3 phase DC balance adjustment complete all as specified and directed by Eng in charge. Note: repair and service will be carry out by only by authorised compnay representative. Make : APLAB/MICROTECK/SUKAM

M&L in replacement sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 4 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 2.5 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

M&L for servicing of electric motor of capacity upto 15 HP coupled with compressor having capacity 566 lit per min installed at spyder including disconnecting from air compressor, cleaning, rewiding using existing guage material, greasing, insulating paper, varnishing and filling, replacement of bearings,, reassembling the motor etc including testing complete all as specified and as directed by Engr-in-charge.

Servicing of air compressure any type any make coupled with Electric motor installed at Spyder including calibration, replacement of release valve upto 40 mm, oil top-up as required at site, replacement of air filter, shaft, oiling, greasing etc and necessary replacement of wornout bolts, nuts, washers, gaskets etc. re-assembling the compressure with motor, commissioning and testing to the entire satisfaction of Engineer-in-charge .

servicing of standby DG Set of capacity upto 50 KVA complete including draining out of diesel from tank , cleaning the fuel tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil to it’s required level, replacing the fuel filter, lubricating oil filter, Check & clean air cleaner, change air cleaner elements, Check coolant level & make up the same, Drain the Fuel filter & water separator, filling the starting batteries with electrolyte/Distilled water to maintain the required specific gravity, replace the u/s brass Connectors for batteries, Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors, changing of V-belts, changing hoses and clips of air cleaner, checking of exhaust leakage, governor, breathers etc, adjust/set the same for proper functioning of DG Set, Checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for Satisfactory running of DG set for two hour at connected. Load & record shall be made in respect of RPM, oil pressure, oil temp, Coolant temp. Voltage, frequency, load current, Battery charging, fuel consumption etc. as directed by the Engr in charge. Make – Kirloskar/ Cotton Greaves/ Cummins. Note :- 1. Fuel filter, lubericating filter, air filter, distill water, Engine oil, brass connector, hose pipe set will be measured and paid Separately. 2. Coolant for make up will be measured & paid separately. 3. DHPP will be issued by dept for testing only.

All as per srl item no.76 but for 50 KVA to 100 KVA capacity DG set

All as per srl item no.76 but for 100 KVA to 180 KVA capacity DG set

S&F in repair of diesel fuel filter suitable for DG set of capacity upto 180 KVA complete all as specified and directed by Engr-in-charge.

S&Fin repair of lubricating filter suitable for DG set of capacity upto 180 KVA complete all as specified and directed by Engr-in-charge.

S&Fin repair of air cleaner/ filter suitable for DG set of capacity upto 180 KVA complete all as specified and directed by Engr-in-charge.

S&F in repair of brass terminal for batteries all as specified and directed by Engr-in-charge.

S&Fin repair of Hose pipe set suitable for DG set of capacity upto 50KVA complete all as specified and directed by Engr-in-charge.

All as per srl item No.83 here-in-before but for 50 KVA to 100 KVA DG set.

All as per srl item No.83 here-in-before but for 100 KVA to 180 KVA DG set.

S&F in replacement of DG set acoustic enclosure door lock/ door hinges suitable for capacity 30 KVA to 180 KVA complete all as specified and directed by Engr-in-charge.

Supply and filling lubricating oil 20W40 for DG Sets as per manufacturer's recommendation. Make - IOC/ Castrol/Hindustan Petroleum.

Supply and filling coolant for Radiator as per manufacturer's recommendations.

S&F in replacement of unserviceable water pump assembly rating upto 100KVA DG set all as specified and directed by Engr-in-charge.

Servicing/ Reconditioning of 90/150/180AH battery with change electrolyte, cell and l all connecting element and bettry termina complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of Engine safety unit (ESU) for DG set of capacity upto 180 KVA complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of unserviceable VAF meter including taking down unsv complete all as specified and directed by Engr-in-charge. Make:- nippon or equivalent approved by GE.

Supply and fix in replacement of oil sensor including taking down unsv complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of unserviceable water line socket for capacity upto 180 KVA including taking down unsvcomplete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of unserviceable Turbo charger kit upto 180 KVA DG set complete all as specified and directed by Engr-in-charge.

Servicing of radiator assembly by removing from engine transporting to the workshop and removing the sediments and scales, corrosion etc by means of acid cleaning and high pressure water washing and air cleaning, gas welding / soldering with good quality materiaL for stopping the leakage etc, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with new clips complete as required for upto 82.5 KVA DG Set complete all as specified and directed by Engr-in-charge.

All as per srl item no.96 here in before but for 82.5 KVA to 180 KVA DG set.

Supply & fix in repair of New digital RPM Meter of DG Set up to 180 KVA complete all as specified and directed by Engr-in-charge Make:- Nippon or equivalent as approved by GE.

Supply & Fix in replacement of PVC insulated with standard copper conductor cable 2 mtrs length each soldered with 2 Nos gun metal battery terminals suitable for 180 AH 240 volts DC battery complete all as specified and directed by Engr-in-charge.

Supply only distilled water in one litre container complete all as specified and directed by Engr-in-charge.

Supply only sulphuric acid for lead acid battary in one litre container complete all as specified and directed by Engr-in-charge.

M&L for servicing of self starter assembly of DG Set 24 volts by disconnecing the self starter from the engine and transport to workshop for carryout servicing by replacing all unserviceable spare parts including pinion, armature, corbon brushes, commutator, field coil, bushes, contacts, copper plates, jumping leads ets and replacing the filled coil and varnishing all as directed and specified by Engr-in-charge.

Dismantling existing fuel injection pump of DG set of capacity from 30KVA to 180 KVA, transporting to work shop and servicing complete including replacement of plunger, spring,nozzle assembly ,calibrating and re-fixing the same and testing the DG Set to the entire satisfaction of Engineer-in-charge.

M&L for maintenance of Engine compatible with 100 KVA DG set after opening/ dismanteling enginge from DG set, transporting to workshop , including replacement of all neccesary burnt spare parts like cylinder head, cylinder head valve, cylinder head seat, cylinder head guide, wall seal, push guide box, front and rear oil seal, cylinder head bolt, washer, valves, valve spring, inlet valve seat insert, exhaust valve seat insert, valve guide, cylinder head reconditioning kit, sealing ring bottom, sealing ring cap, rocker arm adjustment screw, oil metering screw, bush for support, rocker cover, gasket for rocker cover high temperature application, ball bearings, rubber sleeve, fuel pipe, header botto and top etc, required to keep the engine in satisfactorily functional condition with all adjusting timing of fuel supply, cam shaft,crank shaft complete all as specified and directed by Engr-in-charge.

M&L for maintenance of Engine compatible with 82.5 KVA DG set after opening/ dismanteling enginge from DG set, transporting to workshop, including replacement of all neccesary burnt spare parts like cylinder head, cylinder head valve, cylinder head seat, cylinder head guide, wall seal, push guide box, front and rear oil seal, cylinder head bolt, washer, valves, valve spring, inlet valve seat insert, exhaust valve seat insert, valve guide, cylinder head reconditioning kit, sealing ring bottom, sealing ring cap, rocker arm adjustment screw, oil metering screw, bush for support, rocker cover, gasket for rocker cover high temperature application, ball bearings, rubber sleeve, fuel pipe, header botto and top etc, required to keep the engine in satisfactorily functional condition with all adjusting timing of fuel supply, cam shaft,crank shaft complete all as specified and directed by Engr-in-charge.

S&F in repair oil Pressure gauge of DG set up to 180 KVA complete all as specified and directed by Engr-in-charge.

Supply and fxing in replacement of PCB control card suitable for operation of Boom barrier upto 3mtr length complete all as specified and as directed by Engr-in-charge

S&F in repair sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 1.5 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fixing in replacement of MCB 4A, single pole ,240V C curve, bearking capacity, Icu 10 KA, degree of protection IP 20, frequancy 50 Hz , including taking down old unsv complete all as specified and directed by Engr-in-charge. Make:- L&T/ C&S/ Schneider/indoasian

Supply and fixing in replacement of MCB 4A, Double pole ,240V C curve, bearking capacity, Icu 10 KA, degree of protection IP 20, frequancy 50 Hz , including taking down old unsv complete all as specified and directed by Engr-in-charge. Make:- L&T/ C&S/ Schneider/indoasian

Supply and fixing in replacement of MCB 6A, single pole ,240V C curve, bearking capacity, Icu 10 KA, degree of protection IP 20, frequancy 50 Hz , including taking down old unsv complete all as specified and directed by Engr-in-charge. Make:- L&T/ C&S/ Schneider/indoasian

Supply and fixing in replacement of MCB 16A, single pole ,240V C curve, bearking capacity, Icu 10 KA, degree of protection IP 20, frequancy 50 Hz , including taking down old unsv complete all as specified and directed by Engr-in-charge. Make:- L&T/ C&S/ Schneider

Supply and fixing in replacement of MCB 32A, single pole ,240V C curve, bearking capacity, Icu 10 KA, degree of protection IP 20, frequancy 50 Hz , including taking down old unsv complete all as specified and directed by Engr-in-charge. Make:- L&T/ C&S/ Schneider

S&F in replacement of MCCB 3 pole, 125 Amps with breaking capacity 16 KA, 415 volts, adjustable thermal and adjustable magnetic setting, Ics = 75% of Icu, including taking down old unsv MCCB complete all as specified and directed. Make : L&T /Havells/ C&S

S&F in replacement of MCCB 3 pole, 160 Amps with breaking capacity 36 KA, 415 volts , adjustable thermal and adjustable magnetic setting, Ics = 75% of Icu, including taking down old unsv MCCB complete all as specified and directed. Make : L&T /Havells/ C&S

S&F in replacement of MCCB 3 pole, 250 Amps with breaking capacity 36 KA, 415 volts ,adjustable thermal and fixed magnetic setting, Ics = 100% of Icu,including taking down old unsv MCCB complete all as specified and directed. Make : L&T /Havells/ C&S

S&F in replacement of MCCB 3 pole, 400 Amps with breaking capacity 36 KA, 415 volts ,adjustable thermal and fixed magnetic setting, Ics = 100% of Icu, including taking down old unsv MCCB complete all as specified and directed. Make : L&T /Havells/ C&S

Supply & Fixing in replacement lead acid battery of 12 volts capacity 150 AH complete all as specfified and directed by EIC.

Supply & Fixing in replacement lead acid battery of 12 volts capacity 180 AH complete all as specfified and directed by EIC.

S&F in replacement of onload changeover 4 pole, 200 Amps, 415 volts including taking down old unsv changeover complete all as specified and directed. Make : L&T /Havells/ HPL

S&F in replacement of onload changeover 4 pole, 400 Amps, 415 volts including taking down old unsv changeover complete all as specified and directed. Make : L&T /Havells/ HPL

S&F in replacement of Power contactor 4 pole, 150 Amps, 415 volts including taking down old unsv contactor complete all as specified and directed. Make : L&T / LS / HPL

S&F in replacement of Power contactor 3 pole, 180 Amps, 415 volts including taking down old unsv contactor complete all as specified and directed. Make : L&T / LS / HPL

S&F in replacement of Power contactor 3 pole, 265 Amps, type MNX, 415 volts including taking down old unsv contactor complete all as specified and directed. Make : L&T / LS / HPL

S&F in replacement of Power contactor 3 pole, 650 Amps, type MNX, 415 volts including taking down old unsv contactor complete all as specified and directed. Make : L&T / LS / HPL

S&F in replacement of Power contactor 3 pole, 9 Amps, type MNX, 415 volts including taking down old unsv contactor complete all as specified and directed. Make : L&T / LS / HPL

S&F in replacement of HBC fuse link DIN type of rating 250 Amp 415volt, size 01, breaking capacity 80/100 KA complete all as specified and directed by Engr-in-charge. Make Havells/Standard/ FTC

S&F in replacement of HBC fuse link DIN type of rating 200 Amp 415volt, size 01, breaking capacity 80/100 KA complete all as specified and directed by Engr-in-charge. Make Havells/Standard/FTC

S&F in replacement of HBC fuse link DIN type of rating 400 Amp 415volt, size 02, breaking capacity 80/100 KA complete all as specified and directed by Engr-in-charge. Make Havells/Standard/FTC

S&F in replacement of HBC fuse link DIN type of rating 500 Amp 415volt, size 03, breaking capacity 80/100 KA complete all as specified and directed by Engr-in-charge. Make Havells/ Standard/FTC

S&F in replacement of battery charger in dg set control panel of capacity 24 VDC 10 AMP including taking down old unsv charger complete all as specified and directed by Engr-in-charge. Make:- NHP / Technika or equivalent as approved by GE.

S&F in replacement of battery charger in dg set control panel of capacity 12 VDC 10 AMP including taking down old unsv charger complete all as specified and directed by Engr-in-charger.Make:- NHP or equivalent as approved by GE.

S&F in replacement of Earth leakage relay in dg set of capacity upto 320 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger.Make:- Technika or equivalent as approved by GE.

S&F in replacement of under voltage relay in dg set of capacity upto 320 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger.Make:- Technika or equivalent as approved by GE.

S&F in replacement of on delay timer in dg set of capacity upto 320 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger.Make:- Technika or equivalent as approved by GE.

S&F in replacement of reverse power relay in dg set of capacity upto 320 KVA control panel including taking down old unsv charger complete all as specified and directed by Engr-in-charger.Make:- Technika or equivalent as approved by GE.

S&F in replacement of water pump suitable for upto 180 KVA DG set all as directed by Engr in charge

S&F in replacement of injector suitable for upto 180 KVA DG set all as directed by Engr in charge

S&F in replacement of radiator suitable for upto 180 KVA DG set all as directed by Engr in charge

S&F in replacement of fan suitable for upto 180 KVA DG set all as directed by Engr in charge

M/S Delhi Engineering Co.

M/s Prakash Enterprises

Bluemax Associate

Surjit and Sons