Construction of Zonal Veterinary Hospital at Barnoh Distt. Una (HP). (SH- Providing Electrical Installation and yard lighting thereof).

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box, Fan Box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and as per direction of the Engineer-in-charge.. Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box ,Fan Boxand earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and as per direction of the Engineer-in-charge.. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1/2 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required and as per direction of the Engineer-in-charge..(i)2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x10 Sq. mm.

2x16 Sq. mm.

4x4Sq. mm.+2x4 Sq. mm.

4x10 Sq. mm.+2x10 Sq. mm.

4x16 Sq. mm.+2x16 Sq. mm.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required and as per direction of the Engineer-in-charge..(i) 2 Pair/4pair

Supplying and drawing LAN cable CAT 6E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required and as per direction of the Engineer-in-charge..

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required and as per direction of the Engineer-in-charge. (i) 20 mm. dia

(ii) 25 mm. dia

(iii) 50 mm. dia

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required and as per direction of the Engineer-in-charge.. (i) S.P. 5/ 6 Amps one way Modular switch.

(ii) 5 pin, 5/ 6 Amps Modular socket outlet.

(iii) Telephone socket outlet, Modular.

(iv) S.P. 15/ 16 Amps one way Modular switch.

(v) 6 pin,15/16 Amps Modular socket outlet.

(vi) TV. Socket outlet, modular.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required and as per direction of the Engineer-in-charge..

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required and as per direction of the Engineer-in-charge.(i) 2 modules (78mmx78mmx50mm)

(ii) 6 modules(205mmx78mmx50mm)

(iii) 12 modules (205mmx135mmx60mm)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required and as per direction of the Engineer-in-charge..

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required and as per direction of the Engineer-in-charge..

Supplying and fixing bakelite batten/angle holder including connections etc. as required and as per direction of the Engineer-in-charge.

(ii) 450 mm deep (nominal)

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required and as per direction of the Engineer-in-charge.

Supplying and fixing copper strip bus-bars suitable for 300 Amp. 415 volts capacity 4 No. each of cross-sectional area (31.75mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required and as per direction of the Engineer-in-charge.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required and as per direction of the Engineer-in-charge.(i) 100 Amp. -10 KA

(ii) 250 Amp. -25 KA

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required and as per direction of the Engineer-in-charge.(i) 100 Amps.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and as per direction of the Engineer-in-charge. Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and as per direction of the Engineer-in-charge.(i) Double pole. Cat-A.

(ii) Triple pole & Neutral. Cat-A./ 4pole

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and as per direction of the Engineer-in-charge.. 63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required and as per direction of the Engineer-in-charge.. (i) 40 Amps. Cat-A.

(ii) 63 Amps. Cat-A.

Supplying and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for as required ( for horizontal run) / V ertical and as per direction of the Engineer-in-charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required and as per direction of the Engineer-in-charge.(i) Double door-12 way

(ii) Double door-16 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required and as per direction of the Engineer-in-charge..

Extra for using salt and charcoal for pipe earth electrode complete as required and as per direction of the Engineer-in-charge..

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required and as per direction of the Engineer-in-charge..

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required and as per direction of the Engineer-in-charge..

Supplying and fixing G.I. tape 25mmx3mm thick on parapet or surface of wall U/G for as required ( for vertical run)/Horizental and as per direction of the Engineer-in-charge.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required and as per direction of the Engineer-in-charge..

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size (i) Armoured cable 6 sq. mm (twin core)

(ii) Armoured cable 10 sq. mm (twin core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size and as per direction of the Engineer-in-charge.(i) Armoured cable 35 sq. mm (3.5 core)

(ii) Armoured cable 120 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size and as per direction of the Engineer-in-charge.(i) Armoured cable 35 sq. mm (3.5 core)

(ii) Armoured cable 120 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) or up to required length with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Model to be got approved from engineer in charge.(i) Ceiling Fan 1200 mm sweep, Category-A

(ii) Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, including shutter in heavy duty fan, connections, testing and commissioning etc. as required and as per direction of the Engineer-in-charge.(i) Exhaust Fan, Light duty, (Domestic) 300 mm sweep/vent air fan

(ii) Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and fixing of fancy wall bracket containing lamp holder (s) of all sizes and shapes, complete with all accessories but in/c led lamp including making connections, testing etc. as required of Bajaj/Havells/Decon and as per direction of the Engineer-in-charge. (i) Fixed type wall bracket 150 dia, single lamp.(Category-A)

(ii) Mirror light 610 mm, double lamp.(Category-A)

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but in/c Led lamp including making connections, testing etc. as required. and as per direction of the Engineer-in-charge.(i) Bulk head fitting, Led type (Category-A)

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required and as per direction of the Engineer-in-charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required and as per direction of the Engineer-in-charge.(i) 25 Liter capacity water heater (Cat-A)

Installation, testing and commissioning of pre-wired, fluorescent light fitting/ compact fluorescent fitting of all types complete with all accessories and tubes etc. including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm x 1.6 mm thick steel conduit unto 30 cm length, painting and wiring the down rods and connections with 16/0.20 mm twin twisted flexible, cotton braided, copper cable and earthing etc. as required and as per direction of the Engineer-in-charge.

Providing & fixing LED Batten integrated LED channel aluminum heat sink body of Bajaj make having Bajaj/ Havells / Philips make and as per direction of the Engineer-in-charge. Batten/LED integrated channel fitting 20W

Providing & fixing surface/ recess mounted 12/ 15W LED fitting/panel of Syska/Havells/Philips/ Panasonic/Bajaj make as required complete in all respectas approved by Engineer -in -Charge (i) 15watt

Supplying & fixing SKYLUKS LED surface mounting fitting 1'x1' LED panel/ luminaire of Panasonic /Bajaj/Havells/Philips/Syska 24/30WH WH and as per direction of the Engineer-in-charge.

Providing & Fixing LED Lamp of following capacity as approved & directed by engineer in charge of Syska/Havells/Bajaj 7 - 9 Watt and as per direction of the Engineer-in-charge.

Providing & fixing Skyluks efficient LED panel surface 4x 1ft of Bajaj /Syska Havells / Panasonic equivalent to Bajaj Code No. BZRSLL 36W GJI WH /NW complete in all respect fitting in ceiling as approved & directed by engineer in charge.

Providing & fixing LED panel/ fitting/ luminaire 2'x2' 36 W LED of Bajaj/ Havells /Crompton/Syska or its equivalent make equal to BZSQL 36W LED WH as approved & directed by engineer in charge.

Providing & fixing shock treatment chart as approved & directed by engineer in charge

Providing & fixing synthetic rubber mat shock proof of 2mtr x 1 mtr as approved & directed by engineer in charge.

Supply, installation, testing & commissioning o1.5tr/ 2 TR(cold) split type air conditioning unit with remote of following make complete as required in all respect with Base Frame , Refrigent copper piping , Hard PVC /Flexible drain pipe, PVC Round Cover 50mm dia upto required length including stabilizer & stand , modular industrial socket with MCB for AC as approved & directed by engineer in charge. (i) Voltas/Lloyd/LG/Blue Star 1.5 TR

(ii) Voltas/Lloyd/LG/Blue Star 2 TR

P/FFire extinguisher Water CO2 9 KG Type-IS-15683 as approved by Engineer -in -Charge

P/FFire extinguisher CO2 4.5 KG Type-IS-15683 as approved by Engineer -in -Charge

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Model to be got as approved & directed by engineer in charge. Ceiling Fan 1200 mm sweep Fusion Metallic Beige Brown /Pearl Ivory-Gold Havells

Providing & fixing LED street light fitting ln warm white colour with pressure die- cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection. As per CAT no. BRTFG 60W LED/W/W(Warm White ) complete in all respect.The fitting is to be fixed on existing bracket mounted on pole/on wall including wiring etcas required as approved and directed by engineer in charge of Bajaj/ Philips/ Havells make.

P/F 5 mtr OctagnolPole dip galvinisedsingle dip to average65 micron DFT and designed for wind speed of 169 KM/hour Bajajmake Pole Top dia 70mm bottom dia 130mmand thickness3mm with foundation bolt single arm bracket complete in all respect of Bajaj make asper product codeBOP-5030or make in/c MCB. connector and connection from connector to fittings approved by Enginer-in -Charge.

ARUN KUMAR SHARMA

Ratwan Light House