Borewell

Drilling/Deepening of bore wells by down the hole hammer ,(DTH) Drilling/Deepening to finished dia of 163 mm(6 1/2" dia ) in all formations to the depthspecified and reaming the bore to the required dia to suit lowering (insertion )of 175mm internal dia cashing pipe with couplings,lowering, fixing of casigngpipes flushing the bore wells at and average pressure of 7 kg/cm2 (100PSI) conducting yield test, inclusive of transportation from point to point, crew charges,consumables shifting of rig and all other charges etc., in all over the District . The bore wekks should be true &vertical and work should be carried out to the satisfaction of the department and carried out as per IS -2800 part -I&II/1979 and amendments if and any from time to time.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. Public Health Items (Part –IV) SoR 2025-26

Supply and Transportation of star rated ------Single phase ISI submersiblemotor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha/Lubi / Falcon ELEC-5.6.1

(ELEC-1.6.3)Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors.Makes : Finolex / RR Kabel / Havells / Nakoda / KEI / L&T.

ELEC-1.6.1 Supply of 2.5 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes : Finolex / RR Kabel / Havells /Polycab / GM /Million / V-Guard / Gold Medal / Kundancab / HPL / RPG /Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal /Suncab

Manufacture, Supply,& delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.)

ELEC-5.11.1 Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with ISI mark MCB etc., complete.

ELEC-5.13.6 Supply, Transportation and fixing of 150mm dia galvanised bore cover with required nuts and bolts.

ELEC-5.15.6 Supply, Transportation and fixing of 50mm dia, 450mm length, 12mm thicknessand 75mm wide MS Clampset

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width (RBR-FNDN-1)

Supply and Filling with Crusher Stone Dust as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH including cost and conveyance of all materials and labour charges etc., complete for finished items of work.

BLD-CSTN-3-5 (22) Plain Cement concrete (1:4:8) proportion nominal mix (cement : fine aggregate : coarse aggregate) using 40mm sixe HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water erc. all operational, incidental and labour charges such as mixing, laying and ramming finishing top surface, curing concrete, erc.. complete for finished item of work foundations.

Plain Cement Concrete (M10)- Nominal Mix (1:3:6) Prop with 20mm metal hand/machine mixing including cost and conveyance of all materials and labour charges etc., complete for Walls.

RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)

Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Plain ended pipes conforming to B.I.S 458/2003, Ex-factory, Excluding transportation & taxes.

BLD-CSTN-8-9-(84) : Plastering 20mm thick two coats with base coat of 16mm thick in C.M. (1:6) and top coat of 4mm thick in C.M. (1:3) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand , Water, etc., to site, seigniorage charges, all operational, including charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing , including cutting grooves where ever necessary etc., complete for finished item of work of uneven surfaces of walls. (External walls)