Repair and restoration of damaged Saroya distribution system of outlet off taking at RD 2700 m of Saroya Distributory offtaking at Rd 112.526 km right side of kandi canal stage-2

Amount

Excavation by mechanical means (JCB or Hydraulic Excavator) in trenches for pipe line with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade , cutting joint holes, refilling consolidation ,watering including the cost of dewatering of rainwater , diversion for traffic, night signals providing and fixing and caution boards, crossing over trenches for access to houses, watching fencing etc and removal of surplus soil outside/inside the town involving lead upto 15 mtr Complete in all respect. Earthwork upto 1.50 mtr Depth

Filing sand in Alpha valve, air vent valve And Sluice valve chamber including supply and carriage of sand from local choe lead upto 25 km.,including loading and unloading and rehandling if any complete in all respect.

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 110mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 125mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 140mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 160mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 180mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 250mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 280mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 315mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 125mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 140mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160mm

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 110mm 90 degree

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 125mm 90 degree

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 140mm 90 degree

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160mm 90 degree

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge).150mm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge).200mm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge).250mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.110mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.125mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.140mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.160mm

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge125mm

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge140mm

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge160mm

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge180mm

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge250mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 110x110x110mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 125x125x125mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 140x140x140mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 160x160x160mm

Supply & fixing of service saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge 160mmx50mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing ,etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 110mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 125mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 140mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 160mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 180mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 250mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 280mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 315mm

BRICK WORK

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

WATER SUPPLY

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

(81) Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer -in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

((a)) Capacity of Air compressor 300 cfm at 250 PSI

((b)) Capacity of Air compressor 500 cfm at 150 PSI

PLASTERING & POINTING

12.5 mm thick cement plaster 1:2

CONCRETE Cement concrete 1:2:4

(ii)) mixing by mechanical means using concrete mixer volumetric type

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

CENTRING AND SHUTTERING

Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.

any other item

Oasis Farm Solutions