8270 ADDITION/ ALTERATION OF OFFICE SPACE AND PROVISION OF DEFICIENT PLANNING CUM-BRIEFING ROOM, VISITORS ROOM AND KITCHENETTE ON 4TH FLOOR OF BLDG NO P-222 AT ND (MBI)

Materials and labour for bricks work with sub class 'B' bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed.

Ditto- but half brick work in cement mortor (1:4)

M&L for 18-20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x4 mm thick ( non asbestos fiber cement designer/coloured) ceiliing board / tiles deep panel (Make -Armstrong/ Chanakya/ Everest.

S&F counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed Make _ Jaquar/ Hindware/ Cera.

S&F hand dryer all as specified and directed.

S &F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F matt finish stainless steel double bowl with single drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size `730x510mm and bowl size 510 x 405 x 250mm fixed in repair.Cat log No SSDBSD-99 of Silver Shine or equivalent.

S&F PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

S&F plate rack made of stainless steel, 910 x 1220X0.25 mm including fixing as per manufacturers instruction.(SSKPR-318 or equivalent)

S&F fancy type cock suitable for sink with raised J shaped swinging spout (wall mounted model 15 mm dia, screwed for iron pipe and fixed Cat log No CON-357KN of Jaquar or equvalent.

Auto clouse hinges stainless steel for full overlap for cup board shutters etc

S & F for SS Magnetic door catcher for drawer, cupboards etc

S&F Stainless steel locks suitable for cupboards, drawers etc

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S & F Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed.

S&F 150mm sizes brass handle cast type polished bright completed.

S&F 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S & F for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge.

S & F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

_Ditto_ all as per Sl item No. as above here in before but 20 mm bore of pipe

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed. (Water proofing compound to be measured and paid for separately).

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC.

All as per Item above but MS Plate (Plain or Chequred).

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span

S&F for Porbandar or Malad stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed by Engr-in-charge.

M&L for pine wood wall panelling 12 mm thick fixed with grueing/screws to timber frame work. All as specified and directed.

S&F 8 to 12mm thick, toughened froasted glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs (1200 mm long), door lock on both shutters etc fittings for door pivots etc complete all as specified and directed by Engr-in-Charge.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed complete all as specified and as directed

S&F for hego/ pergo 8mm thick wooden flooring including spung/polythene. All as specified and directed.

S&F roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete

S&F for 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour

Removal of debris old concrete spoils etc excd 5 KM but not excd 15 KM complete all as specified and as directed outside MD Land.

Outdoor Unit: Supply, Installation, Testing & Commissioning of Modular type 100% All Inverter Variable Refrigerant Flow Outdoor units comprising of Hermetically sealed INVERTER Variable Speed Scroll compressors. The unit shall comprise of high efficiency, low noise condenser fan with guard and motor, heat exchanger and coated fins for increased durability. The casing shall be powder coated and the unit shall be provided with liquid line strainer, catch all drier, thermostats etc. suitable for interconnecting with any type of indoor units with cordless remote controller. The ODU & IDU shall be integrated with special super wiring system with the central monitoring control. The unit shall be factory wired and tested before despatch. The operating refrigerant shall be R410A only.The unit shall be BMS compatible with MODBUS protocol. Outdoor should give 100% Capacity at 43 Deg C Ambient Temperature. The COP of the Outdoor units should be more than 3.6 at design conditions complete all as specified and as directed. Make:- Bluestar

Indoor Units: Supply, Installation, Testing & Commissioning of VRF based 4 Way Cassette unit with minimum tonnage capacity mentioned below. The unit should be complete with Fan section with Fan/Cooling Coil suitable for R410A With electronic expansion valve, return air filter, insulated drain tray and necessary controls complete all as specified and as directed (with Cordless Remote) Make:- Bluestar

1.5 TR / 490 CFM

2.0 TR / 695 CFM

Note for item No. 1 to 2.2 : The cost of drilling/cutting of stone/brick wall and false ceiling of any kind and making good as per existing while installation of indoor/outdoor units and connected copper and drain water pipes is deemed to be included in the quoted rates.

Remote Control

Supply of Cordless Remote Controller for all IDUs including adaptors, power/ control cabling, accessories etc complete all as specified and as directed.

Supply of Central Remote controller for all IDUs including adaptors, power/control cabling, accessories etc complete all as specified and as directed.

Supply, installation, testing & commissioning of special refrigerant 'Y' joints/Refnets for VRV /VRF system as per standard specifications complete all as specified and as directed.

Supply, installation, testing and commissioning of All refrigerant piping between indoor & outdoor units using eddy current free Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods at a regular interval of 1 metre each, insulation of suction / liquid pipes using 19 mm thick elastomeric closed cell Nitrile Rubber insulation material and covered with Al. foil (Exposed copper Piping Should be Al. Foil & not exposed copper piping without Al.foil) & having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, .Making up of any leakages occuring during testing / commissioning. GI BOX type cable tray 150 mm wide for supporting refrigerant piping in shafts / terrace, complete with supports. (Min 1.2mm Thickness) C- type Cover for cable tray, made out of 16 G GI sheet, to protect refrigerant pipe insulation on terrace. All piping shall be pressure tested for 1.5 times the working pressure complete all as specified and as directed. Make:- MANDEV/RAJCO/MEHTA/MAXFLOW

Supply and topup of Refrigerant R410 complete all as specified and as directed

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with Copper conductor, 1100 volts grade of size 16 sqmm x 4 core laid in ducts, passing through pipes, fixed on walls complete including connecting properly by means of clamps, thimbles complete all as specified and as directed.

Supply and fix and testing and commissioning of communication cable of size 2.5 Sqmm 3 core, non polarity cable with end termination between indoor to outdoor units, communication cabling between the individual controllers to the main central controller with suitable size PVC Conduits incl accessories etc, and taking out old u/s damaged cables complete all as specified and as directed.

Material and labour for fixing of drain pipe for indoor units of VRF with UPVC pipe of size of 25mm to 40mm dia alonwith connected fittings and accessories etc, including 6mm armaflex class "0" insulation complete all as specified and as directed by Engr-in-Charge.

Supply and fix factory made cable tray with C-type cover of upto size 300mm x 50mm and 2.0mm thick painted powder coated pre galvanised hot dipped including suitable clamps for fixing/supporting horizontally/vertically etc complete all as specified directed by Engr-in-Charge.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for one double pole MCB 20A all as specified and directed by EIC. Make : Legrand/ Seimens/GE

M&L for concealed sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing & caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

S&F sheet metal enclosure TPN DB VTPN 4 Way,415V with 250A copper busbar, double door type IP-54 protection suitable for housing MCCB 125Amp 4 pole incl required numbers of suitable size of gland complete etc all as specified and directed by EIC. Make: Siemens/Legrand/GE Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding. Make: Legrand/ Seimens/GE

Supply and fix of MCB 6-32A, 16kA complete all as specified and directed

Supply and fix of MCCB 4P 80 Amp, 25kA complete all as specified and directed.

Supply and fix refrigerator, electric driven (single phase), capacity 330 Litres, Convertible 5-in-1, Digital Inverter, Frost Free Double Door, WiFi Enabled Bespoke AI Refrigerator, with minimum BEE 3 star rated complete all as specified and directed.

M&L for concealed point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessories with cover plate and frame including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular box and cover plate all as specified.Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Benlo c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit/PVC Casing Capping. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

(a) One light point controlled by one 5A switch

(b) One Fan point/Exhaust fan point controlled by one 5A switch

(c) One Bell point control by one 5A bell push switch

(d) One 5A flush type switch socket point on same board

(e) One 5A flush type switch socket point on independent board

M&L for concealed point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 1 x15 Amp switch socket point for independent board complete including required size and numbers moduler box and cover plate all as specified & directed. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, ISI marked, not less than 25mm PVC Conduit with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including required number and size of modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. Note : - PVC Casing Capping will be used where PVC conduit not feasible.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by Engr-in-Charge.

Supply and fixing Modular switch, 6 Amps , One way, one module, ISI marked as specified and directed by EIC. Make: cat part No.Legrand - 677200 /Schnieder-X1001WH/Anchor-WIM5011

Supply and fixing Modular switch, 16 Amps , One way, one module, ISI marked as specified and directed by EIC. Make: cat part No. Legrand -677209 /Schnieder-X1101WH /Anchor -WIM 50112

Supply and fixing modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed by EIC. Make: cat part No. Legrand -677235/Schnieder-X2005WHNS/Anchor -WIM113214

Supply and fixing modular socket, 16A - 2/3 pin combined 2 modules all as specified and directed by EIC. Make: cat part No. Legrand -677230/Schnieder-X2106WH/Anchor -WIM 1252

S & F moduler bell push 6A, 1 module all as specified and directed by EIC.

S&F Ding dong AC 230Volts single pole bell 50 Hz all as specified and directed.

Supply and fixing new generation adore LED 7 W Deep Spot 3 K Spot light with intergal Driver Complete with provides high quality ecomonic energy saving lighting Suitable ar/POP/Gypsum ceiling. Make : Havells/Wipro/C&S/Bajaj

S & F Flexible LED strip/profile light, uses high brightness SMD LED as the light source for indoor application only. It is highly suitable for cove-lighting, decorative lighting of desired colour including drivers etc complete all as directed by Engr-in-Charge. Make- Bajaj /C&S/Wipro/Philips/Havells

Supply and fixing new generation 3 in 1 down light 15/18 Watt LED PDC aluminium housing downlights, high quality ecomonic energy saving light complete all as specified and directed. Bajaj/Wipro/Jaguar/Wipro/Bajaj/C&S

Supply and fixing new generation ultraslim LED panel recessed LED 2X2 Luminaire 36 watt, CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting Suitable for 600 x 600 mm modular/POP/Gypsum ceiling. Make : Jaguar cat No LSVR01S036XC/Wipro/Bajaj/C&S

Supply and fix suspended type decorative LED low bay luminaire three in one colour complete all as specified and directed. Make : Bajaj cat part No. BLSPD LED 24W WH or equivalent of phillips

Supply and fixing of wall fan 400 mm sweep complete all as specified and directed.

Supply and fixing of built in ceiling ventilation exhaust fan, 260 mm frame size, air flow min 100 cum/hr including 4 inch oicota chimney exhaust pipe upto 10 feet with cowl cover, tape and required clamps etc complete all as specified and directed. Make: Usha crisp air premia or equivalent

Supply and fixing of PVC body exhaust fan of size 250 mm including louvers complete all as specified and directed.

M&L for concealed sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit/casing capping of suitable size with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

S&F sheet metal enclosure VTPN 6 Way,415V with 200 A copper busbar, double door type IP-43, IK-09 protection suitable for housing MCCB upto 100 Amp 3 pole incl required numbers of suitable size of gland complete etc all as specified and directed by EIC. Make: Siemens/Legrand /GE Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding. Make: Legrand/ Seimens/GE

S & F MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar, IP 43, IK 09 suitable for flush mounting and surface mounting complete etc all as specified and directed. Make: Legrand / Seimens/GE

S & F MCCB 3P 100 Amps,16KA,thermal magnetic,415volts complete all as specified and directed. Make : Legrand cat No 420015/Seimens/GE

S & F MCB SPN 40 A to 63 Amps,10KA , 'C' curve Make: Legrand/ Seimens/GE

S & F MCB SP 6-32 Amps,10KA, 'C' curve, Make: Legrand/ Seimens/GE

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and directed by Engr-in-Charge.

M&L JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Supply and fixing of LT XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 35 sq mm 3½ core complete all as specified and directed by Engr-in-Charge. Make: Polycab/havells/Finolex.Gloster