Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L1 | Accepted-AOC Lowest one | |
| 2 | L2₹29.9 L+₹3.1 L (11.8%)Rejected-Finance ROOM NO 680 GANESH MURTY NAGAR PART NO 03 CAPT PRAKASH PETHE MARG COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than lower | |
| 3 | L3₹30.6 L+₹3.9 L (14.5%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than lower | |
| 4 | L4₹33.1 L+₹6.4 L (24.0%)Rejected-Finance | L4 | Rejected-Finance Other than lower | |
| 5 | L5₹33.2 L+₹6.4 L (24.1%)Rejected-Finance | L5 | Rejected-Finance Other than lower |
Tender Value
Refer Docs
EMD Value
₹98,800
Closing Date
6 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
REPAIR MAINT OF WATER PIPE LINES PUMP MOTORS AND CLEANING OF UG OH SUMPS AND OTHER ASSOCIATED WORKS IN MD ACCN IN OUTLAYING AREAS UNDER GE (NW) NOFRA
2024_MES_636715_1
8229
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹98,800
Yes
16 Mar 2024
10 Jan 2024
8 Feb 2024
10 Jan 2024
6 Feb 2024
23 Jan 2024
10 Jan 2024 - 17 Jan 2024
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out soft/loose soil for laying of cable /erection of pole/stay pit excavation
Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm
Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point
M&L For PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) for plinth protection of semi under tank and suport to main water supply line all as directed by Engineer-in-Charge.
M&L for construciton of brick masonry valve pit of size 75 x 75 x 75 cm (finished internal dimensions ) and 15 mm thick on internal wall surface finished even and smooth external using extra cement and plaster in cement mortar 1:4 and painted flush externally as posible and 50 mm thick PCC 1:2:4 type B-1 for copping and fixing new angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint and a coats of red oxide paint on steel surface including necessary excavation in any type of soil, earth work in any type of soil and demotition of damaged existing valve pit complete all as specified and directed by Engr-in-Charge
M&L for construciton of brick masonry valve pit of size (105 x 105 x 105cm (finished internal dimensions ) using sub class "B" brick masonry in cement mortar cm 1:4 including plastering internally and painted flush externally as the work proceeds and PCC 1:2:4 type B-1 as in copping with angle iron frame 40 mm x 40 mm x 6 mm with 2 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint and a coats of red oxide paint on steel surface including necessary excavation in any type of soil, earth work in any type of soil to distance n.exc 50 m all as specified and directed by Engr-in-Charge
Repair to broken brick masonry valve pit of size (1.2 x 1.2 x 1.0) mtr and 1.0 m x 1.0m x 0.75 M (finished internal dimensions ) and remove the old plaster and using mortor for plaster in in cement mortar internally and painter flush externally as posible and PCC 1:2:4 type B-1 for copping and providing new MS sheet 4 mm thick cover of suitable size made of angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic enamel paint black and a coats of red oxide paint on steel surface including necessary excavation in any type of soil, earth work in any type of soil all as specified and directed by Engr-in-Charge
M & L for repair and replacement of rusted /broken rubber packing both side of non return valve of CI body 80/ 100/150 mm bore. Opening both side flanged with rubber packing including nuts bolts and wahsers etc complete as directed by Engr-in-Charge
M & L for drain out the water with the help of pumping set/Honda Gen set/by manually from the semi under ground sum of capacity 30 thousand ltrs to 2 lakh ltrs capacity for welding work.
Rough execavation removing disintigrated material/rock/ mud/other solit wasted by diging at Pump house and power house to semi under ground tank for drain out of rain water and depositing 50 mtrs away as directed by Engr-in-Charge
Taking down unserviceable centrifugal pump air release and in repalcement of new PVC air release valve as per sample directed by Engr -in- Charge
Material and labour for rubber gasket joint and flanged pipe 150 mm dia pipe , complete with jointing materials for jointing fittings with pipe all as specified.
Material and labour for rubber gasket joint and flanged pipe 80 mm to 100 mm dia pipe , complete with jointing materials for jointing fittings with pipe all as specified.
Taking out old rusted pipe as per existing site and welding/ cutting work for MS pipe of any dia fixing of pipe as required shape and length for motor and pumps.
M&L for Painting of CI/GI pipe line 40 mm to 150mm inside the pump house and out side each pump house and all sluice valve, NRV gate valve) with one coat of synthetic enamel black/gray paint of existing colour shade with spray gun machine and after cleaning and preparation of surfaces complete all as specified & directed by Engr-in-Charge
Taking down the broken iron coupling from the 35 HP to 75 HP motor / pump and replace with new coupling with cotter pin, rubber piece and nut bolts as per sample.
Repair and replacement of burnt out MCCB of capacity 160 to 400 Amps, connecting patti / cable lugs and strip opening of MCCB from the panel and taking out burnt lugs/ cables and copper lugs fix new MCCB patti nut, bolts and lugs all as directed by Engineer-in-Charge.
Repair and replacement of burnt panel aluminium bus bar of capacity 200 to 400 Amps taking out burnt aluminium bus bar and fixing with new bus bar minimum 05 mtrs with necessary fitting and fixtures , addition, alteration of existing panel complete ass as specified and directed by Engr-in-Charge.
Taking out rusted LT insulation rubber mat and through out the out side of pump house and fixing /lay new electrical LT insulation rubber matting as per ISI of size 1m x 2m x 12 mm thick.
Supply an fixing Nut and bolt of black bolt with hexagonal head and nuts round necks with washer of size 16 mm diameter and 100 mm length
Taking down of leakage /rusted pipe from the existing position and repair to leakage GI pipe line of size 25 mm to 50 mm dia pipe including by threading / welding & the earth work and labour charge and as directed by EIC.
Taking down of leakage /rusted pipe from the existing position and repair to leakage GI pipe line of size 100 mm to 150 mm dia pipe by threading / welding work / labour charges and including the earth work and as directed by EIC.
Taking down of leakage /rusted not grether than of 20 mtrs 100 GI delivery pipe from the existing position pump house and replace with new GI pipe line of size 100 mm by threading / welding work / labour charge and including the earth work and as directed by EIC.
Taking down of leakage /rusted not greater than of 3 mtrs 100 GI suction pipe from the existing position pump house and replace with new GI pipe line of size 100 mm by threading / welding work / bend /, flanged / , nut, bolts /, labour charge and as directed by EIC.
Cleaning and painting external surface with cement based paint complete, colour as existing Semi under ground RCC sump each pump house after draining out scraping out bottom and side of wall with wire brush and bleaching powder, removing scaling fungus, flushing thoroughly with clean water, applying one coat of white washing after drying inside, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 20mm size on external surface of wall with white enamel paint over black paint surface all as directed by Engr-in-Charge
Disconnecting all electric connections from the submersible pump & motor 03 HP & taking out column assembly from bore well and transporting the same to civil workshop for repair . directed by Enge -in-Charge.
M&L for fabricating positioning glow sign board for E/M insallation map plot lay out. Translite glow sign made of PVC sheet box frame with aluminium angle support and four (04 side ) angle iron frame for fixing of board and name of stn/ mob No and other information writing on acrylic sheet 1.2 m x 0.90 x 0.15 m size/coloured glazed lettering on white acrylic sheet back ground using super glow paint and provided with flourescent glow LED light using 1 x 36 watt tube light fitting including internal wiring inside the box, external point wiring from the nearest DB including wall mounting all as directed by Engr-in-Charge .
Taking out burnt / damaged cable from panel to motor not grether than of 15 Mtrs and replacement with new single core copper conductor cable PVC insulated of size 35 sqmm , 1100 volt conforming to IS 694/1990 including UPVC pipe.
Taking out burnt / damaged cable from panel to motor not grether than of 15 Mtrs and replacement with new single core copper conductor cable PVC insulated of size 10 sqmm , 1100 volt conforming to IS 694/1990 including UPVC pipe.
Material and labour for joints with 15 mm thick MS flanges slip type through welded to MS pipes complete with jointing materials such as rubber, gasket, nut bolts and washer etc for 100 mm bore pipe all as specified and directed.
Material and labour for joints with 15 mm thick MS flanges slip type through welded to MS pipes complete with jointing materials such as rubber, gasket, nut bolts and washer etc for 150 mm bore pipe all as specified and directed.
Dismantling and taking down old u/s power contractor of any make and supply and fix 3 pole power contaractor suitable for motor upto 40 HP.
Dismantling and taking down old u/s power contractor of any make and supply and fix 3 pole power contaractor suitable for motor upto 40 to 70 HP
Dismantling and taking down old u/s timer and supply and fix timer suitable for motor upto 40 HP.
Dismantling and taking down old u/s timer and supply and fix timer suitable for motor upto 40 HP to 70 HP.
Dismantling and taking down old u/s relay and supply and fix relay as per existing make and capacity suitable for motor upto 20 HP to 70 HP Make- L & T/ Havells and equivallent as approved by GE.
Taking out old rusted and broken semi under ground sump lid and angle frame and replacement new lid made out MS sheet / cast iron as per existing hole including locking arrangements RCC water tank all as directed by Engr-in-Charge
Taking out old rusted and broken building over head tank lid and angle frame and replacement new lid made out MS sheet / cast iron as per existing hole including locking arrangements RCC water tank 10000 gallons capacity all as directed by Engr-in-Charge
Taking out burnt cable by excavation from main panel to motor panel not grether than of 60 mtrs and supply and replacenent aluminium conductor XLPE cable insulated screened. PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 of size 185 Sqmm 3.5 Core with both side aluminium lugs nut bolts etc and including earth work , returning and filliig.
Disconnecting the electric connection from motor terminal box including insulating the ends of the cable, taking out the unserviceable pump set of any make from pump houses after opening nuts/bolts, transporting from site to workshop, dismantling pump, removing worn out impeller, ball bearing, gasket, and replacene the unserviceable parts , gland packing, greasing, transporting back to pump house and refixing on the existing foundation, connecting the electrilc connection to the motror and testing complete to entire satisfaction of Engineer-in-Charge for the following capacity.
(a) Centrifugal pump set of capacity 40 to /75 Hp
(b) Centrifugal pump set of capacity 5 to 35 Hp
Material and labour for rewinding the electric motor of capacituy 60HP to 75 HP capacity, disconnecting the electtic connection of motor, earth connections, decoupling motor and pump, removing foundation nuts/bolts and removing the motor from its existing position to workshop (Note:- following workds deemed to be included in the quoted rates.) (a) Removing the split case/body cover of motor, seperate stator/rptar and cutting the complete burnt/defective copper winding. (b) Cleaning the stator body complete by rubbing and paper removal all carbons. (c) Insert insulating materials such as insulating paper sleeves. (d) Rewinding the stator with existing size of super enameled copper winding, varnishing and heaating up at desired temperature for achieve the particular Ohm resistance. (e) Clean the rotor and assembling in motor. (f) Connecting/coupling the motor with pump, connect all electric/earth connection foundation nuts.bolts at its original position and testing on load and complete all as specified and directed.
All as per srl item No.41 here in before but motor of capacity 40/55 Hp
All as per srl item No.41 here in before but motor of capacity 20/35 Hp
All as per srl item No.41 here in before but motor of capacity 5/15 Hp
M & L for dismantling the rusted foundation bed of the motor and pump set, and fabrication of the forundation beds with MS channels angle of the required as per pump set capacity( 40 HP to 75 HP) and duly applying one coat of red oxide primer and two coat of bitumen paint of approved quality and re-erection the pump and taking out old PCC approx 1.2 feet depth and 1.5 mtr length, 1 mtr width and fix new RCC material 1 : 2 : 3 ratio and finxing new 06 No nut and bolts 1.2 feet long for loding of motor iron foundation and motor testing to the entire satisfaction of Engineer-in-Charge. Note:- (a) However quoted rate is deemed to be included for welding work, nuts, bolts, washer and MS fasteners including Concrete required for foundation.
M & L for dismantling the rusted foundation bed of the motor and pump set, and fabrication of the forundation beds with MS channels angle of the required as per pump set capacity( 15 HP to 35 HP) and duly applying one coat of red oxide primer and two coat of bitumen paint of approved quality and reerrction the pump and taking out old PCC approx 1.2 feet depth and 1.5 mtr length, 1 mtr width and fix new RCC material 1 : 2 : 3 ratio and finxing new 06 No nut and folts 1.2 feet long for loding of motor iron foundation and motor testing to the entire satisfaction of Engineer-in-Charge. Note:- (a) However quoted rate is deemed to be included for welding work, nuts, bolts, washer and MS fasteners including Concrete required for foundation.
Disconnecting electric supply from motor, removing wornout coupling rubber packing and supply and fix new coupling packing for the follolwing:-
(a) 40 to 55 HP motor
Taking out old unserviceable water meter from the existing position by unscrewing the nut andbolts and replacing with new water meter suitable to fit in 150 mm bore in existing GI/CI pipe complete with flange, gasket, nuts, bolts and all necessary required items all as specified and directed by Engineer-in-Charge.
Taking out old unserviceable water meter from the existing position by unscrewing the nut andbolts and replacing with new water meter suitable to fit in 100 mm bore in existing GI/CI pipe complete with flange, gasket, nuts, bolts and all necessary required items all as specified and directed by Engineer-in-Charge.
Material and labour for scrubbing old paints from outer surface of plants and equipment including painting with two coats of synthetic enameled paint over one coat of red oxide paint and also writig AM/MES Nos on surface of the plant with white paint all as specifed and directed by Engineer- in -Charge. The following pump and motor as under :-
(a) Pump and motor set from 60-75 HP including suction and delivery upto 15 Mtrs
(b). Pump and motor set from 5 -55 HP including suction and delivery upto 15 Mtrs
Supply and fix in replacement of new butterfly valve of PN 1.0 of dia 80mm
Cleaning of PVC/RCC tank in any position by rubbing, washing removing the scales dust etc including plugging the insets dusting washing all as directed for tanks
(a) Capacity above 5000 to 10000 gallons
(b) Capacity up to 3000 to 5000 Ltrs
Repair/Maintenance to Chlorine dozing system assembly with chlorine injector dozing pump, cleaning, servicing, carrying out minor repairs and testing. [Note : (a) Work is including consumables like cotton waste cloth etc. (b) Parts and spares requied to be replaced.]
Supply & fixing in replacement of dosing Pump high pressure single head gear motored adjustable dosing pump with accessories include lead tubing, connecting nuts, injection check valve, clay weight, ferules etc.
Supply and fix in replacement of new butterfly valve of PN 1.0 of dia 100mm.
Supply only Calcium Hypochlorite in granular form having minimum 70% of available chlorine (Ca(OCI)) with anti-corrosive and anti-scaling properties suitable for human consumption. Note: Contractor shall produce letter of authorisation, COA with unique serial number and NSF certiifcate from manufactuer.
Taking out broken PVC lid abd Supply and fixing PVC polyethylene water storage tank lid of any capacity with locking arangement and fixed 01 lock each tank as specified and directed by Engineer-in-Charge.
Strip opening of 100 / 150 mm NRV top cover and taking out of unserviceable and damaged flap cover and change new flap cover and lather sheet including nuts bolts and wahsers etc complete as directed by Engineer-in-Charge.
Taking out unserviceable and broken/ damaged brass gate valve of 40/50 mm gun metal Valve and Supply and fixing in replacement 40 mm of gun metal gate valve with iron wheel head all as directed by Engr-in-Charge
Taking out unserviceable and broken / damaged brass gate valve of 80/100 mm gun metal Valve and Supply and fixing in replacement new brass gate valve with iron wheel head all as directed by Engr-in-Charge
Water testing report of BASIC TEST / HEAVY METAL TEST /PATHOGENS TEST as per list . Collection of empty sterlised bottles from the Govt/ authorised lab Mumbai , Maharashtra after taking out water sample from user end / pump house. Water sample filled bottle depositing to the same lab for anaylsis test and collect the sample report and deposited to E/M sub divn all as directed by Engr-in-Charge Location : Reviera/ INS Shikra/ NT Pool/ Sasson Complex/ Bhagirathi/ Aditi/ Vishakha/NT Pool. On monthly basis.
Repair to unsewrviceable sluice valve of size 80 mm to 150 mm dia. Opening the nut,bolts both side flanged ,after taking down unscrew the top cover and taking out the spendle , gate with chucknut.
Supply and fix in repair Gland plate with nut and bolts of size 100 mm dia.
Supply and fix in repair Gland plate with nut and bolts of size 150 mm dia.
Supply and fix in repair Gland plate with nut and bolts of size 80 mm dia.
Supply and replacement of sluice valve brass spindle of size 100 mm dia.
Supply and replacement of sluice valve brass spindle of size 150 mm dia.
Supply and replacement of sluice valve brass spindle of size 80 mm dia.
Supply and replacement of sluice valve Gate Checknut of size 80 mm dia.
Supply and replacement of sluice valve Gate Checknut of size 150 mm dia.
Supply and replacement of sluice valve Gate Checknut of size 100 mm dia.
Supply and Replacement of Unserviceable/Rusted foot valve with new foot valve, 150 mm size PN-1.6 pressure rating including all joints with rubber or fibre board, bolts, nuts washers, etc. and fix the pipe/ valve in water tank / pump complete all as specified and directed by Engr-in-Charge. [Note:Including Opening of nut and bolt for the pump and taking out pipe]
Supply and Replacement of Unserviceable/Rusted foot valve with new foot valve, 100 mm size PN-1.6 pressure rating including all joints with rubber or fibre board, bolts, nuts washers, etc. and fix the pipe/ valve in water tank / pump complete all as specified and directed by Engr-in-Charge. [Note:Including Opening of nut and bolt for the pump and taking out pipe]
Routine maint of centrifugal pump / NRV / sluice valve/Non return valve by attending fault testing of sustem regularly basis to insure serviceability and checking of system , including replacement of unseriviceable component including preventive maintinance spares by replacing minor parts i.e galand packing nut and bolts . Note :- If the contractor will not attend the complaints by his trades man in any working day , the necessory recovry of Rs. 800/- per day shall be imposed complaint not attended within 24 hrs and checking of non ops pumps /valve /foot valve each location in routine wise per day by trades men.
Taking down old unserviceable pressure gauge with the help of gas cutter/ monkey packed and replacement with new Pressure gauge 100 mm dia with ball valve of pressure 25 Kg/Sqcm directed by Engr-in-Charge. [Note:Including taking out old submersible pump from bore well.]
supply and fixing unserviceable submersible pump with 3 HP submersible pump 3 phase 420 Volt all as per directed by Engr- in-Charge .
Disconnect the electric connections form starter and taking out burnt submersible starter from the existing position. Supply and fixing new water sensor submersible starter 3 phase , 440 Volt , front side openable and locking arrangement all as per directed by Engr- in-Charge .
Taking down 15 mm dia steel tubing and connections from the wall, floor and ground including excavation complete all as specified and directed.
All as per srl item No.78 here in before but of 20 mm dia
All as per srl item No.78 here in before but of 25 mm dia
All as per srl item No.78 here in before but of 40 mm dia
All as per srl item No.78 here in before but of 50 mm dia
All as per srl item No.78 here in before but of 80 mm dia
All as per srl item No.78 here in before but of 100 mm dia
All as per srl item No78 here in before but of 150 mm dia
Supply and laying GI tubing 15 mm dia medium grade with all fitting such as tee, socket, bend, union etc in trenches complete.
All as per srl item No. 86 here in before but of 20 mm dia
All as per srl item No. 86 here in before but of 25 mm dia
All as per srl item No.86 here in before but of 40 mm dia
All as per srl item No.86 here in before but of 50 mm dia
All as per srl item No.86 here in before but of 80 mm dia
Supply & Fix in replacement MS pipes 100mm dia conforming to IS 1239 (Part-I) medium grade with both ends flanged and drilled with standard MS fitting including 02 coats of synthetic enamel painting over one coat of red oxide primer in any length and fixed on walls, complete all as specified and directed in high rise buildings.
All as per srl item No. 92 here in before but of MS pipe 150 mm dia.
Supply and fixing in replacement of old monoblock Booster pumps with motor 7.5 KW / 10 HP for 415V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 415 volts, 3 phase, 50 Hz 70 mtr head, 5.4 LPS / 324 LPM discharg , 2050 RPM.
Supply and fixing of water level indicator one Nos of each semi under ground sump with all accessories i.e Angle iron 12 feet long of size 25 x 25 mm, 4mm thick and two angle fix (welding ) 45 degree angle, steel wire as required gauge, PVC cane/drum , moving roller , welding work etc and one coat of synthetic enamel black paint front / back side and written / marking level gauge with white /red paint with all necessary safety equipment, helmet, ladder, rope, safety belt etc provided by contractor , complete all as specified and directed by Engineer-in-charge.
S&F in replacement of unserviceable with new sluice valve flanged type with brass spindle including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position ISI marked on body conforming to IS-14846 PN-1.6 of size 100 mm dia all as directed by EIC.
S&F in replacement of unserviceable with new sluice valve flanged type with brass spindle including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position ISI marked on body conforming to IS-14846 PN-1.6 of size 80 mm dia all as directed by EIC.
Supply and fix in replacement 40 mm of gun metal globe or gate valves, with iron whel head, screwed both endes for iron pipe.
Supply and fix in replacement 50 mm of gun metal globe or gate valves, with iron whel head, screwed both endes for iron pipe.
Supply and fix in replacement 80 mm of gun metal globe or gate valves, with iron whel head, screwed both endes for iron pipe.
B P ENTERPRISES
SHRI SAI ENTERPRISES
N.S.ENTERPRISES
shubham construction
Unity Enterprises
siddharth and company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .