Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC CHAK HARIHARVAN KHANUPUR JHUNSI PRAYAGRAJ | L1 | Accepted-AOC Lowest Amount Quoted | |
| 2 | L2₹7.2 L+₹15,900 (2.26%)Rejected-Finance | L2 | Rejected-Finance Higher Amount Quoted | |
| 3 | L3₹7.7 L+₹63,450 (9.04%)Rejected-Finance 368 1B HIMMATGANJ PRAYAGRAJ 211016 | PRAYAGRAJ | UTTAR PRADESH | 211016 | L3 | Rejected-Finance Higher Amount Quoted | |
| 4 | L4₹8.8 L+₹1.7 L (24.8%)Rejected-Finance | L4 | Rejected-Finance Higher Amount Quoted |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
15 Nov 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director, HRI
HRI, Chhatnag Road, Jhunsi Prayagraj
Some renovation work to convert 4 rooms of Institute building into class/discussion room at HRI, Prayagraj
2023_HRI_778284_1
HRI/29/2023
Open Tender
Civil Works
Works
60 days
Harish Chandra Research Institute Jhunsi Prayagraj
Please refer Tender documents.
7 documents required · 7 mandatory
₹590
Registrar HRI
₹18,000
6 Apr 2024
27 Oct 2023
16 Nov 2023
27 Oct 2023
15 Nov 2023
27 Oct 2023
Amount
Providing and fixing false ceiling at all height with 12.5 mm thick tapered edge gypsum moisture resistant board including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting.
Providing and fixing in position wall panelling with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels.The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface 12 mm thick
Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc.including priming coat complete Kiln seasoned and chemically treated hollock wood
Supply & fixing Con-123KN jaquar continental Swan Neck Pillar cock pillar top faucet
Providing and fixing first quality white vitreous china, Oval overcounter Wash Basin of Hindware(10045)/ Kohler (K-2075IN) with M.S. or CI brackets, 32mm dia C.P. brass Bottle Trap, CP waste and other ancillary fittings including painting of fitting.
Providing and fixing in position 18mm thick Polished Granite stone in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings over 18 mm thick wooden ply with sutable adhesive, procedure of fixing as recommended by the manufacturer.All joints pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Providing and fixing in position 18mm thick waterproof ply in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings over MS frame work with sutable screw and adhesive. all complete as specified and as directed by the Engineer-in-Charge. Make Green, Century marine 710
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work.
French spirit polishing : Two or more coats on new works including a coat of wood filler
SURYA PRAKASH MISHRA
RAJIV ENTERPRISES
ELITE FURNITURES
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .