SPECIAL REPAIR OF ROAD FROM MANDLA GATE TO RIDGE ROAD AND PROVN OF MISC ROAD FURNITURE AT JABALPUR CANTT UNDER GE (WEST) JABALPUR

Amount

Repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 sqm, putting in premixed bituminous macadam, well rammed and shield with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L for applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified.

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

Preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 1.5 to 2mm thick single coat as in center line and edge line road marking of 150/100mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirment for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacturer's instructions complete all as specified and directed.

Supply and fix, in repairs, cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturer's instructions and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed. (Make: 3M 290 Series of Road Star or equivalent Model of Make- Dark Eye or Green Lite or Sun Lite as approved by GE.)

Supply and fix, in reapir, solar cat's eye/ studs of size 125mmx 125mmx 25mm (shank 60mm) with aluminium alloy shell, high efficiency Mono-Crystalline Solar Panel 2.40V/ 0.30Watt having one Ni-Mh or NI-cd rechargable battery (1.2V/ 1600MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1000 meters of any colour i.e yellow, red, blue, green or white as required at site, working temp 10-75 degree Celcius, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hours from direct sun light, maintenance free, un-breakable poly carbonate clear facing, automatically turns on at night and turns off at dawn including all fixing arrangement as per manufacturer's instructions complete all as specified and directed. Make: DA 110 (DHRUV) of DARK EYE or equivalent Model of make- Road Star or Green Lite or Sun Lite as approved by GE.

Supply & Fix, in repair, 100% water proof metal tubular solar delineator (as per IRC 79-1981) made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) Block of size (150x150x300mm), type B1 using 20mm graded crushed stone aggregate complete all as specified and directed (Make :- 3M or equivalent in, Disha Steel Fab, Pioneer Plastic, Vinay Enterprises as approved by GE)

M&L for moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all AS specified and directed. Notes :- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness including part chipping (below or above ground level) complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness laid dry in floors, aprons etc. complete all as specified and directed

M&L for 100 mm thick PCC(1:4:8), type D-2, using 40 mm graded crushed stone aggregate as in sub base for paver block complete all as specified and directed.

M&L Machine pressed coloured precast concrete rubbber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

Supply and fix, in repairs, Traffic convex mirror of size 900mm dia unbreakable having clear and definite mirror image with upper case collar provided with suitable clamps & nut bolts. The complete set shall be fixed on MS pipe 75mm NB, 2.0 metre long, duly painted with synthatic enamel paint (Red/Yellow/black colour) etc including excavation and PCC in post hole for fixing complete all as specified and directed. (Make : Green Lite/Dark Eye/Sun Lite or equivalent as approved by GE)

S & F, in repair, Road Sign boards frame made of stainless steel pipe 50 mm dia and 3 mm thick plain aluminium sheet including writing of letters and logo in retro reflective tape of appropriate size and PCC 1:2:4 Type B-1 as in foundation for embedding of boards complete ( height of sign board above average GL should be 2.80 metre and width 1.20 metre ) including taking down of Old unserviceable MS board of any description complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like including necessary form work complete all as specified and directed.

Taking down eaves gutter,rain water pipes ,AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

M & L for 50 mm thick Sand filling below the interlocking paver block including watering and consolidation complete all as specified and as directed

M&L Traffic convex mirror of size 1000mm dia unbreakable having clear and definite mirror image with upper case collar provided with suitable clamps & nut bolts. The complete set shall be fixed on MS pipe 65mm NB 2.0 meter long duly powder coated/painted white/blue colour etc including excavation and PCC in post hole for fixing complete all as specified and directed. (Make : Green Lite/Dark Eye/Sun Lite or equivalent as approved by GE)

S & F 100% water proof solar delineator (as per IRC 79-1981) Metal rectangular delineator made out of 100mm X 25 mm cross section MS pipe, 1.6 mm thick of length 900mm from GL (total length =1100mm) duly stove enameled painted with three prismatic grade retro reflective sheet bands of red/white colour. Total height of bands shall not be less than 150 mm. The reflective bands shall be protected with a cage of MS welded zinc plated 12 gauge wire mesh including excavation and PCC for fixing in PCC complete all as specified and directed. (Make :- 3M or equivalent in, Disha Steel Fab, Pioneer Plastic, Vinay Enterprises as approved by GE)

Schedule of credit amount of Rs 46,695.00 to be deducted during AOC

M/s PARASRAM MULCHANDANI

Mahaveer Engineering Co.

DEEPAK CONSTRUCTION

Sachdeva Enterprises

LAL SINGH & SONS

Goodluck Enterprises