REPAIRS TO BATH WC FALSE CEILING PAINTING TO INTERNAL AND EXTERNAL AND CERTAIN BLDGS OF MH WELLINGTON UNDER GE WELLINGTON

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified Ceramic Tile 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified Ceramic Tiles 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm as in skirting/ dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface all as specified and as directed.

Granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Granite 20mm thick machine cut, in skirting / dado over and including 10mm thick rendering in cement mortar 1:4 on stone / brick masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Takingup or down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed

Takingup or down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete of size 15 mm dia all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete of size 20 mm dia all as specified and directed

Vitreous china squatting pan Orrissa pattern size 580mmx 440mm white with integral foot rest with 'p' or 's'trap including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified and directed

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap including flushing pipe, seat and PVC seat cover (white) closed pattern with flat bottom and cover brass chromium plated hinging device, including connection to drain and to flushing pipe, antisyhonage pipe etc complete including fixed in repairs all as specified and directed.

Floor Mounted Coupled Water Closet of size 380x660x 765 mm with flushing cistern, with UV Soft Close Seat Cover , Hinges, Fixing Accessories Set including S Trap complete and fixed in repairs all as specified and directed. Make: Cat No.LYS-WHT-38751S & LYS -WHT-38201 of Jaquar or Equivalent.

PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets including fixed in repairs complete all as specified and directed.

Vitreous china Counter Wash Hand Basin with fixing accessories, any shape size not less than 480x370x200 mm including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore Pillar Tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed completeincluding fixed in repairs all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed complete all as specified.

Vitreous china wash basin Table Top white, size 420 x 420x 135mm including brackets including cutting for and pinning in ends of brackets or erecting stand and waste pipe etc,complete and fixed in repairs all as specified and as directed.

Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including flush pipe, grating and Union for discharge pipe complete all as specified and directed.

Cast copper alloys Chromium plated fancy type Urinal spreader with Auto closing system Push cock ( Urinal Valve) with chromium plated hose pipe fixed suitable for 15mm dia pipe for urinals all as specified and directed.

Vitreous china urinal partition white of size 310x700 mm and fixed in repairs all as specified and as directed.

Pillar taps, 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

Single Lever Basin mixer without pop up waste system & 450 mm long braided hoses complete and fixed in repairs all as specified and as directed. Make :- Cat No. KUP - 35011BPM of Jaquar

Brass CP Wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe 15mm dia bore complete and fixed in repairs all as specified and as directed. Make : Cat No. CON- 273KNUPR of Jaquar

Bib tap fancy type long body chromium plated with letters hot & cold fixed 15mm dia complete including removing existing tap and fixed in repairs all as specified and directed

Chroumium plated fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed. Make : KUP-35041 PM of JAQUAR

Angular Stop valves 15mm dia bore, cast copper alloy screwed down high pressure fancy type, chromium plated screwed both ends for iron pipe or unions fixed in repairs complete all as specified and directed.

Stop valves, fancy type, 15mm dia bore chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long complete and fixed in repair all as specified and as directed.

Hand shower 120 mm dia round shape multi flow with cascade effects rubit cleaning system complete and fixed in repair all as specified and as directed. Make: Cat No.HSH-1731 of JAQUAR

Hand shower flexible tubes 12 mm dia & 1.5 m long with nuts complete and fixed in repair all as specified and as directed. Make: Cat No.SHA-549D12 of JAQUAR

Premium wall bracket for hand shower 35 mm dia and 100 mm long round shape complete and fixed in repair all as specified and as directed. Make: Cat No.SHA-555 of JAQUAR

Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer and fixed in repair all as specified and as directed MAKE:Cat No.ALD-577 of JAQUAR

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and fixed in repairs all as specified and directed.

Supply, fixed in repairs Soap dish complete all as specified and as directed. Make:Cat No.ACN-1131N of JAQUAR

Towel ring square/ rectangular with round flange complete and fixed in repairs all as specified and directed. Make: Cat No.ACN-1121N or ACN-1121BN of JAQUAR

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including fixed in repairs all as specified and directed.

Towel rack 600mm long with lower hangers as in bathrooms complete fixed in repairs all as specified and directed. Make Cat No. CAN 1181N of Jaquar

CP toilet paper roll holder complete fixed in repairs all as specified and directed. Make Cat No. CAN 1155N of Jaquar

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Gratings 125mm dia with waste hole, fixed in repairs all as specified and as directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100mmx62mmx50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Stainless steel butt hinges medium weight 100 mm long complete all as specified.

150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Aluminium handles, cast type anodised, extruded section 150 mm long all as specified and directed.

Taking down PVC/ CI pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) all as specified and as directed

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece double, (double Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe with oval access door complete all as specified and directed

PVC (SWR) junction double, (Double T) equal or unequal of 110 mm bore of pipe with access door complete all as specified and directed

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets including frame work all as specified and directed.

GI frame work for grid of size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

12 mm thick Gypsum Board in ceiling fixed with screws as per manufacturers instructions all as specified and as directed.

Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over one coat in two layers of putty including preparation of surfaces complete all as specified and as directed.

PVC insulation pannels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of aluminium / G.I / M/S as per specification and drawing all as specified and as directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed

Rendering 15 mm thick over concrete surfaces/stone wall/ brick wall/ over chajjas in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed

Rendering 10mm thick cement mortar 1:6 on fair faces of brick work or concrete surfaces all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 on brick/ concrete surfaces, finished even and smooth with out using extra cement all as specified and directed.

Stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6, complete all as specified and directed.

Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depressin on face from straight edge held against the dressed surface n exc 40 mm, complete all as specified and directed.

keyed pointing to random or polygonal rubble uncoursed or brought upto courses in cement mortar (1:4) complete all as specified and directed.

UPVC SWR pipe single socketed in any length with rubber ring joint 100mm dia as in weep holes all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.

PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work complete all as specified and directed.

Plain cement concrete in surface channels and drains of type B2, 1:2:4 using 40mm graded stone aggregate complete all as specified and directed.

Forming fair finished drain or channel of 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. Note: Inner girth only measured.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base and finished even and fair complete all as specified and directed.

Chequered cement concrete colour tiles 30 cm x 30 cm x 20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

75mm thick plain Cement concrete type C-1 , 1:3:6, using 20 mm graded stone aggregate as in plinth protection and hard standing finished even and fair complete all as specified and directed.

Preparation of new walls surfaces and applying two coats of Oil Bound Distemper over one coat of primer over and including a coat of putty 2-3 mm thick (In two layers) including sanding and preparation as per Manufacturers Instructions and all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted over a coat of primer over and including one coat in two layers of external wall care putty 2-3 mm thick in two layers as approved by GE complete all as specified and as directed

Preparation of old wall surfaces and applying two coats of ACE Apex ultima Paint (Anti Fungal) or equivalent in Shalimar paints/ Berger Paints as approved by GE complete all as specified and as directed.

Preparation of old treated of wall surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.

Preparation of old treated of ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying One coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of walls including washing rubbing down and stopping of distempered and painted surface and applying One coat of distemper Oil emulsion washable on old surfaces on walls including filling and making surface smooth of chipped off surfaces as required complete all as specified and directed.

complete removal of existing treatment of wall surfaces and applying two coats of Plastic Emulsion Paint over primer, over one coat of wall care putty 2- 3 mm thick in two layers including sanding and preparation of surfaces complete all as specified and directed

Preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces and steel based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

French polish of any description width and grith including cleaning and preparing the surfaces inluding a coat of wood filler on new surfaces works with two or more coats etc all as specified and directed.

P K ENTERPRISES