PROVN OF TEMPORARY PARKING SHED AT DGQA HARDSTANDING IN FRONT OF T49 17 X SPLIT AC FOR 141 AD REGT INCLUDING OTHER MINER/RENEWAL WORK UNDER AGE BRII AT GE NORTH DELHI CANTT10

Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 450 W (Gde E-250 quality A)

M&L for Cement concrete 1:3:6 type C2 using 40mm aggragate in foundations, filling and mass-concrete

Supply only Chain link MS galvanised fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

M&L applying two coats of syntheic enamel paint over a coat of red oxide on steel surfaces of any description over 10 cm width or girth including preparation of new surfaces complete all as specified.

S&F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged, and jagged or lewised, n exc 15cm long

Supply only Mild steel in flat, round or square bars, in available lengths Fe 450 W (Gde E-250 quality A)

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, upto G+5 storey bldg complete all as specified.

M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.Inc. two coat of white wash lime

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410 W ( Gde 250 quality A) incl demolition of existing items all as specified and directed.

Supply and fix pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap including dismantling the existing sheets complete all as specified and directed.

Rough execavation n. exc 1.5 m deep and getting out in soft/ loose soil.

M&L for Cement concrete 1:3:6 type B-2 (using 40mm aggragate ) Sub base 75 mm thick

M&L for Machine pressed precast concrete Rubber moulded interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade over 50 mm thick sand cushion incl 50 mm thick cement concrete type B-1 ,1:2:4 (20 mm graded stone aggregate with pigment all as specified.

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

M&L Cement concrete (l:4:8) type D2 using 40mm graded aggregate in foundations.

M&L Reinforced cement concrete (design mix) in M-25 grade with 20 mm graded aggregate as in foundation including rafters footings foundation beam plinth beam bases for column etc basment slab under reamed piles and mass concrete

S&F Form work to Rough finished surfaces of Flat concrete, sides of foundations, footing bases of sides and soffits if any of foundation and plinth beams and similar work vertical or to better.

S&F Form work to sides of pillars piers posts and struts piers columns and stanchions.

S&F TMT bars above 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip.

S&F TMT bars 5 mm dia and over up to and including 10mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip for striups.

M&L Rendering 15 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.

M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.

Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed by Engr-in-Charge

Removing excavated soil/ materials to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as directed by Engr-in-Charge

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone ®

M&L 50mm thick Sand Cushioning for paver block tiles over subbase all as spd and directed

S&F Machine pressed precast rubber moulded concrete interlocking paver block of 60 mm approved pattern shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Gradeall as directed at site.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified

S&F LED street/security light fittings 60 watt, made up of of pressure die cast aluminium housing with toughned glass and individual high power LEDs with secondary optics, IP 66 protection, clamp type suitable for 32-50mm dia bracket pipe, to be mounted on existing/ new GI bracket and connecting the street light fitting using 1.5 Sqmm PVC insulated copper cable complete all as directed. Note:- New GI bracket with clamp shall be measured & paid seperately.

S&F bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers,welding if requird including all necessary fittings require for connection and painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete

S&F PVC insulated and sheathed flexible cable 3 core Multi-stranded copper conductor size 2.5 Sqmm 1100 volt grade after taking out old unserviceable one including electric connection complete all as specified and directed

Supply and installation of Split type AC 1.5 TR capacity, hi wall split units indoor & out door unit complete with cordless remote control with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating, inverter technology, energy efficient rating,copper condensor coil, wall mounting brackets (Indoor and Outdoor), Refrigerant 32/34a type (ecofriendly), incl necessary all connections of indoor and outdoor unit complete all as specified and directed.

S&F in repairs sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP capacity in the loadline DB complete with connection testing and commissioning all as specified and as directed

M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete

S&F in repair MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, 4 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete all as specified and as directed.

All as per the descritpin of srl item No 38 above but 8 way complete all as specified and as directed

S&F in repairs for MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and as dierected.