Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹6,500
Closing Date
20 Jul 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
EE PRED Madhugiri
Construction of Toilet Building at LPS Karadipura in Madhugiri Town (Reserved for SC Category)
RDPR/2024-25/BD/WORK_INDENT6751
RDPR/2024-25/BD/WORK_INDENT6751
Reserved
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Madhugiri
5 documents required · 5 mandatory
₹500
₹6,500
11 Jul 2024
11 Jul 2024
20 Jul 2024
Construction of Toilet at LPS Karadipura in Madhugiri Taluk (Reserved for SC)
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and t...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (P.No. 9 I.No. 5.3 Building SR 2023-24 Volume -2 )
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Appendix I Additionalities for Formwork, Centering - 1.Plinth Beams of building a) Isolated - 50%
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Appendix I Additionalities for Formwork, Centering - 15 RCC Roof Slabs - 50%
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 15 mm cement plaster on the rough side of single or half brickwall of mix :1:6 (1 cement: 6 fine sand) including rounding off cornerswherever required smooth rendering, providing and removin...
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mmthickness, including hinges, jamb, lock jamb, bead and if required anglet...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screw...
Providing and fixing white vitreous china water closet squatting pan(Indian type)Long pattern W.C. pan of size 580 mm :(P.No. 133 I.No14.13.1 Building SR 2023-24 Volume -2 )
White Vitreous China Flat back wash basin size 550x 400 mmwith single 15 mm C.P. brass pillar tap (P.No.132 I.No.14.7.4 Building SR 2023-24 Volume -2 )
Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizesrespectively.(P.No.135 I.No.14.23 . 1Building SR 2023-24 Vol...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Supplying P-2 Class R.C.C spun pipes ( safe for 4 kg / cm2 test pressure) to work spot including cost of all materials, machinery, labour, taxes, duties, levies, royalty & all necessary works as appli...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments(Common SR-2023-24 Vol-5 Page No.117Item N...
Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendmentss(Common SR-2021-22 Vol-5 Page No.118Item No...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
tender notification 03.pdf
Tender Document • 1.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .