Erection of RCC/PCC poles and electrical wiring for lighting purpose of Guard Room Check Post and Slurry Pond No. 5 near Jhirkey Basti under Kathara Washery

Amount

Erection of RCC / PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc. as required. Above 8.0m meter and upto 11.0 meter

Supplying and erection of galvanized ‘D’ iron clamps complete with shackles insulator (100MM X 110MM), G.I bolts and nuts, washers coach screws etc as required

Supplying and erection of 100mm X 80mm pin insulator complete with G.I. spindle and nuts etc as required

Supplying and erection of stay set complete (galvanized) with 19/20 mm dia X 1.8M long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required

Supplying of channel iron 75MM X 40MM X 6MM (7.14 Kg Per Mtrs) cross arm for 2 wire overhead line complete with clamps, bolts, nuts and washer etc. including drilling of holes for insulator pins etc. (as per drawing) and painting with primer and finished paint as required

Erection of angle iron / channel iron cross arm on Wood / RCC / PCC / Steel Tubular / Rail Pole etc as required

Erection of all aluminium / ACSR conductor of 7/2.11mm to 7/3.00 diameter and above including binding etc as required. = 4 SPN x 35 mtrs. x 2 wire = 280 Mtrs X 0.214 Kg / Mtrs. = 59.92 Kg. + 2% sagging + 2% binding & jumphering = 62.31 Kg

Supplying and fixing of 32mm dia x 2.00 meter long G.I pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

Providing of RCC / PCC Pole 8mtr long.

Providing of 1.1 KV, 2 core, 2.5sq.mm copper unarmored cable

Transporting charge

Labour charge

B) Wiring for light point /fan point/exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduct, with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5Sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required. 5/6 Amps switch

3 pin 5/6 amps socket out let

15/16 amps switch

6 pin 15/16 amps socket out let

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing followings way, single pole neutral, sheet steel, MCB distribution board, 240 volts, on surface / recess, completed with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required

Supplying and fixing 5 Amps to 32 Amps rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inclusive for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC consult as required

Total impact of GST for the purpose of CTC

M/S VISHAL ENTERPRISES

M/S PUMPY N RAJ ENTERPRISES