Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.7 L
EMD Value
₹17,330
Closing Date
24 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LCA Tejas Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED LCA Tejas Division, Bangalore
Improvement Civil Works to IT department of LCA Tejas Division Plant-I, HAL BC.
9882
HAL/LCA-Tejas/PM/C-12/2024
Works
Bangalore Complex-LCA-PG
₹0
₹17,330
24 Oct 2024
3 Oct 2024
3 Oct 2024
24 Oct 2024
Name of the individual/ Firm/ Company: *Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration
Address for Correspondence
PAN No.:
Service Tax Registration No.
Goods and service Tax ID No.
Contact Details
Registered Contractor
Related Document to be uploaded to HAL e Portal.
I.T Returns for past 03 Years (Assessment Years)
Related Document to be uploaded to HAL e Portal.
Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]
TURNOVER IN Rs.
Audited Report duly certified by the Auditor to be enclosed to support the Turnover.
ESI & PF Nos. with proof
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be uploaded to HAL e Portal( Cancelled cheque leaf to uploaded).
Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .
Related Document to be uploaded to HAL e Portal.
Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.
Type of work: [Incase of private works the same shall be supported with TDS certifcate]
Please Enter Details for Work No I.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No II.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No III.
Details of person holding the Power of Attorney ( if different from the contact person)
Related Document to be uploaded to HAL e Portal.
Documents Need to Uploaded
Related Document to be uploaded to HAL e Portal.
DECLARATION I
DECLARATION II
Related Document to be uploaded to HAL e Portal.
DESCRIPTION
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand).
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing aluminium hanging floor door stopper (Single rubber stopper), ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.
Providing and fixing bright finished 100mm mortice lock with 6levers without pair of handles of approved quality for aluminium door with necessary screws etc complete as per directions of Engineer-in-Charge (EIC).
Supplying, fabricating and fixing Structural steel work riveted, bolted or welded in built up sections using IS sections, bolts, plates, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of synthetic enamel paint all complete including required scaffoldings, as directed by EIC.
Providing, applying and laying cement mortar (1:4) plastering 15 mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.
Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(Size of Tile 600x600 mm).
Painting old plastered interior surfaces like walls and ceiling with two coats of low VOC less than 50grams / litre, premium plastic emulsion with acrylic base conforming to IS 15489, of approved make, colour, shade, tint & pattern at all levels, over a coat of approved alkali resistant primer including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even with white cement putty or Plaster of Paris, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge.
Supplying and Painting with synthetic enamel paint of approved brand and manufacture of required colour on old wooden surfaces to give an even shade including preperation of surfaces and filling the crevises, etc., all complete as directed by the Engineer-in-Charge.
Dismantling false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.
Suppying and fixing Calcium Silicate tegular edged celling tiles only of size 595x595 mm and 15 mm thick on edges on exisitng False ceiling of height varying from 3 - 5 m all complete as directed by the Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge (In cement mortar).
Dismanteling aluminium/Gypsum/wooden, partitions,Work stations, Work-Cubicals, doors, windows, fixed glazing and refixing wherever required, including disposal of unserviceable material and stacking of serviceable matyerial with in 50meters lead as directed by Engineer-in-Charge.
Providing, fabricating and fixing 35mm thick flush door shutters for main entrance conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25 mm minimum depth on all edges and well matched commercial teak 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates,suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating and fixing powder coated aluminium (Min. thickness of powder coating 50 microns) work for partitions and ventilators, with extruded built up standard tubular sections / appropriate Z or other sections of approved make conforming to designation 63400 of IS 1285 and IS 733 including fasteners, EPDM rubber / neoprene gasket, snap beading for glazing / panelling, clips, cleat angle, C.P. brass / stainless steel screws etc., all complete as directed by the Engineer-in-Charge. Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid.
Supplying, fabricating and fixing powder coated aluminium (Min. thickness of powder coating 50 microns) work for windows with extruded built up standard tubular sections / appropriate Z or other sections of approved make conforming to designation 63400 of IS 1285 and IS 733 including fasteners, EPDM rubber / neoprene gasket, snap beading for glazing / panelling, clips, cleat angle, C.P. brass / stainless steel screws etc., all complete as directed by the Engineer-in-ChargeNote: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid.
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid separately.
Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm), in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge.
Supplying and fixing SS Wire mesh of average width of aperture 1.4mm(Approx) and nominal dia of wire 0.63mm(Approx) in aluminium windows neatly all complete as directed by Engineer-in-Charge.
Supplying and fixing of frosted film with minimum 80 micron thickness of self-adhesive type on glass panes as per manufacturer instructions as directed by Engineer in-Charge.
Total (Exclusive of GST)
Percentage above or below for total value on Sl.No. 21
Total amount after Percentage Sl.No. 21 + Sl.No. 22
GST @ 18% for total value on Sl.No. 23
Total amount (Inclusive of GST) Sl.No. 23 + Sl.No. 24
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
12_NIT_CIVIL_WORKS_TO_IT.pdf
TENDER_DOCUMENT • 0.06 MB
12_PQ_CIVIL_WORKS_TO_IT_BID.xlsm
TENDER_DOCUMENT • 0.01 MB
12_PB_CIVIL_WORKS_TO_IT_BID.xlsm
TENDER_DOCUMENT • 0.10 MB
12_TD_CIVIL_WORKS_TO_IT.pdf
TENDER_DOCUMENT • 1.69 MB
12_PQ_CIVIL_WORKS_TO_IT.pdf
TENDER_DOCUMENT • 0.01 MB
12_PB_CIVIL_WORKS_TO_IT.pdf
TENDER_DOCUMENT • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .