Implementation of System Strengthening Scheme under SI(Distribution) category in Valley Districts of Manipur

Supply

New 11 KV line using ACSR Rabbit (33.0 Km)

9.0 m Steel Tubular Pole (410:SP-31) - (embossing as per design drawing of MSPDCL)

Galvanised Pole top bracket

Galvanised Clamp for Pole top Bracket

Galvanised Cross arm(75X40)mm

Galvanised Back clamp for X-arm

Galvanised 2x2.2m D.P. channel X-arm (75X40)mm

11 KV Disc. Composite/Polymer Insulator (Complete set i/c Tension clamps,Hardware)

11 KV Pin Composite/Polymer Insulator (Complete with Pin )

ACSR Conductor (Rabbit)

11 KV AB Switch/G.O. Switch with Galvanised X-arm etc.

Stay Set complete with stay wire, base plate, stay rod etc.

Galvanised Stay Clamp

Galvanised Bracing for D.P.structure, 50X50X6mm M.S. Angle

Galvanised Clamp for D.P. Bracing

Galvanised Anti climbing device complete

Earthing set complete with G.I. wire

Guarding at crossing with G.I. wire

Nuts, Bolts, MS flat as support for item No. 3 jointing sleeves etc.

Al. Binding wire, UPG clamps etc. @10 kg/km

Sundries like pole painting, Danger plate, Number plate etc.

Installation of Distribution Transformer

Installation of New Distribution Transformer of 63 KVA (36 Nos.)

9.0 m Steel Tubular Pole (410:SP-31) - (embossing as per design drawing of MSPDCL)

Galvanised Channel 100X50,@ 7.9 Kg/m 2.8X2 for supporting Transformer

Galvanised Clamp for transformer base channel for M.S. flat [email protected]/m 0.27mX2.

Galvanised Channel 100X50,@7.9 Kg/m 2.8X2 for D.P. X-arm

Galvanised Channel 100X50,@7.9 Kg/m 0.46X2 for supporting of item 2

Galvanised Channel 75X40,@5.7Kg/m 2X2.8m for HG fuse unit & A.B. switch

Galvanised Clamp for A.B. switch/HG Fuse/DO Fuse, 50X8mm @ 3.1Kg/m 0.23mX2=0.46m.

Galvanised Channel 75X40,@5.7Kg/m 2X0.5m for supporting H.G. fuse main channel X-arm

Galvanised Angle (50X50X6)mm 2.8X2 @ 4.5 Kg/m transformer belting and Angle (35X35X5),0.46X2 @ 2.6 Kg/m. Transformer belting support.

Galvanised Clamp for transformer belting

Distribution transformer 63 KVA as per IS:1180(2014) level-II

A.B.Switch (set of 3)

Horn gap fuse unit/D.O. fuse, 3 -Ph (set of 3)

DTR Cubicle for DTRs (Comprising of requisite and adequate ratings of MCCBs/MCBs for LT protection in incomer and outgoing along with accessories required.

1.1KV grade, 3½ core 120 Sq.mm PVC insulated aluminium power cable

D.B.box Galvanised cross arm of M.S. Angle 35X35X5mm @ 2.6Kg/m 2.8X2 = 5.6m

Galvanised Clamp for DB Box Cross arm

Sub-Station Earthing (set of 3 Earthing Pipe)

3 phase Tri-vector Energy meter comprising of IS 14697-1999 with Kiosk

Danger board

11 KV lightening arrestor

11 KV Disc. Composite/Polymer Insulator (Complete set i/c Tension clamps,Hardware)

Bolts,Nuts,clamps etc.

Sundries, Pole painting etc.

Installation of New Distribution Transformer of 100 KVA (48 Nos)

9.0 m Steel Tubular Pole (410:SP-31) - (embossing as per design drawing of MSPDCL)

Galvanised Channel 100X50,@ 7.9 Kg/m 2.8X2 for supporting Transformer

Galvanised Clamp for transformer base channel for M.S. flat [email protected]/m 0.27mX2.

Galvanised Channel 100X50,@7.9 Kg/m 2.8X2 for D.P. X-arm

Galvanised Channel 100X50,@7.9 Kg/m 0.46X2 for supporting of item 2

Galvanised Channel 75X40,@5.7Kg/m 2X2.8m for HG fuse unit & A.B. switch

Galvanised Clamp for A.B. switch/HG Fuse/DO Fuse, 50X8mm @ 3.1Kg/m 0.23mX2=0.46m.

Galvanised Channel 75X40,@5.7Kg/m 2X0.5m for supporting H.G. fuse main channel X-arm

Galvanised Angle (50X50X6)mm 2.8X2 @ 4.5 Kg/m transformer belting and Angle (35X35X5),0.46X2 @ 2.6 Kg/m. Transformer belting support.

Galvanised Clamp for transformer belting

Distribution transformer 100 KVA as per IS:1180(2014) level-II

A.B.Switch (set of 3)

Horn gap fuse unit/D.O. fuse, 3 -Ph (set of 3)

DTR Cubicle for DTRs (Comprising of requisite and adequate ratings of MCCBs/MCBs for LT protection in incomer and outgoing along with accessories required.

1.1KV grade, 3½ core 120 Sq.mm PVC insulated aluminium power cable

D.B.box Galvanised cross arm of M.S. Angle 35X35X5mm @ 2.6Kg/m 2.8X2 = 5.6m

Galvanised Clamp for DB Box Cross arm

Sub-Station Earthing (set of 3 Earthing Pipe)

3 phase Tri-vector Energy meter comprising of IS 14697-1999 with Kiosk

Danger board

11 KV lightening arrestor

11 KV Disc. Composite/Polymer Insulator (Complete set i/c Tension clamps,Hardware)

Bolts,Nuts,clamps etc.

Sundries, Pole painting etc.

Installation of New Distribution Transformer of 250 KVA (34 Nos)

9.0 m Steel Tubular Pole (410:SP-31) - (embossing as per design drawing of MSPDCL)

Galvanised Channel 100X50,@ 7.9 Kg/m 2.8X2 for supporting Transformer

Galvanised Clamp for transformer base channel for M.S. flat [email protected]/m 0.27mX2.

Galvanised Channel 100X50,@7.9 Kg/m 2.8X2 for D.P. X-arm

Galvanised Channel 100X50,@7.9 Kg/m 0.46X2 for supporting of item 2

Galvanised Channel 75X40,@5.7Kg/m 2X2.8m for HG fuse unit & A.B. switch

Galvanised Clamp for A.B. switch/HG Fuse/DO Fuse, 50X8mm @ 3.1Kg/m 0.23mX2=0.46m.

Galvanised Channel 75X40,@5.7Kg/m 2X0.5m for supporting H.G. fuse main channel X-arm

Galvanised Angle (50X50X6)mm 2.8X2 @ 4.5 Kg/m transformer belting and Angle (35X35X5),0.46X2 @ 2.6 Kg/m. Transformer belting support.

Galvanised Clamp for transformer belting

Distribution transformer 250 KVA as per IS:1180(2014) level-II

A.B.Switch (set of 3)

Horn gap fuse unit/D.O. fuse, 3 -Ph (set of 3)

DTR Cubicle for DTRs (Comprising of requisite and adequate ratings of MCCBs/MCBs for LT protection in incomer and outgoing along with accessories required.

1.1KV grade, 3½ core 120 Sq.mm PVC insulated aluminium power cable

D.B.box Galvanised cross arm of M.S. Angle 35X35X5mm @ 2.6Kg/m 2.8X2 = 5.6m

Galvanised Clamp for DB Box Cross arm

Sub-Station Earthing (set of 3 Earthing Pipe)

3 phase Tri-vector Energy meter comprising of IS 14697-1999 with Kiosk

Danger board

11 KV lightening arrestor

11 KV Disc. Composite/Polymer Insulator (Complete set i/c Tension clamps,Hardware)

Bolts,Nuts,clamps etc.

Sundries, Pole painting etc.

Arial Bunched Cable

New LT Line Using 1 phase 2 wire with AB Cable (1X35+1X25)Sq.mm (5.0 KM.)

8.0 m S.T.P.(410:SP-14) (embossing as per drawing of MSPDCL)

M.S. cross arm (75X40) mm, 500 mm long

Back clamp for cross arm

Dead end fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

Suspension fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

AB Cable (1x35+1x25)Sq.mm with insulated messenger/Neutral

Insulation piercing connector suitable for AB Cable (50/35 Sq.mm. Main & Branch) as per TS & Construction Standard {Main 16-95 Sq. mm Service: 4-35(50) Sq. mm & Neutral 16-95 Sq. mm Service: 2-15 Sg. Mm)}

Earthing set complete with G.I. wire.

G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.)

Stay set complete with stay wire and insulator clamp etc.

Bolts & Nuts with washer.

Sundaries,Pole painting, Danger plate, Number Plate etc.

New LT Line Using 3 phase 4 wire with AB Cable (3X50+1X35)Sq.mm (110 KM.)

8.0 m S.T.P.(410:SP-14) (embossing as per drawing of MSPDCL)

M.S. cross arm (75X40) mm, 500 mm long

Back clamp for cross arm

Dead end fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

Suspension fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

AB Cable (3x50+1x35)Sq.mm with insulated messenger/Neutral

Insulation piercing connector suitable for AB Cable (50/35 Sq.mm. Main & Branch) as per TS & Construction Standard {Main 16-95 Sq. mm Service: 4-35(50) Sq. mm & Neutral 16-95 Sq. mm Service: 2-15 Sg. Mm)}

Earthing set complete with G.I. wire.

G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.)

Stay set complete with stay wire and insulator clamp etc.

Bolts & Nuts with washer.

Sundaries,Pole painting, Danger plate, Number Plate etc.

New LT Line Using 3 phase 4 wire with AB Cable (3X70+1X50)Sq.mm (174.0 KM.)

8.0 m S.T.P.(410:SP-14) (embossing as per drawing of MSPDCL)

M.S. cross arm (75X40) mm, 510 mm long

Back clamp for cross arm

Dead end fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

Suspension fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

AB Cable (3x70+1x50)Sq.mm with insulated messenger/Neutral

Insulation piercing connector suitable for AB Cable (70/50 Sq.mm. Main & Branch) as per TS & Construction Standard {Main 16-95 Sq. mm Service: 4-35(50) Sq. mm & Neutral 16-95 Sq. mm Service: 2-15 Sg. Mm)}

Earthing set complete with G.I. wire.

G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.)

Stay set complete with stay wire and insulator clamp etc.

Bolts & Nuts with washer.

Sundaries,Pole painting, Danger plate, Number Plate etc.

New LT Line Using 3 phase 4 wire with AB Cable (3X95+1X70)Sq.mm (58.50 KM.)

8.0 m S.T.P.(410:SP-14) (embossing as per drawing of MSPDCL)

M.S. cross arm (75X40) mm, 500 mm long

Back clamp for cross arm

Dead end fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

Suspension fittings for AB Cable with Insulated messenger wire complete with Eye hook as per Construction Standards :

AB Cable (3x95+1x70)Sq.mm with insulated messenger/Neutral

Insulation piercing connector suitable for AB Cable (95/70 Sq.mm. Main & Branch) as per TS & Construction Standard {Main 16-95 Sq. mm Service: 4-35(50) Sq. mm & Neutral 16-95 Sq. mm Service: 2-15 Sg. Mm)}

Earthing set complete with G.I. wire.

G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.)

Stay set complete with stay wire and insulator clamp etc.

Bolts & Nuts with washer

Sundaries,Pole painting, Danger plate, Number Plate etc.

Description of Work / Item(s)

Erection

New 11 KV line using ACSR Rabbit for New Feeders (33.0 Km)

Detailed Route survey for new lines and submission of route profile/alignment etc. all complete

Jungle clearance including tree cutting along the line including trimming, loaping, branching etc as required to maintain staturory electrical clearance as per the direction of Engineer-in-charge

Erection of Single Pole including excavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials,geo-tagging of assets created, paints,etc) complete as per Technical Specification

Erection of Double Pole including excavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials,geo-tagging of assets created, paints,etc) complete as per Technical Specification

Fitting & fixing of all line accessories like"Y" cross arms, channels, brackets, danger board, anticlimbing device (including supply of nuts&bolts,etc.) complete as per specification for Single Pole.

Fitting & fixing of all line accessories like cross arm, DP channels, DP cross brackets, all types of clamps,danger board, anticlimbing device etc. complete(including supply of nuts&bolts,GI through bolt,etc) as per specification for Double Pole Structure

Pipe Earthing including fixing of 1mtr long GI pipe in all kinds of soils complete as per approved drawing and Technical Specification 1set/location

Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification

Stringing of line (3 wires) including paying out and sagging of conductor, and mid point jointing of ACSR Weasel conductor, installation of disc/ pin insulator alongwith all necessary hardwares and accessories as per Technical Specification.

Providing of 11 KV AB Switch/G.O. Switch with Galvanised X-arm etc.

Installation of Distribution Transformer

Installation of New Distribution Transformer of 63 KVA (36 Nos )

Erection, testing & commissioning of 3-ph, 50Hz., 11/0.415kV, 63 KVA, Distribution Transformers including erection of DP Structure,DTR Cubicle for DTRs (Comprising of requisite and adequate ratings of MCCBs/MCBs for LT protection in incomer and outgoing along with accessories required) including loading, unloading etc. AND also providing of all civil works viz., Foundation (including the cost of cement, steel etc. may be required for foundation materials) as per TS and approved drawings.

Providing of Sub-Station Earthing (Set of 3 Earthing Pit) with all accessories complete.

Laying, dressing, testing and commissioning of 1.1kV, 3.5 core PVC insulated steel armoured single aluminium power cable with proper cramping, terminations etc. including supply of lugs, ferrules & termination sockets etc. including installation of Distribution Box as per approved drawing and TS

Fixing of Danger Board

Erection, testing and commissioning of 9 kV, 1-ph, Gapless Lightning / surge arrestor complete with insulating base, terminal connectors etc. and all fittings & accessories, including erection of associated structures, complete as per TS

Erection, testing and commissioning of 11 kV, 200A, 3-ph, Gang operated AB switch along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and all fittings & accessories including erection of associated structures, complete as per TS

Fixing of 11kV, 3-ph, DO switch along with support insulators operating mechanism, terminal connectors along with all other accessories complete as per TS for erection, testing and commissioning

Erection, testing and commissioning of 3 phase Tri-vector Energy meter with Kiosk

Installation of New Distribution Transformer of 100 KVA (48 Nos )

Erection, testing & commissioning of 3-ph, 50Hz., 11/0.415kV, 100 KVA, Distribution Transformers including erection of DP Structure, DTR Cubicle for DTRs (Comprising of requisite and adequate ratings of MCCBs/MCBs for LT protection in incomer and outgoing along with accessories required) including loading, unloading etc. AND also providing of all civil works viz., Foundation (including the cost of cement, steel etc. may be required for foundation materials) as per TS and approved drawings.

Providing of Sub-Station Earthing (Set of 3 Earthing Pit) with all accessories complete.

Laying, dressing, testing and commissioning of 1.1kV, 3.5 core PVC insulated steel armoured single aluminium power cable with proper cramping, terminations etc. including supply of lugs, ferrules & termination sockets etc. including installation of MCCB as per approved drawing and TS

Fixing of Danger Board

Erection, testing and commissioning of 9 kV, 1-ph, Gapless Lightning / surge arrestor complete with insulating base, terminal connectors etc. and all fittings & accessories, including erection of associated structures, complete as per TS

Erection, testing and commissioning of 11 kV, 200A, 3-ph, Gang operated AB switch along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and all fittings & accessories including erection of associated structures, complete as per TS

Fixing of 11kV, 3-ph, DO switch along with support insulators operating mechanism, terminal connectors along with all other accessories complete as per TS for erection, testing and commissioning

Erection, testing and commissioning of 3 phase Tri-vector Energy meter with Kiosk

Installation of New Distribution Transformer of 250 KVA (34 Nos)

Erection, testing & commissioning of 3-ph, 50Hz., 11/0.415kV, 250 KVA, Distribution Transformers including erection of DP Structure, geo-tagging , DTR Cubicle for DTRs (Comprising of requisite and adequate ratings of MCCBs/MCBs for LT protection in incomer and outgoing along with accessories required) including loading, unloading etc. AND also providing of all civil works viz., Foundation (including the cost of cement, steel etc. may be required for foundation materials) as per TS and approved drawings.

Providing of Sub-Station Earthing (Set of 3 Earthing Pit) with all accessories complete.

Laying, dressing, testing and commissioning of 1.1kV, 3.5 core PVC insulated steel armoured single aluminium power cable with proper cramping, terminations etc. including supply of lugs, ferrules & termination sockets etc. including installation of Distribution Box as per approved drawing and TS

Fixing of Danger Board

Erection, testing and commissioning of 9 kV, 1-ph, Gapless Lightning / surge arrestor complete with insulating base, terminal connectors etc. and all fittings & accessories, including erection of associated structures, complete as per TS

Erection, testing and commissioning of 11 kV, 200A, 3-ph, Gang operated AB switch along with support insulators operating mechanism, Base Channel down Pipe, terminal connectors and all fittings & accessories including erection of associated structures, complete as per TS

Fixing of 11kV, 3-ph, DO switch along with support insulators operating mechanism, terminal connectors along with all other accessories complete as per TS for erection, testing and commissioning

Erection, testing and commissioning of 3 phase Tri-vector Energy meter with Kiosk

Aerial Bunched Cables

New LT Line Using 1 phase 2 wire with AB Cable (1x35+1x25)Sq.mm (5.0 Km)

Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification

Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification

Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole.

Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete.

Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification

Stringing of LT AB Cable (1x35+1x25 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, etc. complete in all respect as required as per Construction Standard

Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge

New LT Line Using 3 phase 4 wire with AB Cable (3x50+1x35)Sq.mm (110.0 Kms)

Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification

Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification

Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole.

Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete.

Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification

Stringing of LT AB Cable (3x50+1x35 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, etc. complete in all respect as required as per Construction Standard

Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge

New LT Line Using 3 phase 4 wire with AB Cable (3x70+1x50)Sq.mm (174.0 Kms)

Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification

Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification

Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole.

Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete.

Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification

Stringing of LT AB Cable (3x70+1x55 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, etc. complete in all respect as required as per Construction Standard

Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge

New LT Line Using 3 phase 4 wire with AB Cable (3x95+1x70)Sq.mm (58.50 Kms)

Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification

Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification

Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole.

Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete.

Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification

Stringing of LT AB Cable (3x95+1x70 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, etc. complete in all respect as required as per Construction Standard

Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge

Description of Work / Item(s)

T and T Projects Ltd

VINDHYA TELELINKS LIMITED

TECHNO POWER ENTERPRISES PVT LTD

Shyama Power India Limited

Gupta Power Infrastructure Limited

INDUSTRIAL SYSTEMS LLP

T and T Projects Ltd

TECHNO POWER ENTERPRISES PVT LTD

Shyama Power India Limited

VINDHYA TELELINKS LIMITED

Bidder Name

T and T Projects Ltd

Shyama Power India Limited

TECHNO POWER ENTERPRISES PVT LTD

INDUSTRIAL SYSTEMS LLP

Gupta Power Infrastructure Limited

VINDHYA TELELINKS LIMITED