REPAIR REPLACEMENT OF FLOOR PATH, PLINTH PROTECTION AND CHEQURED INTERLOCKING TILES, FENCING , COMPOUND WALL DRAIN AND MISC ITEMS IN THE AREA OF MALL ROAD AND AT THE PREMISES OF AATS UNDER AGE B R-I OF GE (EAST) AGRA

Amount

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Dismantling of wrought iron of mild steel work of any description not otherwise poivided complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from concrete/ brick work masonry etc and making good disturbed ground complete all as specified and directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item no 05 above but except brick (using old brick) complete all as specified and directed.

M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface fair and even complete all as specified and directed.

M&L, rendering 15 mm thick in CM 1:4 on surface other than fair face of brickwork or on one side of lathing and finishing surface fair and even complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash as a priming coat complete all as specified and directed.

M&L for raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and directed.

M&L for flush pointing in cement mortar 1:4 to brick walls in drain/ boundary wall etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone Aggregate) as in surface channel and drains manhole etc complete all as specified and directed.

M&L for PCC 1:2:4 Type BO ( using 12.5 mm graded stone aggregate), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary formwork etc complete all as specified and drected

S & F angle iron as in post and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc including all necessary drilling bolting, and simillar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for preparation of newly steel surfaces and applying two coats of sythetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described complete all as specified and directed.

M&L for preparation of old steel surfaces and applying one coat of sythetic enamel paint of any description ,over 10cm in width or girth not otherwise described complete all as specified and directed.

S&F in repais galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

M&L for restraining resecuring including making good staples etc. old galvanised steel barbed wire with galvanised mild steeled wire staples or steel pins etc complete all as specified and directed.

S&F in repairs for GI chain link fencing of mesh of size 50mmx50mmx3mm dia fixing of chain link fencing including line wires to any type of standards, rails, straining bolts, etc. including provission of flat iron for securing with post complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level)complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broom finish complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in hard standing and plinth protection etc complete all as specified and directed.

M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 25 mm thick set, jointed & pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 60mm thick M-35 precast PCC interlocking coloured paver rubber moulded block factory made single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine conforming to IS 15658-2006 including laid and jointed over 25mm thick sand cushion complete all as specified and directed.

M&L for broken brick hard core, broken to gauge n exc 63 mm for levelling the surface complete all as specified and directed.

S & F for ornamental and intricate design framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&Lfor demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 Type A-1 (using 20mm graded stone aggregate) (nominal mix) for slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies,deck slabs and in shelves etc complete all as specified and directed.

M&L formwork to soffits of suspended slabs suchas roof slabs, floor slabs, landing and similar work n exc 200mm thick (Horizantal or sloping ) for flat foir finished surfaces complete all as specified and directed.

M & L formwork to edges of concrete roofs exc 10cm n exc 20cm wide for fair finished surface complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or depth for foundation etc or for shafts, wells, cesspits, pier holes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft and loose soil.complete all as specified and directed.

Returning filling in soft/loose soil incl. spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed.

M&L for PCC 1:2:4 type B1 molded precast kerb stone of size (300x150x300mm) including jointed, pointed in cement mortar 1:4 embeding in the ground to a depth as directed, taping earth around kerb stone and also removing surplus soil etc including demolition of old kerb stone complete all as specified and directed.

M/s Salim Mohomad

M/S Chadha Brothers

M/S OMKAR SINGH YADAV

M/s S. K. Construction Co.

SHRI SAINATH ENGINEERS

m/s shanti consruction co

Balaji Associates

MNR ASSOCIATES