REPAIRS / REPLACEMENT OF SIGN BOARDS / DTGM, GRASS CUTTING OF SHOULDERS OF RUNWAY / TAXI TRACKS / PTT / LINKS / DISPERSALS ETC INCLUDING SAND FILLING AND PLOUGHING OF SGA AND OTHER RELATED WORKS AT AIR FORCE STATION UDHAMPUR

Amount

S&F for removal of old damaged polycarbonate sheet of thickness not less than 2 mm and applying self adhesive reflective tape/ sheet background of approved tint/ colour as in Cautionary/ Sign boards of airfield complete all as specified and directed by Engineer-in-Charge.

S&F self adhesive retro reflective tape of approved tint/colour for writing alphabets / numbers / letters / arrows / etc. as in Cautionary / Sign boards of air field complete all as specified and directed by Engr-in-Charge Note. Qty shall be measured based on length/width and height of letters cut from a square/rectangular sheet.

S&F self adhesive reflective tape background including preparation of surfaces as taking down of existing self adhesive reflective tape background including alphabets / numbers / letters in DTGM / Cautionary boards / Sign boards complete all as specified and directed by Engr-in-Charge Note Alphabets / Numbers / letters shall be measured and paid separately.

M&L for replacement of existing sign board of size exc 0.36 Sqm and n. exc 0.81 Sqm with following specifications or as directed by Engineer-in-Charge:- (a) Main frame (double) for sign board shall be made of aluminium square / rectangular hollow section not less than 63.50 mm x 38.10 mm x 1.20 mm incl supply & fixing of polycarbonate sheet of size exc 0.36 Sqm and n. exc 0.81 Sqm both side of aluminium frame. (b) The height of bottom side of Board shall be minimum 300 mm below ground level with PCC 1:4:8, type D1, using 20 mm graded crushed stone aggregate. (c) The numbers/letters/digit/sign/lines/arrows etc made of retro reflective tape having reflective tape background shall be fixed over 2 mm thick Polycarbonate sheet of approved colour Note : Before procurement/ supply, sample of board shall be produced by the contractor for approval of GE.

M&L for replacement of existing sign board of size exc 0.81 Sqm and n. exc 1.50 Sqm with following specifications or as directed by Engineer-in-Charge:- (a) Main frame(double) for sign board shall be made of aluminium square / rectangular hollow section not less than 63.50m x 38.10mm x 1.2mm incl supply & fixing of polycarbonate sheet of size exc 0.81 Sqm and n exc 1.50 Sqm both side of aluminium frame. (b) The height of bottom side of board shall be minimum 450 mm above ground level or as per user requirement and the board shall be fixed minimum 300 mm below ground level with PCC 1:4:8 type D1, uding 20 mm graded crushed stone aggregate. (c) The numbers/letters/digit/sign/lines/arrows, etc. made of retro reflective tape having reflective tape background shall be fixed over 2 mm thick Polycarbonate sheet of approved colour. Note: Before procurement/supply, sample of board shall be produced by the contractor for approval of GE.

Labour only for totally cleaning the top surface with steel wire brush and finally fanning with compressed air to making the surface free from all loose materials i.e dirt/dust etc to entire satisfaction of Engr-in-Charge and applying cold polymeric bitumen emulsion (PME) mopping of total cold liquid PME ( minimum 1 ltr & maximum upto 2 ltr per sqm for two coats after dilution with 50% water ), each coat diluted in the ratio 1:1 (PME: WATER) and ensure uniform finish of runway complete all as per manufacturers instruction and all as specified and as directed by Engr-in-Charge. Note:- The tenderer shall take into consideration for the following points while quoting his rate for the items:- (a) The work shall be carried out through authorized and qualified applicator of the manufacturer only. (b) Care shall be taken to fill wider gaps/cracks with 0.6mm to 2.36mm size coarse sand as per manufacturers instruction. (c) Workman ship & quality of work is as per satisfaction of user & Engr-in-charge.

Supply only cold polymeric bitumen emulsion (PME). Note: (a) Only undiluted quaintly will be measured under this item. (b) The item will be used against quantity of PME requiredabover item No 6 above. ( c) All material deposited to AGE BR-I office before work start. (d) All empty drum also deposited AGE BR-I office till completion of work.

Cutting of Grass Shurbs, Weeds, Bushes, Vegetations, etc. with the help of Bush Cutting Machine including small trees girth up to 30cm along the Sides of Runway, PTT, Links, etc. including collecting and disposing all waste, trimmings etc outside AF land as required, complete all as specified and as directed. NOTES: (1) The height of grass shrubs, weeds, bushes, vegetation etc should not exceed 200mm after cutting and it shall measured in Pocket wise which includes cutting of edges in drain/PTT/ any area other than grass surfaces. (2) Measurement for payment shall made be after execution of above mentioned requirement in pocket wise. (3) Pocket/Task area shall be as decided and directed by Engineer in Charge. (4) Proper record shall be maintained wrt location & date of execution of work. (5) Disposal of waste is deemed to be included in quoted rates. Contractor shall ensure immediate removal of all waste materials after cutting, trimming etc under his own arrangement and dispose off outside AF land as per Municipal Corporation/State Govt regulations. (6) Contractor shall ensure that the waste/trims are not blown on runways, PTT, links etc and shall depute labourers for immediate cleaning/sweeping & removal from site to avoid FOD. Contractor's quoted rate shall be deemed to be inclusive of the above aspect.

All as per item No. 01 here-in-before but with the help of Jungle Jim Tractor. NOTE: CONTRACTOR SHALL PROVIDE MINIMUM 02 NOS BUSH CUTTING MACHINE & 01 NO JUNGLE JIM TRACTOR ALONGWITH SKILLED OPERATOR MIN ONCE IN A WEEK OR AS REQUIRED BY USER. JUNGLE JIM SHALL BE COVERED IN A MANNER SO THAT GRASS SHOULD NOT BE SPREAD OUT SIDE THE CUTTING AREA TO AVOID FOD AT AIRFIELD.

Scrapping of grass shurbs, weeds, bushes, vegetation etc manually at ground level including removal of small irregularities in natural ground & levelling including collecting and disposing all waste, trimmings etc outside AF land as required, complete all as specified and as directed by the Engineer-in-Charge. NOTES : (1) This item is intended for narrow stretch or location which is inaccessible by machines. Measurement for this item shall be considered upto a max width of 75cm. (2) Proper record shall be maintained wrt location & date of execution of work. (3) Disposal of waste is deemed to be included in quoted rates. Contractor shall ensure immediate removal of all waste materials after cutting, trimming etc under his own arrangement and dispose off outside AF land as per Municipal Corporation/State Govt regulations.

Ploughing of SGA not less than 30 cm in depth using plant & its connecting tools required for ploughing complete all as specified and directed.

APARANA ENTERPRISES (BID ID -3126689)

DAVINDER SINGH (BID ID -3134170)

SHIVAE CONSTRUCTION (BID ID -3125944)

M/S SHREE RAM DUBEY AND SONS (BID ID -3135418)