8184-REPAIRS/MAINT OF EXTERNAL WATER SUPPLY, PUMPSETS, DG SETS, CLEANING OF OH TANKS, UG SUMPS, WELLS AND CONNECTED WORKS AT MH, DEFENCE COLONY, NANDAMBAKKAM, MAP ACCN, PO COLONY, USMAN LINE, OFFICERS MESS OTA AREA AND VARIOUS LOCATIONS UNDER GE STM

Amount

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation for laying pipes etc and getting out in Hard / Dense soil all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soil all as specified and directed.

Removing excavated material/ surplus soil to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point all as directed.

Supply and laying GI tubing of 15mm bore galvanized medium grade of any length including all fittings such as bend, elbow, tee and union laid in trenches or on floors/ walls/ceilings , including taking up of unserviceable / rusted tubing and connections complete all as specified and directed.

All as per item No.4 herein before but for 20mm bore pipe

All as per item No.4 herein before but for 25mm bore pipe

All as per item No.4 herein before but for 40mm bore pipe

All as per item No.4 herein before but for 50mm bore pipe

All as per item No.4 herein before but for 65mm bore pipe

All as per item No.4 herein before but for 80mm bore pipe

All as per item No.4 herein before but for 100mm bore pipe

S & L DI Pipes of 100mm bore (including all fittings) with spigot and socket ends and rubber tyton joints including all fittings class K-7 suitable for rubber tyton joints complete,including taking up of unserviceable / rusted tubing and connections complete all as specified and directed by Engr-in-Charge.

All as per item No.12 herein before but of 150mm bore

All as per item No.12 herein before but of 200mm bore

Replacement in repair of unserviceable gun metal globe or gate valve of brass heavy duty ISI marked with iron wheel head, butterfly handle screwed both ends for iron pipe of 15mm bore complete in place of all as directed fixed in wall and ground.

All as per item No.15 here in before but for iron pipe of 20mm bore

All as per item No.15 here in before but for iron pipe of 25mm bore

All as per item No.15 here in before but for iron pipe of 40mm bore

All as per item No.15 here in before but for iron pipe of 50mm bore

All as per item No.15 here in before but for iron pipe of 80mm bore

Replacement in repair of unserviceable cast iron 80mm bore sluice valve IS 14846-200 PN1.6 both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolts nuts and washers graphite rope complete incluting taking down the old unserviceable valves. Make :- Kirlosker

All as per item No.21 here in before but for 100mm bore

ALL as per item No.21 here in before but for 150mm bore

All as per item No.21 here in before but for 200mm bore

Replacement of foot valve gun metal flange type heavy duty of 50mm bore complete with gasket, bolt & nut, washer etc conforming to IS 4038 duly fitted in suctio line of centrifugal pumset/ monoblock pumpset inside the UG sump all as specified and directed.

ALL as per item No.25 here in before but for 80mm bore

ALL as per item No.25 here in before but for 100mm bore

ALL as per item No.25 here in before but for 200mm bore. (For 100 ORs main pump house,Nandambakkam)

Replacement of cast iron double flanged non return valve of size 150mm as per IS 5312/2004, PN 1.6 and body seat of gun metal of size 150mm including rubber gasket, bolt & nut and ashers etc complete all as specified.

ALL as per item No.29 here in before but for 100mm bore

ALL as per item No.29 here in before but for 80mm bore Make for item Nos.29 to 31 : - Kirlosker

Cutting the existing damaged 150mm dia CI/DIPipe line in position supply and inserting CI collar of 150mm and providing lead and testing including necessary earth work in sludgy soil, dewatering and refilling the same in layers complete all as specified and directed by Engr-in-charge

All as per item No.32 here in before but of 200mm bore pipe

Demoition of the existing unserviceable valve chamber, M & L for construction of brick masonary (230mm thick wall) valve pipt of size 600 x 600 x600mm inner dimension including necessary earth work, PCC 1:4 8, 75mm thick Type D-2 using 40mm graded stone aggregate as in foundation , brick wall build in CM 1:6, rendering 15mm thick with CM 1: 6 externally upto 15 CM below GL and CM 1:4 internally and providing angle Iron base frame and MS Sheet cover 3.15mm thick welded with hinges including necessary locking arrangement with handle, in and including dismantling & taking down old unserviceable broken Covers Complete. all as specified and directed by Engr-in-Charge.

All as per item No.34 here in before but of size 900 x 900 x 900 mm depth

All as per item No.34 here in before but of size 1000 x 1000 x 1000 mm depth

Supply & Fixing for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm-690 gms) suitable for following sizes in & including replacement old valve complete all as specified..

20mm bore pipe

25mm bore pipe

40mm bore pipe

S & F water level indicator made out of 2 mm thick Joint less MS sheet fixed to outer wall of sump on frame work of MS angle 50x50x6mm with steel wire rope, wheel and float and indicator suitable and complete for sump height (appx 12 Feet) duly marked with water level in both units ie feet and glns all as per site requirement and direction of engineer in charge including dismantling taking down old unserviceable water level indicators complete.

S & F Mild steel man hole covers for sump / water storage tank / filter plant channels, Made out of 3mm thick MS sheet with fixed on the man hole / inspection holes of the sump / water tank / filter plant channels with steel frame (Fe 410-W Gde E- 250 Quality B) and locking arrangements at any position, any height, all as required at site all as per direction of engineer in charge including dismantling taking down old unserviceable broken Covers complete.

Supply and fix Gland rope (graphite rope) (size 1/2",1/4",3/4") incluidng taking out old unserivceable all as directed.

Cutting and cleaning the bushes and unwanted plant growth inside E/M installations and depositing at a distance not less than 50 m from perimeter wall / fencing of installation at various places all as directed.

Supply and Fix MCCB 3 pole 25 to 100 Amps with breaking capacity 25kA, 415 Volts, 50 Hz AC as per the site Requirement including taking down of old unserviceable all as directed.

All as per item No.42 here in before but of capacity 160 Amps 36 KA

Supply and Fix MCCB 4 pole 63 Amps with breaking capacity 16 KA, 415 Volts, 50 Hz AC as per the site Requirement including taking down of old unserviceable all as directed.

Supply and Fix MCCB 4 pole 100 Amps with breaking capacity 25kA, 415 Volts, 50 Hz ACas per the site Requirement including taking down of old unserviceable all as directed.

Supply and Fix MCCB 4 pole 125 Amps with breaking capacity 25kA, 415 Volts, 50 Hz ACas per the site Requirement including taking down of old unserviceable all as directed.

Supply and Fix MCCB 4 pole 200 Amps with breaking capacity 36kA, 415 Volts, 50 Hz ACas per the site Requirement including taking down of old unserviceable all as directed. Make for item Nos 42 to 47 :- Standard or equivalant

Developing / flushing of bore wells for a period of 6 hours using compressed air method upto availability of crystal clear water including removing and fixing the installation in original location all as specified and directed.

Supply and fixing HDPE pipe 110mm joint including necessary heat of HDPE pipes, flanges bolts, nuts, washers, rubber packing all as required at sit at any position and location incl necessary excavation, returning refilling removing old unserviceable HDPE flanges nuts bolts

All as per item No.49 above but for 90mm bore

All as per item No.49 above but for 63mm bore

Supply and laying in trenches High Density polyethylene pipes (HDPE) of pressure rating NP 6 conform to IS 4984 madePE 80 / PN 10 including all fitting of size 110mm dia

Supply and laying in trenches High Density polyethylene pipes (HDPE) of pressure rating NP 6 conform to IS 4984 madePE 80 / PN 10 including all fitting of size 90mm dia

Supply and laying in trenches High Density polyethylene pipes (HDPE) of pressure rating NP 6 conform to IS 4984 madePE 80 / PN 10 including all fitting of size 65mm dia Make for item Nos 52 to 54 : - Reliance / Jain

Dismantling the defective mono block or Jet pump set of capacity 1 HP from foundation by opening of coupling and foundation bolts and transpoting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts includng repair / replacement of worn out parts and spray paintng with one coat of existing colour paint and writing SM/MES No with white paint and installation commissioning and testing on full load complete all as specified and directed by Engineer - in - Charge. Note:- (i) The rate quoted for this item shall includes labour charge only for maint repair and replacement of defective/UNSV spares/accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/spares such as nut, bolts washers, gaskets, paints etc which are not covered under Sch 'A' but required for effective functioning of the plant shall be deemed to included in this item.

All as per Item No. 55 above but for capacity 2.0 to 3.0 HP three phase mononlock pumpset

All as per Item No. 55 above but for capacity 5.0 HP three phase mononlock pumpset

All as per Item No. 55 above but for capacity 7.5 HP three phase mononlock pumpset

All as per Item No. 55 above but for capacity 10.0 HP three phase mononlock pumpset

All as per Item No. 55 above but for capacity 15.0 HP three phase mononlock pumpset

Supply only the following items /parts for 2 to 3 HP mono block pump set

CI Impeller

Ball bearing

Supply only the following iems /parts for 5 HP mono block pump set

CI Impeller

Ball bearing

Motor coupling assembly with tyre

Supply only the following iems /parts for 7.5 HP mono block pump set

CI Impeller

Ball bearing

Motor coupling assembly with tyre

Supply only the following iems /parts for 10 HP mono block pump set

CI Impeller

Ball bearing

Motor coupling assembly with tyre

Supply only the following iems /parts for 15 HP mono block pump set

CI Impeller

Ball bearing

Motor coupling assembly with tyre

Dismantling the motor of monoblock pumpset of capacity 2.0 to 3.0 HP removing the existing burnt out winding and rewinding with copper winding wire of existing gauge and weight including replacement of all insulation material and terminal lead for AC single phase 230 volts grade and other petty items required for making motor functional and motor reassembling and shifting back to pump house and testing complete all as directed by Engineer-in-Charge

All as per Item No. 66 above but for capacity 5.0 HP three phase mononlock pumpset

All as per Item No. 66 above but for capacity 7.5 HP three phase mononlock pumpset

All as per Item No. 66 above but for capacity 10.0 HP three phase mononlock pumpset

All as per Item No. 66 above but for capacity 15.0 HP three phase mononlock pumpset

All as per Item No. 66 above but for capacity 20.0 HP three phase mononlock pumpset

Dismantling the defective centrifugal pump set of capacity 12.5HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and spray paintng with one coat of existing colour paint and writing SM / MES No with white paint and installation commissioning and testing on full load complete all as specified and directed by Engineer-in-Charge.

All as per Item No.72 above but for capacity 20 HP three phase centrifugal pumpset

All as per Item No.72 above but for capacity 25 HP three phase centrifugal pumpset

All as per Item No.72 above but for capacity 100 HP three phase centrifugal pumpset

Supply only the following items / parts for 12.5HP centrifugal pump set

CI Impeller

Ball bearing

Shaft

Motor coupling set

Supply only the following items / parts for 20 HP centrifugal pump set

CI Impeller

Ball bearing

Shaft

Motor coupling set

Dismantling the motor of centrifugal pumpset of capacity 12.5 HP, removing the existing burnt out winding and rewinding with copper winding wire of existing gauge and weight including replacement of all insulation material, and terminal lead for AC, 3 Phase, 415 volts grade and other petty items required for making motor functional and motor reassembling and shifting back to pump house and testing complete all as directed by Engineer-in-Charge

All as per Item No.78 above but for capacity 20 HP three phase centrifugal pumpset

All as per Item No.78 above but for capacity 25 HP three phase centrifugal pumpset

All as per Item No.78 above but for capacity 100 HP three phase centrifugal pumpset

Taking out defective submersible pump set of capacity 3HP from bore well for repair by lifting GI tubing of size 50 mm from up to 220 feet depth after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T&P, transporting to workshop including repair/replacement of worn out parts, servicing and overhauling complete with oiling/greasing, lubricating the parts and reassembling and painting of submersible pumpset with motor with one coat of synthetic enamel paint after clearing and scrupbing and shifting back to borewell, lowering commissioning and testing on full load complete all as specified and directed by Engineer-in-charge.

All as per item No.82 hereinbefore but for capacity 5HP submersible bore well pumpset

All as per item No.82 hereinbefore but for capacity 7.5HP submersible bore well pumpset

All as per item No.82 hereinbefore but for capacity 10 to 12.5HP submersible bore well pumpset

All as per item No.82 hereinbefore but for capacity 15 HP submersible bore well pumpset

Supply only the following items / parts for 3HP submersible borewell pump set.

Thrust bearing complete

Gun metal bearing bush.

Stainless steel studs and nuts

Shaft for pump

Bowl assembly

Oil seal body

Supply only following items / parts for 5HP submersible bore well pump set.

Thrust bearing complete

Gun metal bearing bush.

Stainless steel studs and nuts

Shaft for pump

Bowl assembly

Oil seal body

Supply only following items / parts for 7.5HP submersible bore well pump set.

Thrust bearing complete

Gun metal bearing bush.

Stainless steel studs and nuts

Shaft for pump

Bowl assembly

Oil seal body

Supply only following items / parts for 10 to 12.5HP submersible bore well pump set.

Thrust bearing complete

Gun metal bearing bush.

Stainless steel studs and nuts

Shaft for pump

Bowl assembly

Oil seal body

Supply only following items / parts for 15HP submersible bore well pump set.

Thrust bearing complete

Gun metal bearing bush.

Stainless steel studs and nuts

Shaft for pump

Bowl assembly

Shaft for motor

Stainless steel motor coupling with key

Bowl assembly ring

Dismantling the motor of submersible (vertical type) pumpset of capacity 3 HP, removing the existing burnt out winding and rewinding with PVC copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and filling of cooling oil with oil seal and terminal lead for AC, 3 Phase, 415 volts grade and other petty items required for making motor functional and motor reassembling and testing complete all as directed by Engineer-in-Charge.

All as per item No.92 hereinbefore but for capacity 5 HP submersible bore well pumpset

All as per item No.92 hereinbefore but for capacity 7.5 HP submersible bore well pumpset

All as per item No.92 hereinbefore but for capacity 10 to 12.5 HP submersible bore well pumpset

All as per item No.92 hereinbefore but for capacity 15 HP submersible bore well pumpset

Taking out defective submersible openwell pump set of capacity 5 HP from open well/UG sump for repair by lifting GI tubing of size 50 mm from up to 40feet to 10 to 15feet depth after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T & P, transporting to workshop including repair/replacement of worn out parts, servicing and overhauling complete with oilling/greasing, lubricating the parts and reassembling and painting of submersible pumpset with motor with one coat of synthetic enamel paint after clearing and scrubbling and shifting back to openwell/ UG Sump, lowering commissioning and testing on full load complete all as specified and directed by Engineer-in-charge.

All as per item No.97 hereinbefore but for capacity 7.5 HP submersible openwell pumpset

Supply only following items / parts for 5 HP submersible openwell pump set.

Thrust bearing

Gun metal bearing bush.

Stainless steel studs and nuts

Impeller

Impeller key

Rotor sleeve

Supply only following items / parts for 7.5HP submersible open well pump set.

Thrust bearing

Gun metal bearing bush.

Stainless steel studs and nuts

Impeller

Impeller key

Rotor sleeve

Dismantling the motor of submersible openwell pumpset of capacity 5 HP, removing the existing burnt out winding and rewinding with PVC copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and filling of cooling oil with oil seal and terminal lead for AC, 3 Phase, 415 volts grade and other petty items required for making motor functional and motor reassembling and testing complete all as directed by Engineer-in-Charge

All as per item No.101 hereinbefore but for capacity 7.5 HP submersible openwell pumpset

All as per item No.101 hereinbefore but for capacity 10 HP submersible openwell pumpset

Replacement of submersible PVC insulated cable of 650/1100 volts grade 3 core 6 sqmm with flexible copper conductor water resistant quality ISI marked in replacement.

All as per item No.104 hereinbefore but of cable size 3 core 4 sqmm

All as per item No.104 hereinbefore but of cable size 3 core 2.5 sqmm

Material and labour for servicing DG Set Engine complete oil servicing, necessary replacement of below mentioned spares and servicing work for 250 KVA DG Set incl 6 months warrantee for servicing. (a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltr.

Material and labour for servicing DG Set Engine complete oil servicing, necessary replacement of below mentioned spares and servicing work for 62.5 KVA DG Set incl 6 months warrantee for servicing .(a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltr.

Material and labour for general oil servicing of DG Set Engine complete and replacement of below mentioned spares and servicing work for 15 KVA DG Set incl 6 months warranty for servicing .(a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltr.

Material and labour for general oil servicing of DG Set Engine including minor defects rectification like Auto ON/OFF, Alarm, Battery charging, complete and replacement of below mentioned spares and servicing work of capacity 10 /12.5KVA incl 6 months warranty for servicing all as specified and as directed.(a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltr.

Dismantling self starter of any make from diesel engines of any make, opening up, overhauling / servicing including replacement of armature coils bushes carbon brushes, springs, screws, etc., assembling back, re-fixing and testing for genset capacity following capacity:-

DG set 250 KVA

DG set 62.5 KVA

DG set 10 to 15 KVA

M&L fuel pump & Fuel injectors calibration charges for DG set capacity upto 62.5 KVA complete all as specified and as directed by Eng-in-Charge.

'V' belt for fan / dynamo / water pumps for genset capacity upto 62.5 KVA Make : FENNER / DUNLOP

M&L for replacement of automatic voltage regulator (AVR) of armature of DG set capcity upto 62.5 KVA, 415 volts 3 phase 1500 RPM 50 Hz suitable make.

Renewal of unserviceable lead acid recgargeable batteries by new of 4 cell 12 volts, 180 AH duly initial charged for Genset Make: Exide or equivalent in Amaron

Renewal of unserviceable lead acid rechargeable maintenance free batteries by new of 4 cell 12 volts, 90 AH duly initial charged for Genset Make: Exide Express

Battery lead with flexible copper conductors PVC insulated of size single core 50 sqmm suitable for 12/24 volts batteries Make : HAVELLS/FINOLEX.

Battery terminal clamp with bolts and nuts, brass suitable for 50 sqmm single core copper multistraded cable and 12 V, 180 AH battery terminal posts. Make : SHANCO.

Terminal socket for battery lead copper suitable for 50 sqmm single core copper multistranded cable

Asbestos rope 10mm dia wound on exhaust pipe

PVC transparent pipe 8mm bore dia and 2mm thick connecting upto for fuel inlet/overflow links, fuel tank, fuel indicator

Dismantling battery, replacing unserviceable terminal posts PVC cap re-charging the battery to the required standard replacing the electrolyte all as specified ad directed for12 Volts battery upto 180 AH capacity.

M&L for old painted surface of Gen Set of any make/model /capacity and applying one coat of synthetic enamel paint including writing MES No after cleaning and rubbing the existing surface of Gen Set complete all as specified and directed.

Cleaning the internal surfaces of Over Head Tank at any height / staging by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and ceilings and one coat of cement base paint to all external surfaces including top surfaces of OH tanks at any height and any position. All old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall be not less than 60x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed by Engineer-in-charge for 10000 gallons capacity. NOTE : proper safety measure must take while painting.

All as per item No.123 above but for 20,000 gallons capacity

All as per item No.123 above but for 40,000 gallons capacity

All as per item No.123 but for 50,000 gallons capacity

All as per item No.123 but for 1,00,000 gallons capacity

Preparing the old steel / MS tubing and CI painted surfaces of pipe line with one coat of synthetic enamel paint black colour to existing suction pumping line near the pump house sump to pump house from pump to delivery line through raising and delivery main of the Overhead tank of following sizes of pipe:

DI /CI/GI Pipe 200 mm dia

MS/CI/DI pipe 150 mm dia

MS /CI/GI pipe 100 mm dia

CI/GI pipe 80 mm dia

GI pipe 50 mm dia

GI pipe 25 mm dia

GI pipe 20 mm dia

Cleaning the internal surfaces of Under Ground Sump by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and bottom of room. All old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be painted with one coat of anti corrosive bituminous paint.ONE coat synthetic outdoor anti corrosive bitumius paint in outdoor surface at any height at any position. Paintings to oblitering labels shall be not less than 60 x 40 cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete as directed by Engr-in-charge for 5000 gallons capacity

All as per Ser item No.129 herein before but 7500 gallons capacity

All as per Ser item No.129 herein before but 10000 gallons capacity

All as per Ser item No.129 herein before but 20000 gallons capacity

All as per Ser item No.129 herein before but 50000 gallons capacity

Desilting of open / shallow wells of following size mentioned below by bailling out of water from the well through pump set, removing the silt (mud/sand etc) from the floor of the wells and deposting not exceeding 50 metre, cleaning the inside vertical surface of the wells with wire brushes including removing the large growth and removing the large floating on the water completely all as specified and directed.

Well dia of 50 feet and 30 feet depth at Lawrance well and shallow well at OTA

Well dia of 30 to 33 feet and 40 feet depth Manapakkam well No 1 and Nandambakkam well No 1 and 4

Well dia of 30 feet and 48 feet depth Manapakkam well No 2,

Well dia of 30 feet and 30/40 feet depth (Usman line well, Signal well, GD Coy, Demo Coy well).

Well dia of 25 feet and 25 feet depth at OTA and MH Area (Auditorium well, 6 Rudhra road well, 7 Rudra Road, Ashar khana MES Quarter -01 No).

Servicing of LT Panel Board of any size , cleaning of panel board internally and externally Tightening of all screws and bolts & nuts replacing of minor parts like screws, washers lugs etc checking of servicelablity of all switch gears , insulating the live parts, including welding and painting all as specified and as directed by Engr-in -Charge

Preparation of old painted by scraping / cleaning with wire brushes to remove the old painting from pump & motor installed at all pump house and painted with one coat of approved enamel paint all as directed .

Supply and fix direct on line starter three phase suitable upto 5 HP Pumpset in sheet metal enclosure, 415V, including taking out old unserviceable all as directed.Make: L & T MF 1 or equivalent.

Supply and fix direct on line starter three phase suitable upto 7.5 HP Pumpset in sheet metal enclosure, 415V, including taking out old unserviceable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including prevention facility suitable for upto 10HP pump set including taking out old unservicable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including prevention facility suitable for 12.5 HP pump set including taking out old unservicable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including prevention facility suitable for 15 HP pump set including taking out old unservicable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including preventer facility suitable for 20/25 HP pump set including taking out old unservicable all as directed. Make for item Nos.138 to 143 : L & T M L 1.1 or equivalent

Supply and fixing in repair of Soft Auto star delta starter,heavy duty with three phase, 415 volts suitable for 100 HP Centrifugal pump Set heavy duty at 100 ORs pump house with built in by contactor, motor protection for 75 Kw 140 Amps CSX0075V4C1 Make L& T or equivalent in Siemens / ABB with Timed voltage ramp, soft stop, protection of supply fault,shorted scr LED indication, Relay outputs 66 to 110, IP00 enclosure, complete wiring etc including necessary accessories, modification in panel all as required at site dismantling old unserviceable one

Supply and fix single phase preventor 3 phase 415 volts including taking out old unservicable all as directed all as directed

Supply and fix brass check valve screwed type of following sizes and fitting the suction pipe inside the UG sump including taking out old unserviceable all as directed.

80mm dia

50mm dia

40mm dia

Cutting the existing damaged 200mm dia CI line in position supply and inserting CI collar of 100mm and testing including necessary earth work at any depth and width at any location using JCB in sludgy soil, dewatering and refilling the same in layers complete all as specified and directed by Engr-in-charge

All as per item No.147 here in before but of 150mm bore pipe

All as per item No.147 here in before but of 100mm bore pipe

M & L for run lead joint fixed in repairs including provision of spin yarn etc for 80mm bore CI pipe fitting complete all as directed

All as per item No.150 above but suitable for 100mm CI pipe fitting complete all as directed

All as per item No.150 above but suitable for 150mm CI pipe fitting complete all as directed

All as per item No.150 above but suitable for 200mm CI pipe fitting complete all as directed

Cutting the existing GI steel tubing 15/20/25mm bore and screwing the cut ends (or length) screw on pipe to form connector in trenches, floors or on walls and ceiling for alterations or addition and rejointing including connecting up with GI union, nipple and necessary GI fittings complete Note: Exacavation will be measured and paid seperately

All as per item No.154 above but for 40/50mm bore pipe

Cutting the existing GI steel tubing 80mm bore and screwing the cut ends (or length) screw on pipe to form connector in trenches , floors or on walls and ceiling for alterations or addition and rejointing including connecting up with GI Flange complete Note: Exacavation will be measured and paid seperately

All as per item No.156 above but for 100mm bore pipe

Supply and Fix Joist, channel, angle, or tee sections, fixed independently, with welding all as required at site for connecting plates Fe-410-W(Gde-E-250)quality-B etc complete all as specified and as directed by Engr-in-Charge

Demolition of concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) all as directed.

Material and labour for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for bed of pump set including necessary form work with fair finished surface all as directed.

Supply,install test and commission MONO block electrically driven pump set with CI impellar capable of pumping three phase 10 HP head 40 M Mechanical seal ,C40 shaft, TEFC Motor squirrel cage aircooled, induction motor AC 415 Volt 3 phase 50 Hz of mounted on comman base plate including necessary PCC foundations works, bolts and nuts for fixing including pressure gauge dial type of 6' size to read the delivery pressure along with air release coke including necessary priming pipe connections with valves all as specified and directed by Engr in charge.(a) Common base frame for electric motor and pumping set-01 No (b) Suitable size of flanged valve Foundation for pumpsets is inclusive of quoted; rate and detail drawing shall be submitted by the contractor for approval Make : Kirloskar/ equivalent Crompton Greeves /KSB Model KDS 840++

Supply, install test and commission of submersible pump set 150mm (6") Model KS6D-0806, Make Kirloskar / Equivalent Crompton Greaves or KSB pumps 120 LPM head 89 Mtr complete set electric driven 415 V, TP suitable for 200/250mm dia bore well 65mm delivery line to be mounted inside the casing pipe size 200/ 250mm complete 5.0 HP including dismantling GI pipes,Cables at any depth from the existing borewell and refixing the same all as required at site and as directed by Engineering - in - Charge

MOHAN ENTERPRISES

M/S.RANGA AND CO

RK ENTERPRISES