Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹31.7 L+₹1.9 L (6.54%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹34.7 L+₹5.0 L (16.7%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹39.0 L+₹9.2 L (31.0%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jaipur
GE Jaipur
COMPREHENSIVE MAINT INCL B/R, E/M, SEWAGE AND PERIODICAL OF JADUNATH VIHAR MD ACCN IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR
2023_MES_607017_1
GE/J-37/2023-24
Open Tender
Civil Works
Item Rate
335 days
GE Jaipur
As per Tender Documents
5 documents required · 5 mandatory
₹500
GE Jaipur
₹70,000
Yes
9 Nov 2023
30 Jun 2023
2 Sept 2023
30 Jun 2023
31 Aug 2023
17 Aug 2023
Amount
B/R Portion M&L for preparation of old plastered surfaces of wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying one coat of distemper oil emulsion with hand roller including all necessary arrangement for execution of work complete all as specified.
Complete removal of existing treatment on wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of distemper oil emulsion with hand roller over and including a coats of wall care putty including all necessary arrangement for execution of work complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old plastered surfaces of ceiling by washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of distemper oil emulsion with hand roller over and including a coats of wall care putty including all necessary arrangement for execution of work complete all as specified.
M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying one coat of white wash with brush complete all as specified and directed
,---ditto-- all as per item No 4 above but two coats of white wash on wall complete.
M & L for preparation of old plastered or unplastered decorated surfaces of ceiling and applying one coat of white wash with brush complete all as specified and directed
,---ditto-- all as per item No 6 above but two coats of white wash on ceiling complete all as specified and directed
M&L complete removal of exising treatment , washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty, including all necessary arrangement for execution of work and applying two coats of cement base paint using hand roller over and including one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified and as directed by Engineer-in-Charge.
M&L for one coat painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed by Engineer-in-Charge.
M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.
M&L for brick work with old size sub class 'B' Bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed
M & L for Brick work with old size sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed
M & L providing cement concrete 1:2:4 type B-1 (20 mm graded aggregates) as in coping over wall complete all as specified and as directed
M & L stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed
Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc 40mm for Sand stone and dressing of face beds and joints, as specified of random rubble walling uncoursed complete all as specified and as directed
M&L for ponting to squared rubble, coursed or uncoursed stone masonry with cement mortar in 1:4 as per specification complete all as specified and as directed
Taking down cement plaster or cement lime plaster on brick / stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed
M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed
M & L rendering 10mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement complete all as specified and as directed
M & L rendering 10mm thick on dubbing out surfaces on ceiling in CM (1:3) as floating/ setting coat in patches not exc 3 sqm each patch complete all as directed complete all as specified and as directed
M & L GI wire netting 0.90mm dia and 12mm mesh lathing to metal studding etc in ceilings including all laps, cutting and waste in repairs in patches n exc 5 sqm each including taking down old and jointing new to old as required complete all as specified and as directed.
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as directed
M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall over and incl a coat of primer complete all as specified and as directed.
M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint over and including one coat of alkali resistant priming paint complete all as specified and as directed.
M&L plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar complete all as specified and as directed
M & L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in coving at juction of chajja/slab and wall/ lintel/ beam finished even and smooth in any situation and position including form work complete all as directed
M&L 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking plat forms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.
M&L 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills, cooking platform etc over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and as directed
S & F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and as directed.
S & F in repair 4mm thick figured glass pin head type and glazing with oil putty in sqaures not exc 0.5 sqm in each panecomplete all as specified and as directed.
S&F MS bracket for curtain rod 25mm dia complete all as specified & directed.
S & F in repair drapery rod MS 25 mm dia incl fixing on brackets and including decorative knobs on each end of rod of approved pattern and colour complete including taking down old curtain rod with brackets complete all as specified and as directed.
S & F in repair swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and as directed.
Dismantling old unserviceable RCC / PVC water tank & removal from site complete all as directed capacity exceedind 250 ltr and not exc 500 ltrs
S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc including float valve complete all as specified in SSR Part I, complete all as specified and as directed.
S & F in repair 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gms) complete all as specified and as directed.
S & F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed.
S & F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Disconnecting existing tank of capacity exc 250 and not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc including replacement of float valve complete all as specified and as directed.
S & F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.
S & F as in repair cast iron floor trap 75mm dia outlet with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed.
S&F in repairs PVC waste pipe flexible 32mm dia for WHB complete all as specified and as directed.
S & F in repair hasp and staple of size 100mm mild steel safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S & F in repair 100mm butt hinges medium weight cold rolled mild steel including necessary welding work for fixing to mild steel/ iron door frame and fixed to shutter complete all as specified and as directed.
S&F in repair MS butt hinges medium weight cold rolled of size 75mm complete all as specified and as directed.
M & L for repair of broken projecting type/ box type hinges of steel window/ ventilators with and including new hinges fixed by welding incl matching with existing surface and easing the window for opening and closing complete all as specified and as directed.
S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality complete all as specified and as directed.
S&F as in repair 15mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F as in repair 15mm bore PTMT bib tap, any colour, high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed. Note : Min weight 90gms
S&F PVC water storage tank cover for capacity exc 250 ltr but not exc 500 ltr including driling holes for nut and bolts complete all as specified and as directed.
Demolition of PCC in roof covering. Kerbs, roof kerbs, benching, cover fillets etc including old decayed water proofing tratment of any type all as directed by Engineer - in charge.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into proper with WPC @ 3% weight of cement complete all as specified and directed. Note : WPC Shall be measured and paid seperately
M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair complete all as specified.
The surface shall be painted with one coat of polymeric primer @ 0.40 kg per sqm conforming to IS: 3384, A layer of 3 mm thick APP membrane (minimum weight not less 150 gms ) and upper side of membrane thermally insulated with white mineral finish uniformly embedded during manufacturing process. Side over lap shall be 75 mm and ends shall be 100 mm and all over lap and joints insert upto the ht 150 cm vertical surface imbeded in wall and finishing in CM 1:3 , embeding membrane into spout pipe, roof down ward facia and shall sealed by torch application with bitumen 30/40 grade, painetd with hot paving bitumen grade 30/40, confirming to IS -73 @ 1.20 kg per sqm over a coat of bitumen primer confirming to IS -3384 @ 0.30 Litre per sqm and all as specified Applicatiion of polymeric memberance shall be torch application all as per manufacturer instructions. Note : The above work shall be carried out through authorised applicator only
M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.
Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.
Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and directed.
Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed.
Taking down resecuring or easying and refixing in same opening of old door shutters of any description exc 1 Sqm but n exc 2 Sqm in size.
S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate
S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.
S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I complete all as directed
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate complete all as directed
S & F 150mm long mild steel pressed handles oval type stove enamelled black complete all as specified and as directed.
S & F 125mm long aluminium handles, cast type anodised complete all as specified and as directed.
S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and directed.
S & F 125mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S & F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with double pin and rubber shoe fixed in bottom of door shutter complete all as specified and directed.
S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
Supply only galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed
Supply only 4mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as directed
M & L Preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L two coats of synthetic enamel paint to steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of steel surfaces complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and directed.
M & L joint free coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L glazed coloured ceramic tiles 300x200x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.
M & L coloured glazed joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed
M & L coloured glazed joint free ceramic tiles 450x300x7 to 8mm thick in vertical surface as in skirting, dado etc and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles and including 10mm thick as in back coat in CM 1:4 complete all as specified and directed .
M&L for light shade full body vitrified ceramic tiles 8 to 9.5mm thick (square / rectangular) area of each tile n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for light shade full body vitrified ceramic tiles 8 to 9.5mm thick (square / rectangular) area of each tile n exc 0.36 sqm in vertical surfaces as in skirting, dado etc and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles and including 10mm thick as in back coat in CM 1:4 complete all as specified and directed .
Supply only liquid water proofing compound ISI marked complete all as specified and directed.
M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed.
Dismantling wrought iron or mild steel work or structural steel work of any description not otherwise specially provided for complete all as specified and directed.
S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming to IS 1161-1979 graded St-240 complete all as specified and directed.
Dismantling boarding plywood etc of any description and in any position fixed with nails etc complete all as specified and directed.
S & F 18 mm thick HDHMR (High density high moisture resistant ) Kitchen cupboard/door shutter one side white laminate and other side decorative as in modular kitchen/ cabinets/door shutter fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of pearlwood or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer,fixed to wall etc complete all as directed
S & F 8 mm thick HDHMR (High density high moisture resistant ) board of 'Pearlwood' or equivalent both side white laminate as in back of kitchen cabinets/partion of cupboard etc. complete all as specified and directed.
S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed. Make Nebco or equivalent
S & F stainless steel Auto clave hinge fancy type of approved make complete all as specified & directed. Make Nebco or equivalent
Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F in repair bib taps 15mm bore 2-in-1 cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F in repairs PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S&Fin repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including antisyphonage pipe complete all as specified.
S&F vitreous China white single piece WC (European type) incl inbuilt vitreous china cistern of size 360X640X680mm strap 220 all as specified and directed.
Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (pedestal pattern), white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and directed.
S&F in repairs vitreous china wash hand basin white flat back size 560 x470 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive waste pipe complete all as specified and directed. .
S&F brass CP health faucet 1.2m chain complete all as specified and directed.
S&F in repairs tower bolt Aluminum anodised of 125 mm long complete all as specified and directed.
S&F in repairs tower bolt Aluminum anodised of 200 mm long complete all as specified and directed.
S & F repair 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work all as specified.
S & F in repair 100 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall complete all as specified and directed.
,---ditto--- all as per srl item No 115 above but 75mm bore complete all as specified and directed.
S & F PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed.
S & F PVC (SWR) bends any radius of 75 mm bore complete all as specified and directed.
S&F in repair low density poly ethylene pipes (LDPE) of 32mm bore fixed to wash basins complete all as specified and directed.
S&F in Repair of galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples
Opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes/fittings for smooth flow of water from bib taps/showers/WHB pillar tap/stop valves complete by air pressure/water gravity pressure complete.
S&F 15mm bore CP pillar taps Fancy type cast copper alloy along screwed down high pressure with hot & cold with long screwed shanks and fly nuts screwed for GI pipe or brass ferrule complete all as specified and directed.
S&F in repair CP angle / stop cock fancy type 15 mm bore high pressure screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc fix complete all as specified and directed.
S&F in repairs peg set of three of mild steel bright finished, complete all as specified and directed.
Labour only resecuring existing pelmet boxes including provision of rawl plugs and steel Patti complete all as specified and directed.
M&L run welding in repairs, metal thickness n.exc 6mm complete all as specified and directed.
S&F in repairs stack clamps out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75mm bore pipes complete all as specified and directed.
S&F in repairs stack clamps out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100mm bore pipes complete all as specified and directed.
S&F in repairs toilet paper holder of mild steel chromium plated 'D' type fixed to walls with chromium plated brass screws complete all as specified and directed.
S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long complete all as specified and directed.
S&F in repairs 15mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and directed.
,---ditto-- all as per item No 132 above but 20mm bore complete all as specified and directed.
,---ditto-- all as per item No 132 above but 25mm bore complete all as specified and directed.
Screwing existing steel tubing 15mm bore for alternations or additions (or lengthening screw on pipe to from connector) in position without taking up/down complete all as specified and as directed
S&F in repair PVC Syphon kit assembly in existing flush tank complete all as specified and as directed
S&F PVC mirror cabinet of standard size complete all as specified and as directed
S&F in repair Corner Glass shelf assembly of size 300mm complete all as specified and as directed
S & F in repairs 65mm size brass 4 leaver mortice lock, vertical type complete all as specified and as directed
S & F in repairs 75mm size brass 4 leaver mortice lock, vertical type complete all as specified and as directed
S&F in repair Mild steel pressed handles, oval type stove enamelled black of size 125mm long complete all as specified and as directed
S & F in repair 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed
M & L cleaning of Nahani trap/Gully trap/Floor trap of any dia & removing silt/sludge & cleaning the blockage with water complete all as specified & directed. NOTE :- Quoted rates shall be inclusive of arrangement of mechanical instruments & water required. No extra shall be admissible on this account.
E/M Portion Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, scokets, fan regulators as required for one light point controlled by one switch complete all as specified and as directed
,---ditto--- all as per item No. 146 above but for one fan point controlled by one switch and regulator complete all as specified and as directed
,---ditto--- all as per item No. 146 above but for one light point controlled by two, two way switch complete all as specified and as directed
,---ditto--- all as per item No. 146 above but for socket outlet 6 Amps controlled by one switch on the same board with other swithces complete all as specified and as directed.
,---ditto--- all as per item No. 146 above but for socket outlet 6 Amps controlled by one switch on independent board.
,---ditto--- all as per item No. 146 above but for one bell point controlled by one bell push.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, sockets as required for one 16 Amps socket outlet point controlled by one switch on independent board complete all as specified and as directed
S&F angle holder, insulated polycarbonate body with back plate complete all as specified and as directed
S&F switch piano flush button single pole one way 6 Amp complete all as specified and as directed
S&F switch piano flush button single pole one way 16 Amp complete all as specified and as directed
S&F switch piano flush type, 16 Amp, single pole, two way complete all as specified and as directed
S&F bell push, flush type, 6 Amps 240 volts complete all as specified and as directed
S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type complete all as specified and as directed
S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type complete all as specified and as directed
S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and as directed
S&F ceiling rose 3 plates polycarbonate body complete all as specified and as directed
M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x 6.0 Sqmm + 1x6.0 Sqmm earth wire in 20mm dia conduit complete all as specified and as directed
M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point and including 15mm bore light grade G.I. protection pipe (upto 7.5 mtr from edge of the pit), PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.
S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways complete all as specified and as directed
S&F MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and as directed
,---ditto--- all as per item No. 165 above but double pole 10 to 32 Amps complete all as specified and as directed
S&F industrial LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 110 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 50000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make-Philips Cat part BN308C LED20S-6500 L120 PSU WH,Crompton Cat part CIS-305-40-57-SL-DP-NWH,Havells Cat no TOUTPLUS600BS20WLED840SPCWH
S&F LED fixture 10 watt having lumen output 100 lumens per watt including connection complete all as specified and as directed
S&F LED bulk head fitting 9 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified and as directed
Taking down MCB distribution boards with incoming and outgoing controls any make any capacity after disconnecting complete all as specified and as directed
Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete all as specified and as directed
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall build on cement mortar 1:4 including rendering in CM 1:4 and 2 coats of white/colour washing to match the surface complete.
S&F door bell AC 240 volts, single pole complete.
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles /stay/ cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil complete all as specified and as directed
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and as directed
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete. Note : punned thickness shall be measured
M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete
Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed.
S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminum conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm nominal cross section 4 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed.
S&F in replacement 10 watt LED T -lamp B-22 base (warm white/golden yellow) 1000 lumens, height 8.0 cm width 20.5 complete all as specified and directed.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket suitable for IP-44 degree for protection 20 Amps rating MCB complete all as specified and as directed
Taking down carefully existing exchaust fan 200 mm to 300 mm including all fittings and after B/R work refixing the same including fixing assesares complete.
Taking down fan /Exhaust fan, cealing cable end, dismantling blades and removing fan and blades to store and refixing after the reair and painting same complete all as specified and as directed
Painting of ceiling fans / Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.
Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete all as specified and as directed
Rewinding the motor of fresh air/exhaust fan 230/300 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.
Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete.
Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.
Taking down carefully existing water heater 25 litre capacity including all fittings and after tile/ plumbing work refixing the same including fixing assesares and hot and cold pipe 15 mm dia bore 450 mm long complete.
Opening up geyser of capacity 25/50 litre, checking defect, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / washers / gaskets / fusible plug etc wherever required and minor items not included separately in schedule. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).
Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25 litre capacity including rubber gasket, nuts / bolts etc complete.
Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 25 litre capacity geysers of any type as required.
Repair of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete all as specified and as directed
Supply only thermostat ISI marked suitable for 25 litres geysers as required.
Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.
Supply only dis cut out switch suitable for 25 litre capacity geysers ( make of geyser MARC) complete.
Supply only capillary thermostat set suitable for 25 litre capacity geysers ( make of geyser MARC) complete.
Renewal of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.
M&L for painting of geyser 25 litre with two coats of synthetic enamelled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete all as specified and as directed
Supply and fix in replacement LED luminary 35/36 watts bldg street light IP 66 5700K outdoor 110LM/W with standard accessories and making connection with 3 core 1.0 Sqmm PVC insulated multistranded copper conductor wire including fixing the same on GI bracket complete all as specified and as directed
Renewal of PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete all as specified and as directed
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
ANKIT BUILDERS
J.J.ENGINEERING
MSR INFRATECH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .