CGF 2025-2026

Amount

Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.

a). Narrow foundation

b). Open Exacavation

Supply delivery and filling of msand river sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incuding all incidental changes etc., complete as per standard specification

Plain Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification

Steel centering for side and sifits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings ing mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification.

A) Column

B) Grade beam

C) Beam &slab

Supplying fabricating and placing in position of steel rods using TMT Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/cum and maximum water cement ratio of 0.55 Including admixture (Plasticiser/super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10-12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying. vibrating with mechanical vibrators, finishing curing, etc and providing fixtures like fan clamps in the RCC floor roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as

a) Foundation & Basement

b) Ground Floor

c) First Floor

Brick Work in Cement Mortor 1:5 Mix (one cement, five M sand) using new best quality fly ash Bricks of size 23x11x7cm for foundation and basment including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

a) Foundation & Basement

A). Ground floor

B). First floor

Collection Supply and Filling of well gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification

Special Ceiling Plastering in cement motor 1:3 mix (one cement, three sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plain Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Stainless Steel ( Salem Stainles Steel ) dorr frame (Box Section using stainless steel plate of 1.6mm thick) of size 100mmx60mm with a rebate of 30-35mmx15mm on one side of the frame including supplying and fixing dovetail splayed and stainless steel hold fast etc/ (PWD SOR-M-0400)

Providing of 35mm thick factory made prelaminated ABS ( Acrolynitrile Butadiene Stuyrene ) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 X 32mm. Reinforced by 32 X32mm -2 Nos., for vertical made out of LVL ( Laminated Veneer Lumber).. Core material of 32mm thick high density craft paper honey comb board. sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm PVC edge banding of size 0.45mm on the vertical sides/ Hardware made out of steel coated butterfly hinges-3Nos., for each shutter and ISI make SS round lock complete for finished item of work. ccomplete complying with the standardspecification/ The door shutter and frame should be gotapproved from the Executive Engineer before use on work (PWD SOR Unicode: M-0677)

Providing of 35mm thick factory made prelaminated ABS ( Acrolynitrile Butadiene Stuyrene ) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 X 32mm. Reinforced by 32 X32mm -2 Nos., for vertical made out of LVL ( Laminated Veneer Lumber).. Core material of 32mm thick high density craft paper honey comb board. sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm PVC edge banding of size 0.45mm on the vertical sides/ Hardware made out of steel coated butterfly hinges-3Nos., for each shutter and ISI make SS round lock complete for finished item of work. ccomplete complying with the standardspecification/ The door shutter and frame should be gotapproved from the Executive Engineer before use on work (PWD SOR Unicode: M-0677)

Providing of 35mm thick factory made prelaminated ABS ( Acrolynitrile Butadiene Stuyrene ) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 X 32mm. Reinforced by 32 X32mm -2 Nos., for vertical made out of LVL ( Laminated Veneer Lumber).. Core material of 32mm thick high density craft paper honey comb board. sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm PVC edge banding of size 0.45mm on the vertical sides/ Hardware made out of steel coated butterfly hinges-3Nos., for each shutter and ISI make SS round lock complete for finished item of work. ccomplete complying with the standardspecification/ The door shutter and frame should be gotapproved from the Executive Engineer before use on work (PWD SOR Unicode: M-0677)

Supplying fabricating and placing in position of steel rods using TMT Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Manufacturing, Supplying and fixing of Stainies 6530 Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1:50mm thick at required locations to a height of 300mm fom finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2. Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm Ms base piate encased in the base concrete. The rate a inclusive of the charges for cutting, bendeg electricar welding, grinding polishing conveyances charges, etc complete (PWD SOR-M-0651)

Supplying And fixing in Position White / Colour G;azed Model Floor Mounted European Water Closet of best quality and approved make with 100mm "P" or "S" trap coProwding UPVC (U-Plasted Pyy Chande Ventilator Ventilator Providing and fing casement doors fabncated from un plastica ande sections Profies The profles should be three thanber systers stich provides high insulation properties we ame 60mm 65mm with an outer walichos 24mm The window unit should be designed with all comer joints mitred and fusion wed Windows should be serced 25x24x25mm steel reinhurtement with a thickness of tom to have dimensional stability The sau should be of 60x102mm The mul should be of 1074mm. The proflies should have co extruded analis Hardware At the hardware the fiction stays, handles shoutt be screwed with set tapoing screws The handlesticks should be designed so that they cannot be missed t Gang The window system should be giared with 5rm plan fotbol Imitatution: The proties should be cut tong and welded 45 degrees. The window shout be

Paving the floor with design Ants comic colour and shade as directed) of size 305 m 306mm x 6 mm in all fifcorns over a basa layer of cement mortar 13 (One part of Coment and Three part of Plastening Sand (P. Sand) , 20mm thick laid in-situ and pohled with same coloured cement

Paving the floor with pre-so Con The step ties (Required shape and deeg of SA 20mm thick of approved qually and curlourin Cement Mortar 13 (One part of Cement and Three part of P 1 of Plastering Sand Sand - Santi 20 thick and pointed with white cement mixed with colouring pigment at the rate of 0. 40 Kgram. ngem sq.m., curing. etc., complete complying with standard with specification and directed by the departmental officers.

mying anit ant fling in posthun White Colour 5073.80 et Mode Floo Floor Mounted Eumpean Water Closet of bent quay y and approved make with tap connecting with C pipe of 100mm of p da PVC 100mm da VC pipe of 110mm dia doubl git PVC tlack seat and seat cover with CP brass hingee induding cost of white coment pating, lapan yam teak wood pla et including supplying and freing Пет сарасл PVC 125 Rees capacity porcelain low leve level lasting tank with a par of C comprete te with al fittings brokkarte etc. co time ball valve with polythene float with brass hande, une coupling connected by means of 40mm whine PVC flush hand using indian adopter joint including all erlerna tings, such as 10mm bras connections, 15mm GM whe asse (2 Nos 15mm nybe casection TW plugs, so con plugs, screws and als ging алу cоплясn to the PVC pipe and pointing the Ct brackets with 2 costs of approved nover one cost of rec axe pomer demantling the masonry and re-doing the dumantted mesorry te anginal conditione into comprying with standard spettons [The WC and flushing tank with ut accекзоти should be got approved by the Executive Engineer lelure use on worked Floor Fitting (PWD SOR-M

Dadooing walls with ceramic tiles of sizes 300mm X 450mm X8mm size of approvell make an y and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P Sand) over 10 mm base layer plastering and ponting with white cement neatly as directed

Paving the floor with Double charged Vitrified tries of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary piaster of paris. putty, wherever required etc, complete as per standard specification

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc, complete, in all floors.

Supply and Fixing in Position of SFRC Manhole cover 600mm x 600mm including all cost and conveyance etc., complete. (M-0714)

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 23)

Wiring with 2 x 1.5 sqm(22/0.3) insuheathed Sc Cu Conductor of 1100V grade in suitable PVC ngid pipe concealed in wall and celing with PVC accessories with TW switch box and SA FT switch in flush with wall 150 x 100 x 113 mm TW switch Box for 5A 3 pin non inter locking CS plug with continous earth wire connection of 14 SWG TC wire and making good of the concealed. portion with suitable colour for concealed PVC plug point (SD 36)

Wiring with 2 x 4 sq mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power plug point (SD 40)

Supply and fixing of single box type 440W fluorescent fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting (SD 68)

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1meter down rod on the existing clamp. (SD-107)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. Gl pipe (class B) with 1 no 32 mm Gl bend complete on the existing post on wall with PVC unsheathed copper leads with MS clamps and with painting (SD 448)

Supply and fixing of TNEB meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work of size 2feet x1-1/2 feet using angle iron of size 1-1/2" x 1-1/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x % feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos 63A fuse units (500V), 1No neutral link, copper earth flat of size 1"x1/4" with interconnection of EB meter to fuse units by 16 Sq mm PVC insulated copper wire with No 83Amp 30MA Four Pole RCD/RCCB (Higher End) with suitable necessary connection with earth connection complete (SD 131)

Supply and laying of 31/2 x 25 sqmm pvc armoured LTUG Cable in a french to be excavated at a depth of 0.75m putting 0.150 layer of sand and covering the cable completely (SD-200)

Providing & fixing PVC RAIN WATER 5 DOWNFALL PIPE of the following dia with necessary T.W Clamps Plugs, Shoes, Bends. other clamps, screws nails etc complete complying with standard specification The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed 110mm dia PVC Pipe (4 Kg/SqCm] etc. complete as per standard specification

Supplying and fixing in position best quality P.V.C soil/waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including foxing to the wall with PVC/MS clamps etc. and making connection to all sanitary fittings dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications

a) 110mm Dia PVC Pipe

bj. 90mm Dia PVC Pipe

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type) with LSLmark of the following sizes including cost of Shellac thread etc, including labour for cutting and threading of GIPipes elc complete complying with standard specifications for both internal and external water Supply arrangements

a) 20mm Dia

b) 25mm Dia

c) 32mm Dia

Suppling and fixing in position 15mm diameter brass/C.P screw down tap/pillar tap/swan neck tap (heavy duty) of approved make conforming to 1.5 specifications and quality including cost of shellac, thread etc. complying with standard specifications and including cutting and threadingwherever necessary

a) SD Tap

b) Pillar Tap

c) CP Two Way Bib Cock with Health Faucet

Supplying and foxing in position indian make bewelled edge marrot of approved quality and brand of size 600 X 450mm with necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc complete complying with standard specifications

Supplying and fixing best approved quality Brass CP Al anodised Towel rail 600mm long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P. Screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications

Supplying and fixing in position PVC specials such as plain bend, door bend, plain tee, door tee offsets Y-junction, plain or with door of various sizes best quality confirming to 18 S and providing leakproof joints including fixing to wall and giving connection to the PVC, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to onginal condition etc complete complying with standard specifications

a) 110mm Dia PVC. Plain Elbow

b)90 mm Dia PVC. Plain Elbow

c)110 mm Dia PVC. Plain Tee

d)90 mm Dia PVC. Plain Tee

f) 110mm Dia PVC.Door Elbow

g) 90mm da PVC. Door Etow

f) 110mm Dia PVC.Door Tee

g) 90mm da PVC. Door Tee

Feng i postion PVC Y union with Plan of with coor of various ses of bent approved-quality contemng le 155 and pitivding we proof jotits with CM12 (one cement two wandi spun yam etc. to wal and giving connection the PVC sal stacks demanding the brok ROC Apar or Roof slap and recoing me damanded portion to orginal condition nctuding painting the PVC specials two coals with best soproved quality and-comotive panta somplete complying with stondent speccatione

a). PVC Y wth door 110mm dia

b). PVC Y with door 90mm dia

Supplying and ang fixingpostion best quality approved made white glazed earhenware wash hand boun of sice 550 x 400 mm win a prof ast con crachets, including cost of Sametre truss chromium placard pilar tape 32 CP Walle union 12 PVC waste arpe with rubber plug and chan 15mm diamet G.Mwheel valve, meta nape mm da no sunctions etc ng foong the wash han and screws and giving neary coction and paning the backw including teating ha tackage comp complying with slaridant speutcators

Supplying and fixing in position of the following CPVC specials of heavy type and approved quality and good variety excluding fixing charges complying with standard specification. Fixing charges included in the pipe laying work (The CPVC specials should be got approved by the Executive Engineer concerned before use on works)

Elbow

32mm dia

25mm dia

20mm dia

32mm dia

25mm dia

20mm dia

25mm dia

20mm dia

Coupling

32mm dia

25mm dia

20mm dia

Union

32mm dia

25mm dia

20mm dia

Nipple

32mm dia

25mm dia

Internal Water Supply-CPVC Pipes (6Kg/SqCm) Supplying laying and jointing PVC pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak Wood Plugs, PVC Clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portions to onginal condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

a). 20mm Dia CPVC Pipe

b) 25mm Dia CPVC Pipe

c) 32mm Dia CPVC Pipe

Geophysical Investigation charges including preparation of geophysical report as per TWAD Board type circular including all cost of transportation and handling charges etc. complete

Supply and delivery of 150mm (CS) 6KSC pvc

Drilling of 150mm(6") dia Vertical clear bores in Hard rock in any habitation any where in Salem District to any required depth as directed by the officers concerened including labour charges for inserting M.S/P.V.C Casing pipes to any reauired depth assembilling in the drilled hole including welding joints if necessary Grouting the cassing pipes including conducting proper yield test at final depath (by provinding 90 V Notch fitted in a formed channel and the correct yield at the time of free flow in the channel while flushing the bore after completion of drilling process should be ascertained of and reported )including Bore cover transportation crew and fuel charges for rigs and supporting Vechicles from one place to another etc Complete and as directed by officers Concerned

upto 150m Below Ground Level

from 151m upto 180m

from 181m upto 210m

Supply and delivery of 4.00sqmm flat type PVC insulated 3core copper cable confirming to IS694/1990 with ISI Marking suitable for submersible pump set etc complete

Supply and delivery of following pipeline materials from approved company including all cost and conveyance etc complete

50mm G1 "m" Class pipe IS 1239/Part 1/90

50mm G.I "m" Class pipe IS 1239/Part 1/90

65mm Gun Metal Gate Valve

Borewell Dummy

Borewell pipe M.S Clamp

50 mm coupling

50 mm NRV

50 MM GI ELBOW

50 MM GI NIPPLE 0.60 M

50 MM GI NIPPLE 0.30 M

50 MM GI NIPPLE 0.15 M

50 mm Gl union

50mm Gì Hex nipple

wooden board

100 ams fuse unit

25 mm PVC pipe

25 mm PVC bend

63 mm PVC pipe

63 mm PVC elbow

63 mm PVC Tee

2000 Liter HDPE Tank

Supply and delivery of MS Kiosk of size 0.75m x 901 0.46m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 10 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting welding, granding, locking arrangements and labour charges etc

Earth work excavation and deposting on bank with 177 Initial lead of tom and initial lift of 2meters in hord soff clay, stiff black cotton, hond red earth, shales muttam, gravel, stoney earth and earth mixed with mall small size of boulders as per 50 20 B for

Laying of G.I. and PVC Pipes and specials to proper line and levelincluding jointing but excluding cost of pipes and jointing materials for plumbing works for providing water supply and sanitary works in the premises

Labour charge for refilling with gravel in earth work portion including conveyance and all other charges

Labour charges for the erection of submersible pump set in bore well including fixing and joint submersible cable with proper clamps upto stater to require depth and also fixing of raiser pipes to the required depth valve erection clamp pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter Voltmeter Ammeter, three pilot(indicating) lamps capacitor single phase preventor, water level guard and laying and jointing the cable and twin earthing as per IS rules etc complete.

SSS CONSTRUCTION (BID ID -1344063)