HMI/RNM/CONTRACT/13/19-20

Amount

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete in parapet including necessary scaffolding.

Demolition of cement concrete reinforced as in chullah hoods, shelves and plate form etc complete all as specified and directed

Dismantling of false ceiling of any description, any thickness including cover fillets and frame work complete all as specified.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for half brick thick work built in cement mortar 1 : 4 by using sub class "B" brick.

M&L for RCC platform, shelves type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified

M&L for form work to sides and soffits of floor or roof beam lintels, cantilevers, shelves including supports etc.

S&F MS TMT bar 10 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.

Demolition of cement concrete in sunken flooring in toilet of any description and removing waste material out of defence land etc complete all as specified and directed.

M&L cement concrete (1:4:8) type D-2 using 40mm graded stone agregate as in foundation filling and mass concrete complete all as specified and directed.

M&L cement concrete (1:2:4) Type B-0 using 12.5 mm graded stone agregate as in surface channel, PCC padding, copping and drain including necessary form work etc complete all as specified and directed.

M&L cement concrete (1:2:4) Type B-1 using 20 mm graded stone agregate as in floor etc complete all as specified and directed.

Bitumen blown in any grade, applied hot, two coats, to concrete surfaces @ 1.5 kg per sqm per coat.

M&L cinders filling in sunken floor in toilet.

M&L for forming jambs in Cement mortar 1:4 to openings (to foregoing item) including cutting, toothing and properly bonding into old work. also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete.

M&L for Rendering 20 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed . The rate for scaffolding is inclusive. NOTE: water proofing compound shall be measured and paid seperately

Supply only water proofing compound (liquid),ISI marked. Make : Dr Fixt

Material and labour for two coats of Apex weather proof ultima asian paint over a one coat of smart care damp proof primer (1 st quality ) Asian paint after removal of previous coat from brick/stone/concrete . All as specified and directed by Campus Supdt Note : Rate should be including of one coat of primer, two coat of Apex and Scaffolding.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified.

M&L for 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall tiles complete all as specified.

M&L for glazed coloured tiles (digital pattern) including highlighter (450x300x7mm thick to 350x275x7 mm thick) in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces. Make : Somany/Johnson/Kajaria

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles as dierected.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete. Make -Somany/Johnson/Kajaria

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles as dierected.

M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished ) in steps, floors, jambs, pillar, window cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L for anodised aluminium/GI snap grid frame work with supporting hangers comprising of GI wire 4 mm dia with J hook, nuts/bolts etc for false ceiling with size of grid 605 x 605 mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg per RM and wall angle 23.5 x 26.4 x 1.4 mm weighing 0.191 Kg per RM respectively complete all as specified and directed.

M&L for 6 mm thick E-board false ceiling of size 600 x 600mm fixed to aluminium/GI snap grid frame work as in ceiling flat or sloping conforming to IS -14862 complete all as specified & directed. Make Everest

Supply and fix in repairs of vitreous china wash down closet water closet pan (Pedestal pattern) single piece WC including UF soft closing slim seat cover, closed pattern with flat bottom and cover aluminium, Accessories set size 380x660x765mm 'P' or 'S' trap 110mm including 10 litres capacity flushing cistern with cistrn fitting for pan. Note : P or S trap one of them should be fitted with pan all as directed by campus Supdt. Make : Jaquar/Somany/Marc/Hindware

Supply and fix in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest PVC 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete. Jaquar/Somany/Marc/Hindware

Supply and fix in repairs 10 ltr, white PVC valve less syphonic action type flushing cisterns low level , with inlet connections, ball valve, float valve and handle including brackets and connection to pipe complete all as specified. Jaquar/Somany/Marc/Hindware

Supply and fix under counter basin with fixing accessories set of size 595x400x195mm shape of oval including all fittings and fixtures all as directed by manufacturer instruction. Make : Jaquar/Somany/Marc/Hindware

S&F chromium plated central hole basin mixer for hot and cold water with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete. Make - Cera/Jaquar/Hindware/Somany/Marc

S&F in repairs PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. Make -Jaquar/Cera/Hindware/Somany/Marc

S&F in repair CP 15mm bib tap fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make -Jaquar/Cera/Hindware/Somany/Marc

S&F two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make : Cera/Jaquar/Hindware/Somany/Marc

Supply and fix in repair health faucet with all connected accessories. Make Jaquar/Hindware/Cera/Marc/Somany

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make Jaquar/Hindware/Cera/Marc/Somany

S&F in repair Stop cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make Jaquar/Hindware/Cera/Marc/Somany

Supply and fix wall mixer non telephonic shower arrangement with connecting legs and wall flanges all as specified and directed by manufacturer instruction Make : Jaquar/Somany/Marc/Hindware

Supply and fix 15mm dia stop cock for exposed part kit of concealed stock cock and flush clock with fittings sleeve operating lever and adjustable wall flange with seal all as directed with manufacturer instruction Make : Jaquar/Somany/Marc/Hindware

S&F towel rail 600 mm long of CP fixed with and including chromium plated brass screwed and wooden/plastic cleats all as specified. Make : Jaquar/Somany/Marc/Hindware

Supply and fix in repairs stainless steel soap dish holder all as specified and directed by Manufacturer instruction. Make : Jaquar/Somany/Marc/Hindware

Supply and fix corner glass shelf with bracket all as specified and directed by manufacturer instruction Make : Jaquar/Somany/Marc/Hindware

Taking up or down steel tubing 15 mm dia with all fittings and fixtures, cleaning the pipes and refixing in new or old position complete all as directed.

Taking up or down steel tubing 20 mm dia with all fittings and fixtures, cleaning the pipes and refixing in new or old position complete all as directed.

Taking up or down steel tubing 25 mm dia with all fittings and fixtures, cleaning the pipes and refixing in new or old position complete all as directed.

Taking up or down solar water steel/UPVC tubing 15mm/20/25 mm dia with all fittings and fixtures, cleaning the pipes and refixing in new or old position complete all as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred

Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed to wall, ceiling, floor etc including all necessary fittings like elbow, tee, union, socket etc of 15mm dia bore.

Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed to wall, ceiling, floor etc including all necessary fittings like elbow, tee, union, socket etc of 20 mm dia bore.

Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed to wall, ceiling, floor etc including all necessary fittings like elbow, tee, union, socket etc of 25mm dia bore.

Taking down CI / PVC (SWR) pipes of any size or pattern including all fitting fixed to wall, floors, etc all as specified

S&F PVC (SWR) 75 / 100 mm bore floor trap with grating including jointing with solvent cement complete incl taking down existing trap all as specified. Make : Finolex/Supreme

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints, fixed to wall etc

Supply and fix unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed with wash hand basin as in floor, wall with clamp etc including all necessary fittings like elbow, tee, union, socket etc of 40-50 mm dia bore.

S&F 100mm dia stack clamps out of 50mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified

S&F PVC (SWR) 110 mm bore bends of any radius with door/without door.

S&F PVC (SWR) 110 mm bore WC connector bent type

S&F PVC (SWR) 110 mm bore branch piece, single (single Y) equal or unequal.

S&F PVC (SWR) 110 mm bore branch piece, doube (doube Y) equal or unequal.

S&F PVC (SWR) 110 mm PVC junction single (Single 'T') equal or unequal complete.

S&F PVC (SWR) 110 mm PVC junction double (double 'T') equal or unequal complete.

S&F PVC (SWR) 110 mm bore coupler.

S&F PVC (SWR) 75/110 mm bore reducer

S&F PVC (SWR) vent cowl 75 mm bore

S&F PVC (SWR) 75 mm bore bends of any radius with door/without door.

S&F in repair grating doom 100 mm dia with waste hole of chromium plated.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F 28 to 30 mm (stiles) Factory Made Solid PVC Moulded door shutter with wood free EPS, with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification and drawing complete all as specified and directed. Make : Raj shree, Sintex.

S & F 100 mm size Butt hinges extruded brass with mild steel hinge pin bright polish and fixed type B-11

S & F brass barrel tower bolts of extruded section and fixed 200 mm long.

S & F brass handles of extruded section, fabricated type and fixed 125 mm long.

S&F brass sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F for anodised aluminium window three track sliding type with frames including 5mm thick tinted glass, stainless steel wire cloath 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with standard rubber gasket, aluminium beadings and joining cleat for fixing including locking devices complete all as specified. Make : Jindal aluminium sections Nos. 20671, 20672, 20690 & 20668

S&F aluminium anodised grill in one piece, 7.5mm thick having anodised thickness 15 micron fixed to grill and window frames with putty/rivets/screws 75mm clear spacing all as directed by Campus Supdt

Supply and fix Aluminium louvers window bottam glass fix and balance glass adjustable with proper section of jindal all as specified and directed.

M&L for applying two to three mm coat of Birla/ JK wall putty & preparation of surfaces for further treatment and after prepration of surfaces, applying two coats of oil bound distemper over & including a coat of primer on new sufaces complete all as specified and directed.

M&L for one coat of OBD on old decorative surfaces of ceiling incldg preparation

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) completete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, lights fitting etc remiving materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floor etc

Material and labour for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 volts drawn through and including rigid non metallic surface conduit medium grade ISI marked minimum 20mm dia and its accessories complete alongwith 1.5 Sqmm cable but in green colour as continuous earthing wire and connnecting to common earth duy completely concealed. Surface in walls/ceiling roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations, fan regulators etc, as required with 3mm thick plastic laminated sheet top cover all as specified and directed for the following points. One light point controlled by one switch

Material and labour for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 volts drawn through and including rigid non metallic surface conduit medium grade ISI marked minimum 20mm dia and its accessories complete alongwith 1.5 Sqmm cable but in green colour as continuous earthing wire and connnecting to common earth duy completely concealed. Surface in walls/ceiling roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations, fan regulators etc, as required with 3mm thick plastic laminated sheet top cover all as specified and directed for the following points. One ceiling /exhaust fan point controlled by one switch

Material and labour for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 volts drawn through and including rigid non metallic surface conduit medium grade ISI marked minimum 20mm dia and its accessories complete alongwith 1.5 Sqmm cable but in green colour as continuous earthing wire and connnecting to common earth duy completely concealed. Surface in walls/ceiling roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations, fan regulators etc, as required with 3mm thick plastic laminated sheet top cover all as specified and directed for the following points. One three pin socket out let 5 Amp on independents board complete

Material and labour for point wiring with 4.00 sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 volts drawn through and including rigid non metallic surface conduit medium grade ISI marked minimum 20mm size and its accessories complete alongwith 4.00 sqmm cable but in green colour as continuous earthing wire and connnecting to common earth duly completely concealed. surface in walls/ceiling roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for one 3 pin socket out let 15 Amps on independent board with 3mm thick plastic laminated sheet top cover all as specified and directed Note : Necessary PVC, rigid, concealed type junction boxes for identifying junction as required on site directed by Campus Supdt for point wiring with PVC dummy plates shall to be included in quoted.

Supply and fix modular switch 1 way 6 Amp, 240 Volt. Make : Anchor/Havells

Material and labour ceiling rose surface type bakelite 65x50mm with three terminals complete all as directed.

Supply and fix modular socket outlet 6A 2/3 Pin complete all as directed.

Supply and fix modular socket outlet 16A 2/3 pin complete all as directed.

Supply and fix modular white cover plate with frame 6 module or as per ground reqmt complete all as directed.

Supply and fix modular white cover plate with frame 1 module or as per ground reqmt complete all as directed.

Supply and fix LED holder for 9 watt complete all as directed.

Supply and fix LED tube light fittings 1x20w 230V energy efficient fittings decorative type complete including housing all pre wired with high efficiency electronic driver complete fixed to wall/ceiling including connection by flexible PVC cable with standred copper conductor from ceiling rose to connector of the fittings including LED tube complete all as specified and directed. Make : Havells / Bajaj / Syska

Taking down existing hot water geyser of any capacity and refixing in same position including necessary clamp complete all as directed.

Supply and fix sheet factory made, powder coated MCB DB with bus bar 200 Amps Neutral link, earth bar, double door SPN 8 way 230 Volts all as directed. Make Havells/Legrand

Supply and fix miniature circuit breaker (MCBs) MCCB of following capacity (a) MCB Single pole 240 Volts 6-32 Amps. Make Havells/Legrand

Supply and fix miniature circuit breaker (MCBs) MCCB of following capacity (b) MCB SPN 240 Volts 0-32 Amps. Make Havells/Legrand

Supply and fix LED bulb for 9 watt complete all as directed. Make : Havells/Syska

Supply and fix exhaust fan with for protection when not in use silent operation rust proof body and blades with fixing arrangements of size 300mm seeep 1400 rpm including cutting and preparation of hole in brick wall and plaster complete . Make : Havells/Bajaj

BHUWAN BHAKTARAJ PRADHAN

MANOJ GURUNG