Erection of 220 volt O.H. line damaged of pole and conductor lighting arrangement along with along with 7,8 UG to 4,5 UG transporting road under CCD GM Unit Dhori Area.

Amount

Supply of cement pole.

Erection of metallic pole of length concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required (above 10.00 metre and up to 12.00metre) pole supply by department

Transporting of pole factory to working site

Providing of LED light fitting (Departmental supply)

Erection of ACSR conductor 7/3.35 mm including binding etc. as required. 45mtr x 15 span = 675 x 2wire = 1350mtr x 0.214kg. =288.90 kg

Supplying and fixing 32mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent /HPMV /HPSV street light fitting on pole including bending the pole to required shape 2nos 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supply and erection of Stay set complete ( glavnised ) with 19/20 mm dia x 1.8 mtr long stay rod , anchor plate of size 45 cm x 45 cm x 7.5mm, thimble , stay clamps ,turn buckle ( 20mm x 60 cm ) 7/3.15. mm dia GI stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required .

Supply of 6 SWG. G.I. wire. For cradle.

Erection of cradle guard as required1spen 22nos x 7spen =154 nos

Providing and fixing following capacity TP&N disconnect or fuse switch unit inside the existing cubicle panel board with ISI marked HRC fuse including drilling holes in cubicle panel making connection etc. 63amps TP&N

Supplying and erection of 100 mm x 110 mm shackle insulator with GI bolts nuts and straps etc as required

Supplying and erection of 100 mm x 80 mm pin insulator complete with GI spindle and nuts as required

Supply of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finish paint as required .

Fitting and fixing of LED 50watt light fitting on pole

Erection of angle iron / channel iron cross arm on wood /RCC/PCC steel tubular / rail pole. etc as required.

Providing and clamp, bolts , nuts , etc

Supplying and drawing following Sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required. 2x4sqmm

Dismantling of pole/ street light standard / strut embedded in cement concrete foundation etc. as required.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES

M/S SHIV PARBATI ENTERPRISES