CERTAIN PETTY REPAIR AND REPLACEMENT OF INTERNAL WIRING, MCBS DBS FITTING, FIXTURE, SUB MAIN AND OTHER CONNECTED WORKS AND OTHER MISC UNDER GE (WEST) JABALPUR

Amount

Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.

S&F in repairs Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 20 mm dia with all conduit accessories and one run of 2.5 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed. Note : - Two run of 4 Sqmm & one run of 2.5 Sqmm cable shall be measured as one unit run.

S&F in repairs Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 4 Sqmm cable shall be measured as one unit run.

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLS cable 1100 Volts grade drawn into and concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge. (a) One light/ Fan / Bell Point controlled by one switch.

(b) One socket point 5 Amp controlled by one switch on same board.

(c) One socket point 5 Amp controlled by one switch on Independent board.

(d) One light point controlled by two way switch.

Description same all as per item No. 4 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 1.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge.

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLS cable 1100 Volts grade drawn into the existing conduits including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahssrs and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge. (a) One light/ Fan / Bell Point controlled by one switch.

(b) One socket point 5 Amp controlled by one switch on same board.

(c) One socket point 5 Amp controlled by one switch on Independent board.

(d) One light point controlled by two way switch.

Description same all as per item No. 9 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 1.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge.

M&L for drawing the wire in with casing caping complete with point wiring with FRLSH PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover or inner outer plates for modular switches with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed (a) One light/ Fan / Bell Point controlled by one switch.

(b) One 3 pin socket out let, 6 amps on the "same board" with other switches

(c) One 3 pin socket outlet, 6 Amp on “independent board”

(d) do but one light point controlled by two way switch

Ditto all as per item No. 14 here in above but drawing in with casing caping point wiring using 2.5 Sqmm (Nominal area)triple layer FRLSH PVC insulated unsheathed copper conductor 1100 volts for one 3/6 pin socket outlet ,suitable for 6/16 amps on “independent board”.with 1.5 sqmm with one single run copper wire as continuous earth wire to common earth dolly complete.

S&F call bell ding dong sound type suitable for AC 240 volt single pole complete all as specified & directed. Make anchor

S&F switch bell push flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified & directed.

S&F switch flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified & directed.

S&F socket outlet 2 in 1, 5 Pin 5 Amp flush type of polycarbonate body complete all as specified & directed.

S&F Switch socket combination 2 in 1, 3 pin / 5 Amp and 15 Amps flush type universal of polycabonate body complete all as specified & directed.

S&F lamp holder / batten or angle holder Insulated body incl 9 w LED bulb with back plate suitable for batten fittings complete all as specified & directed

S&F Ceiling rose surface type 60x30 mm three terminals of polycarbonate body complete all as specified & directed.

S&F Ceiling Fan regulator electronic type 280 Watt capacity of ploycarbonate body ISI marked complete all as specified & directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Make : Philips Cat part BN 021 LED 22S 6500/4000 PSU GR SI or equivalent in BAJAJ,Havells

S & F LED Mirror light fitting 2 ft TL 5 12 watt complete with fixing arrangements on wall all as specified and directed.Make- PHILIPS Cat part no:BN 021 LED 12S 6500/4000 PSU GR SI or equivalent Bajaj,Havells

S & F recess mounted adjustable LED downlighter not less than 12watt 400 lm, 3000K/6500K complete all as specified and as directed.Make- PHILIPS Cat part no:LED SPOT GU10 4.6 W or equivalent ,BAJAJ,Havells

S&F decorative wall light fitting made up of Polycarbonate ,Cylindrical shape ,with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. Make: CITY 1 OF HAVELLS or equivalent in Bajaj/Philips

S & F LED spot light not less than 4 watt 400 lm, 3000K/6500K complete all as specified and as directed.Make- Havells Cat part no:sparkleproadjdlr12w830mod40dwhtneem or equivalent ,BAJAJ,Havells

S&F Bulk head endura LED light fitting complete 10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size and accessories & length complete all as specified & directed. Make :Havells Cat Part No. RUGBY NEONFT10WLED760SSYMBOPC or Equivalent make Philips / BAJAJ

S&F LED light fitting square 57x57 CM Not less than 40 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in Bajaj/Havells

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make : Legrand /Schneider Semens

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make : Legrand /Schneider Semens

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 12 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make: Legrand /Schneider Semens

S&F in replacement sheet metal enclosure MCB DB double door [Acrylic], Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make : Legrand /Schneider Semens

S&F in replacement MCB Triple Pole and Neutral 63 Amps,10KA breaking capacity complete all as specified & directed.Make: Legrand /Schneider/ Semens

S&F in replacement MCB Single Pole and Neutral 240Volt, 40 Amps,10KA breaking capacity complete all as specified & directed.Make: Legrand /Schneider/ Semens

S&F in replacement MCB Single Pole and Neutral 240Volt, 63 Amps,10KA breaking capacity complete all as specified & directed.Make: Legrand /Schneider / Semens

S&F in replacement MCB Single Pole 240Volt, 6 to 32Amps,10KA breaking capacity complete all as specified & directed.Make:Legrand /Schneider/ HPL

S&F in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathed of PVC tape and over all PVC sheathed in service connection, one twin core 6 Sqmm stranded aluminium conductor cable flat or circular complete all as specified and directed.

S&F in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathed of PVC tape and over all PVC sheathed in service connection, one twin core 4 Sqmm stranded aluminium conductor cable flat or circular complete all as specified and directed.

S&F in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathed of PVC tape and over all PVC sheathed in service connection, one twin core 10 Sqmm stranded aluminium conductor cable flat or circular complete all as specified and directed.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in philips/ bajaj/wipro/ Suriya

Supply & fix in replacement of LED Security Light Luminaire 40 -45 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: ENDURAPEARLOSL45WLED757PASYT or equivalent in philips /obajaj/ wipro/ Suriya

Supply & fixing in repair LED light down lighter by recess or surface mounted 8 to 12 watt with fixing arrangemnts on ceiling with steel chain complete all as specified & directed.

Supply & fixing in repair LED 20 watt tubelight high efficiency linear polycarbonate type single side connection complete all as specified & directed.Make: Philips /Havells/ Bajaj.

Supply & fixing in repair for Electronic Ballast suitable for 36 Watt, 240 Volt light fittings complete all as specified & directed.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. Make :- Legrand/ Havells/ Anchor

S&F in replacement plug top 3 pin, 5 Amps complete all as specified and as directed.

S&F in replacement plug top 3 pin, 15 Amps complete all as specified and as directed.

S&F in replacement switch piano type two ways AC 230 volts 6 Amps as per on existing switch board .

S&F in replacement roter type Bipin holder of any size/shape as required at site for 12/20/28/36/40 watts tube light 240 Volts complete all as specified and as directed.

S&F in replacement LED out door drivers 230 V , 25W to 60W suitable for security light, ceiling light reqd as per site including taking down and refixing at site complete all as specified and as directed.

S&F in replacement PVC casing caping 25mm as required at site complete with fixing nails and making good the disturbed surfaces etc complete all as specified.

S&F in replacement PVC conduit 25mm medium gradeas required at site for passing through submains complete with all fittings such as tee, bends,elbow, saddle etc and making good the disturbed surfaces etc (Cutting , chasing,finishing shall be included in this Item complete all as specified.

S&F in replacement PVC rectangular block for mounting switches, sockets, fan regulator etc 3mm thick plastic laminated sheet cover of size 100mm x 100mm and 50mm deep complete all as specified and as directed.

S&F in replacement of PVC rectangular block for mounting switches, sockets, fan regulator etc 3mm thick plastic laminated sheet cover of size 175mm x 100mm x 50mm deep complete all as specified and as directed.

S&F in replacement of 3mm thick plastic laminated sheet of size 200mm x 100mm including brass screws and washers etc complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 3/4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 6/8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement insulation deteriorated PVC insulated flexible copper conductor cable twin twisted of Size 24/0.20mm 1100 volts grade complete all as specified and as directed.

S&F in replacement MS Housing box 3/4 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement ceiling fan regulator, electronic Socket type, single phase, 230 volts complete all as specified and as directed.

S&F in replacement MS machine screw 25 mm long suitable for fixing bakelite hylam sheets / square blocks complete all as specified and directed .

S&F in replacement MS sunken box suitable for switches/ Socket/ FR as per existing site switch box and making good to the disturb surface by PCC complete all as specified and as directed.

S&F in replacement of open construciton copper ballast (choke) suitable for 150 watt HPSV light fitting as per existing complete all as specified and directed.

S&F in replacement MS Housing box 5/6 module suitable for modular switch as per switch box and making good to the disturb surface by pcc complete all as specified and as directed.

S&F in replacement of modular switch 6-10 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular socket, 6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed.

S&F in replacement of modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed .

S&F in replacement modular fan regulator, 2 Module 4 step 180w heavy duty 230 volts as per existing model/make complete all as specified and as directed.

S&F in replacement of capacitor AC 230 volts 2.25 MFD make : Unistar/Tibcon/Asian/Usha

Ditto all as per above item but of size 4 MFD.

S&F in replacement of 3mm thick hylam sheet of any size including brass screws and washers etc as per required at site complete all as specified and as directed.

S&F in replacement modular bell push switch piano, flush type, 6 Amps complete all as specified and as directed.

Supply only self adhesive PVC electrical insulation tape,conforming to IS 7809, Part - 3, Section -1 and ISI Marked, of size as under :-(i) Length - 25.0 Metre(ii) Width - 18/19 mm(iii) Thickness - 0.125 mmMake - Steelgrip/Anchorgrip/Miracle

S&F in replacement of 12 Watt ROUND recess mounted down lighter separate replaceable electronic driver celling cut out dia 160 mm height 16mm round shaped polycarbonate fixture complete all as specified and directed, Make : Havells Cat Part No 12W LED EDGEPRORDDLR12WLED857S or equivalent in C&S/Bajaj/CG/PHILIPS

S&F in replacement of 12 Watt Square recess mounted down lighter separate replaceable electronic driver celling cut out dia 160 mm height 16mm round shaped polycarbonate fixture complete all as specified and directed, Make : Havells Cat Part No 12W LED EDGEPROSQDLR12WLED857S or equivalent in C&S/Bajaj/CG/PHILIPS

S&F in replacement FTL Rod 36W, 1.2 mtr length 220V AC white incandescent effect complete all as specified and directed by Engineer-in -charge. Make Philips/wipro/havells/ Suriya

S&F in repairs LED Bulb 230V AC 9/10 watt cool day light 6500K having maximum height 1020mm heavy duty complere all as specified and directed by Engineer-in -charge. Make :- Havells/Philips/Bajaj

S&F in repairs LED Bulb 230V AC 7 watt cool day light 6500K having maximum height 1020mm heavy duty thred type or as required at site complere all as specified and directed by Engineer-in -charge. Make :- Havells/Philips/Bajaj

S&F in repairs in replacement bed light fancy type with lamp complete all as specified and directed.

M& L for comprehensive maintenance and repair to point wirring with taking out fault in the wirring and reapir to the point wring and making the point wiring serviceable including following works (a) Checking proper working of wiring light or fan point (b) Checking of socket point/switch /holder point including replacement of unseviceable part (c) Replacement of unserviceable baten holder/ tube light/lamps/ ballast/bipin holder /fittings (d) Cleaning of tube light fitting and repalcements of starter (e) one electrician will report for taking complaints at MES Yard.

Supply & Fixing in repairs RCBO four Pole 240Volt, 63 Amp,100 MA protection for earth over load and short circuit complete all as specified & directed. Make : Legrand 411374 / Siemens / GE

S&F in replacement of single core wire 10 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed Make :- Havells/ polycab/ plaza

S&F in replacement of single core wire 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Havells/ polycab/ plaza

S&F in replacement of single core wire 4 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Havells/ polycab/ plaza

S&F in replacement of single core wire 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Havells/ polycab/ plaza

S&F in replacement of single core wire 1.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. Make :- Havells/ polycab/ plaza

Supply and fixing in replacement bracket made out of GI pipe 50/ 40 mm medium grade 1.2 mtr long made to shape with fixing clamps of MS flat 40x6mm nut bolts etc for street light all as specified and directed

Supply & fixing in replacement of integral post top lantern complete with black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories and suitable for LED min 15Watt lamp complete all as specified and directed . Havells cat part No RUBYMINIPT15WLED757PSYMTOPC or equivalent make of Bajaj/C&S/Suriya

S&F in replacement of electronic ballast 2 x 36 watt as required at site complete all as specified and as directed.

Supply and fixing in replacement of metal clad plug top 20 Amps complete,all as specified and directed.

S&F in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.Legrand /Schneider M9/ Semens

S&F in replacement of electronic ballast 1 x 28 watt as required at site complete all as specified and as directed. Make Philips/ Bajaj/ Wipro/ Suriya

Supply & fixing in repairs electronic energy meter tamper proof design digital technology of SINGLE phase 2 wire 1 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete all as specified & directed at site. Make :SARAL OF SECURE OR equivalent in,HPL Havells or as approved by GE.

Supply & fixing in repairs electronic energy meter tamper proof design digital technology of three phase 4 wire 3 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete all as specified & directed at site. Make :Sprint 350 of SECURE OR equivalent in,HPL Havells or as approved by GE.

S&F in repairs Recess/ Surface mounted IP20 PIR movement detector with a built-in switch for lighting. It should be able to take lighting load of 6A. It should control office area of around 20sq.mtr for small movement and 50sq.mtr for large movements. It should have smart daylight sensing for additional savings through daylight override and daylight switching. It should have timer knob (1 to 30 min setting) and light detection knob (100 to 1500 Lux setting) on the bottom face for ease of controlling after installation as well. Smart timer should extend the delay time by 10 mins if movement is detected shortly after switch-off. It should have a retractable shield. Operating temperature +5 to +50 Degree Celsius. It should have EMC compliance IEC (EN) 60669-2-1, Immunity IEC (EN) 61547 And Immunity IEC (EN) 55015 & IEC (EN) 55022, Class B. Max power consumption of 1.2W at standby. Make Philips LRM1071 or Bajaj/ Crompton

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm graded crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete. Note:- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

Supply & Fixing in repair MCB Triple Pole and Neutral 63 Amps, MCB shall be of 10 KA breaking capacity ‘C’ characteristic as per IS – 8828 of 1996 with fully safety shutters transparent label holder air circulating channels Bi-contact terminal dual position DIN rail, clamps, enclosure and items inside enclosure shall be of similar complete all as specified & directed.Make : Legrand DX3 TPN C 63A AC 408683 / Siemens cat no- 5SL44637 RC / GE

Supply & Fixing in repairs RCBO double Pole 240Volt, 32 Amp,100 MA protection for earth over load and short circuit complete all as specified & directed. Make : Legrand 411333 / Siemens / GE

SONAL CONSTRUCTION AND ENGINEERS

kiran electrical and hardware centre

RAVI TEJ BUILDERS

Sachdeva Enterprises

RAINA SALES AND SERVICES

mandeka constructions