PROVN OF RCC PORCH IN FRONT OF SINGLE LIVING OFFRS ACCN SHED ALONGWITH HARDSTANDING IN FRONT OF GUARD ROOM NEAR SHED NO 16 PARKING SHED ALONGWITH INTERLOCKING TILES AND SOLAR POST TOP LANTERN AND GARDEN LIGHTS AT OFFRS MESS UNDER GE NARANGI

Amount

Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed.

M&L surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.

Removing of surplus excavated material not exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in beams, seismic bands, cantilevers, bressumers and lintels complete all as specified as directed.

M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.complete all as specified as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for TMT bars 8 mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick ( Horizontal or sloping) complete all as specified as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.

M&L for brickwork with subclass ‘B’ old size bricks, straight or curved on plan exceeding 6.00m mean radius built in CM 1:6 complete all as specified as directed.

M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for 100 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in floor finished the surface even and rough without using extra cement complete all as specified and as directed.

M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for 20 mm thick granite (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in white cement 1:2 using granite dust with admixture of pigment to match with the shade of granite work including rounding of exposed edges of granite over and including 20mm thick backing coat in cement mortar 1:6 complete all as specified and as directed.

M&L for heavy duty parking tiles of size 300mmX300mmX10-12mm thick/400mmX400mmX10-12mm thick of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including 20mm thick backing coat in cement mortar 1:6 complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with 50mm thick sand cushioning with proper compacting through vibratory compaction by using plate vibrator including filling the joints with sand complete all as specified & as directed.

M&L stainless steel handrails febricated to required design using 304L stainless steel pipe of 50mm dia welded to 25mm dia stainless steel pipe balusters @ 300 mm centre to centre with fittings including welding and polishing, buffing fixed to floors with necessary stainless steel plates, flenges, canopies, screw dooms etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new wall surface and applying two coats of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over a coat of primer and a coat of wall care putty of average thicness 1.5mm complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed. Note: To be executed for provision of ridges and hips.

S&F Rolledmld steel roof trusses ( framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat section) including distace pieces, cleats etc confirming to Fe 410-W ( Gde E-250 Quality B)complete all as specified & as directed.

M&L for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F BUDZSolar LED Bollard 1 Watt 5700 K IP 65 LED Solar Bollard with built in solar panel LED light and Lithium battery with charge controller Including necessary PCC and Earth work required for fixing of bolard. complete all as specified and as directed.Make HAVELLS MOdel BUDZ Solar LED BOllard or equivalent of BAJAJ/ CROMPTON.

S&F MANOR Solar LED Post Top 20 Watt 5700K IP 65 LED Solar post top with built in Solar panel LED light and lithium battery with chrge controller and 2 PIR sensors with 360 degree coverage including necessary earthwork, PCC etc complete all as specified and as directed.Make HAVELLS MOdel MANOR 20W SOLAR POST TOP or equivalent of BAJAJ/ CROMPTON.

Shri Debajyoti Das

SANDIP BARUAH

S. R. TRADING

M/S SAMIR PAUL

R. D. ENTERPRISE

M/S SEBANGSHISH TRADERS

SHANKAR ENTERPRISE

M/S Narayan Chandra Das

VISHWAKARMA ELECTRICAL

M L TREATMENTS