82468 SPECIAL REPAIRS TO 09 UNITS OF BUIDLING NO.P-43 AND PROVISION OF EXTERNAL LIGHTING AT VARIOUS LOCATIONS IN PTC KALPAKKAM UNDER AGE(I) NAVY CHENNAI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including padding concrete on roof, complete all as specified and as directed

Material and Labour for applying epoxy treatment for sunken floor over 15mm thick rendering on fair faces of brick work or concrete surfaces with cement plaster 1:3 with WPC @ 2% by weight of cement (Note: Water proofing compound will be measured and paid separately) including finished even and smooth without using extra cement (for sunken floor) complete all as specified and as directed

Material and Labour for PCC 1:5:10 type E2 (using 40mm graded aggregates) as inn mass concrete as in sunken floor, complete all as specified and as directed

Material and Labour for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in screed bed over sub base, complete all as specified and as directed

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance not exceeding 2 km out side the perimeter of the campus at the disposal of Contractor all as specified and as directed.

Material and labour for coloured joint free non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15 mm thick in cement mortar 1:6 etc complete all as specified and as directed.

Material and labour for coloured joint free non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15 mm thick in cement mortar 1:6 etc complete all as specified and as directed.

Material and labour for glazed ceramic tiles 300mmx450mmx7 mm thick dados set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including 10mm thick backing coat in cement mortar 1:3 all as specified and as directed.

Material & Labour 10-15mm thick Brick tiles laid In cement mortar (1:6) or lime mortar (1:3) of 15mm thick, complete all as specified and as directed

Dismantling of brick tiles or terracing tiles of roof treatment on vertical surface in roofs parapet walls any thickness, existing roof treatment of any description in any condition including removing top surface and removing all the debris all as specified and directed

Cutting grooves in brick/concrete wall, 75mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified and as directed

Removing of debris or building material any description obtained from demolition beyond the lead included in the rates, including loading, unloading and stacking at the distance exceeding 1.5km but not exceeding 2 km, out side defence land complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and supplying evenly cement slurry at the rate of 3kg/Sqm over cleaned surface all as specified and as directed by the E-in-C

Material and Labour for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges work complete all as specified and directed

Material and labour for 5mm thick cement screed in cement mortar (1:4) with waterproofing compound at the rate of 2% by weight of cement to have smooth surface for laying of waterproofing membrane, complete all as specified and as directed. Note: Water proofing compound to be measured and paid seperately

Material & Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with WPC @ 2% by weight of cement complete all as specified and as directed. (Note: Water proofing compound to be measured and paid seperately) including finished even and smooth without using extra cement.

Preparation of surfaces and applying bituminous primer @ 0.4 Liter/Sqm, complete all as specified and as directed

Material and Labour for the APP polymeric membrane minimum weighing 3.5 to 5kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid by forced application complete in roof surfaces and on vertical surfaces, all as specified and directed

Material and labour for cement concrete tiles 300X300X20-25mm thick machine pressed, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over a coat of 15mm thick screed bed in CM 1:6, complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B1 (using 12.5mm graded aggregate) as in padding concrete to maintain required slope including coving to junctions of parapet and roofs, complete all as specified and as directed

Taking down of chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) all as specified and as directed.

Taking down chowkat or frames (without taking of shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm, complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing. complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded with single side Prelaminated PVC sheet used instead of Plain colour PVC sheet and stile and rails having one side feathered edge and on other side 10mm 90 degree bent edge having C'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing 2nd class hard wood plain solid straight chowkat and frames, wrought framed ,rebated in the solid, rounded or chamfered , put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 35mm thick flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides including 6mm thick teak wood lipping complete all as specified and as directed

Material and Labour 35mm thick 2nd class hard wood plain framed pannelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part1), kilo seasoned and chemically pressure treated all as specified and as directed

Supply and Fix for 30mm thick second class hardwood made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.,(without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I section 8, clause 8.24(a) complete all as specified and as directed

Supply and fix 25mm thick flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides including 6mm thick teak wood lipping complete all as specified and as directed

Supply and fix in repairs 18/19 mm thick block boards, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and as directed.

Material and Labour 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with screws but bull nosed , splayed, chamfered or rounded on one edge or face exceeding 13sqcm but not exceeding 25sqcm, complete all as specified and as directed

Supply and fix sheet glass ordinary quality 4mm thick, in square not exceeding 0.5sqm each pane complete all as specified

Supply and fix aluminium alloy wire cloth 0.45mm dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples, complete all as specified and directed

Supply and fix 75mm butt hinges, medium weight, stainless steel complete all as specified and directed.

Supply and fix 100mm butt hinges, medium weight, stainless steel complete all as specified and directed.

Supply and fix 125mm butt hinges, medium weight, cold rolled mild steel fixed complete all as specified and directed.

Supply and fix 150mm size aluminium handle , cast type, anodised complete all as specified and directed.

Supply and fix 125mm size aluminium handle , cast type, anodised complete all as specified and directed.

Supply and fixing 200mm long Aluminium, anodised, barrel tower bolts of extruded section and complete all as specified and as directed.

Supply and fixing 150mm long Aluminium, anodised, barrel tower bolts of extruded section and complete all as specified and as directed.

Supply and fixing 125mm long Aluminium, anodised, barrel tower bolts of extruded section and complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium complete all as specified and as directed.

Supply and fix 200mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium complete all as specified and as directed.

Supply and Fix magic eye 15mm dia steel body suitable for 35 to 40mm doors with all necessary fittings all as specified and as directed

Supply and fix Mild steel Angles, bars, flats etc... as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles, steel confirming to Fe 410-O or Fe 310-O, complete all as specified and directed.

Material and Labour providing PCC type B1 1:2:4 (20 mm graded aggregate) in as in hold fast fixing, complete all as specified and as directed

Supply and fix in repair aluminium anodised tubular rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail, complete all as specified and as directed

Supply and fix 125mm door stopper of aluminium alloy body, with rubber bush, complete all as specified and as directed

Supply and fix 300mm mild steel ordinary rat tail rod pattern springs incl roller plates complete

Supply and fix in repairs vitreous china squatting pan 'Orissa' pattern long pan of size 580 x 440mm white with 'P' or 'S' integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern) including provision of lime concrete bedding all as specified and as directed.

Supply and Fix in repairs PVC valves less flushing cistern low level 10 liters capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and as directed

Supply and fix in repairs vitreous china wash hand basin white flat back size 550 x 400 mm white complete waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed

Supply and fixing in repairs pillar tap 15mm dia cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed, complete all as specified and as directed

Supply and fix 32 mm dia bore high density polyethylene pipe (HDPE) of pressure rating 6kgf/ cm2 fixed complete on walls, floors or ceiling, complete all as specified and as directed.

Supply and Fix in repair of fancy type bib taps cast copper alloy chromium plated with crutch and butterfly handle screwed down, screwed for iron pipes of 15mm dia bore of for brass ferrule and fixed all as specified

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed

Material and Labour PVC (SWR) multiple floor trap of 75mm outlet plain with grating including jointing with solvent cement, complete all as specified and as directed

Supply and fix repairs fancy type Angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore, complete all as specified and as directed

Supply and fix in repairs 15mm bore cancelled stop valves cast copper alloy fancy type chromium plated screwed don high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union

Supply and fix in repairs Brass chromium plated shower rose 125mm size, with or without swivel joints, including fixing to steel pipe or union, complete all as specified and as directed

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard bar railing 60cm long, complete all as specified and as directed

Supply and fix vitreous china, soap dish, white, approximate size 160 mm x 160 mm x 90 mm, embedded in wall complete, all as specified and directed.

Supply and fix stainless steel kitchen plate rack of size 910 mm x 790 mmx255 mm with racks and shelf including bedding in cement mortar on to wall or including fixing cantilever brackets complete all as specified and as directed.

Taking down cement plaster on brick walls including racking out joints, hacking for key scrubbing down with water all as directed.

Material and labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour foe rendering 15mm thick two layers 10mm thick backing coat in cm 1:4 and 5mm thick finishing coat in CM 1:4 mixed with water proofing @2% by weight of cement finished surface fair and even (Note: WPC will be measured separately)

Material and Labour rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement, complete all as specified and as directed

Material and labour for rendering 15mm thick two layers 10mm thick backing coat in cm 1:4 and 5mm thick finishing coat in CM 1:4 mixed with water proofing @2% by weight of cement with rough cast plasters finishes (Note: WPC will be measured separately)

Material and Labour for rendering 10mm thick on fair faces of bricks work or concrete surfaces in cement mortar 1:3 with WPC.(Note: Water proofing compound will be measured and paid separately) including finished even and smooth without using extra cement,complete all as specified and as directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer and 3mm thick wall care putty all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of exterior weather proof emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and as directed

Material and Labour for complete removal of existing treatment on interval walls and applying two coats of distempers oil emulsion over coat of primer over 3mm thick wall care putty on surfaces of walls, complete all as specified and as directed

Material and labour preparing old plastered surfaces of ceilings and applying one coat of white wash, complete all as specified and as directed

Material and labour preparing old plastered surfaces of walls and applying one coat of white wash, complete all as specified and as directed

Material and labour for preparation of new or previously untreated wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for preparation of old treated wooden surfaces of any description, not exceeding 10 cm width or girth when unconnected with other work or painted in different tint finishing coat with synthetic varnish, complete all as specified and as directed.

Cutting chases, pinning in, for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3 not exceeding 10cm girth complete all as specified and as directed

Supply and fix GI tubing medium grade 20mm bore with all fitting and fixing complete all wall ceiling or laid in floor, including taking up/down ,cleaning for refixing or removal complete as specified and as directed

Supply and fix GI tubing medium grade 25mm bore with all fitting and fixing complete all wall ceiling or laid in floor, including taking up/down ,cleaning for refixing or removal complete as specified and as directed

Supply and fix GI tubing medium grade 40mm bore with all fitting and fixing complete all wall ceiling or laid in floor, including taking up/down ,cleaning for refixing or removal complete as specified and as directed

Supply and fix 40mm dia of pipe Gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe one fixed, complete all as specified and as directed

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc.,

Supply and fix PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints fixed in walls complete all as specified and as directed.

Supply and fix PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

Supply and fix PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed in walls complete all as specified and as directed.

Supply and fix PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

Supply and fix for 75mm dia bore PVC (SWR) junction single,(single 'Y') equal or unequal with access door complete all as specified and as directed.

Supply and fix for 110mm dia bore PVC (SWR) junction single,(single 'T') equal or unequal with access door complete all as specified and as directed.

Supply and fix for 75mm dia bore PVC (SWR) bends any radius complete all as specified and as directed..

Supply and fix for 110mm dia bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fix for 110mm dia bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix for 75mm dia bore PVC (SWR) vent cowl complete all as specified and as directed.

Material and Labour for providing ATT by injecting at point of contact of wood work by chemical emulsion (oil or kerosene based solution) @ 0.5 lit/holes by drilling 6mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified

Material and labour for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm part including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirting, risers etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Supply and fix coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm in skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 10 mm thick in cement mortar 1:4 etc complete all as specified and as directed.

Supply and fix cement concrete tiles 300x150x20mm thick machine pressed, jointed and pointed in neat cement slurry in risers and cut and polished with grey cement and pigments over and including rendering 10mm thick in CM 1:4 complete all as specified

Supply and fix cement concrete tiles 300x300x20mm thick machine pressed, jointed and pointed in neat cement slurry in floors and cut and polished with grey cement and pigments over and including 15mm thick screed plaster in CM 1:6 complete all as specified

Supply and fix Chequered cement concrete tiles bull nosed 300X300X20mm thick, as in treads with grey cement and pigments, set, jointed and pointed in neat cement slurry in trends over and including 20mm thick screed plaster in CM 1:6 all as specified and as directed.

Supply and fix in repairs ball brass valves of 40mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs, complete all as specified and as directed

Supply and fix repair aluminium hat pegs solid body 125mm to 175mm long, complete all as specified and as directed

Supply and fix stainless steel kitchen sink with drainage board of over all size 915mmX460mm and bowl size 410mmX330mmX160mm, 1mm thick with plug washers and wastes; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed

Material and labour cup board shutters made with 19mm thick prelaminated particle board interior grade with decorative laminated on one side and other side balancing white lamination medium density, exterior grade, including 6mm teak wood lipping all as directed.

Supply and fix green marble stone, 16mm thick including bull nose edge mirror polished in kitchen platform laid & jointed over and including 15mm cement screed in CM 1:6, complete all as specified and as directed

Supply and fix mild steel lock of 7 levers with self locking and night latch of size 100mm.Make: Godrej or equivalent

Material and labour for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finished, complete all as specified and as directed

Material and labour cement concrete designer (chequered) tiles of size as directed by Engr-in-charge, 20-25mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed

Material and Labour providing PCC type B1 1:2:4 Type B1 (20 mm graded aggregate), set in cement mortar 1:6 in window or door cills, lintels, steps coping, kneelers, pier caps, columns, post etc and setting in mortar complete all as specified and as directed

INTERNAL ELECTRIFICATION: Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings complete etc removing the material for taking into Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking out old/ existing MCB DB SPN/TPN complete by disconnecting for taking into Credit, all as specified and directed.

Taking down old sub main wiring with 2 runs/ 4 runs or 4/6/10 sqmm aluminium / copper cables including making good to disturbed surface of wall/ floor etc., complete all as specified and directed.

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling excluding terminal boxes made out of 2mm mild steel sheet, of suitable module including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded cable 1100 V with copper conductor as earth continuity conductor and connecting to common earth dolly fixed to wall/ceiling/roof excluding modular metal box and white cover plate with frames, switches, sockets, regulators etc.. suitable for modular type fittings/ fixtures complete all as specified and as directed for the following:-

One light point controlled by one switch

One ceiling fan/Exhaust fan point controlled by one regulator/ switch

One 3 pin socket outlet 5 amps socket on independent board

One 3 pin socket outlet 5 amps socket on same board

One bell/buzzer point controlled by one push button

One light point/ fan point controlled by two Nos of two way switches

All as per item No.59 here in before but 3 pin socket outlet 15 amps sockets on independent board with 4sqmm multistranded copper PVC insulated cable.

Material and labour for circuit wiring/sub main wiring with two run single core 4sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25mm dia/PVC casing capping 25mm including conduit accessories complete all as specified and as directed. Note : Three runs of 4 sqmm cable and one run of 25 mm conduit/casing capping will be measured as one unit length.

Material and labour for circuit wiring/sub main wiring with two run single core 16sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 16 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25mm dia/PVC casing capping 25mm including conduit accessories complete all as specified and as directed. Note : Three runs of 16 sqmm cable and one run of 25 mm conduit/casing capping will be measured as one unit length.

Supply and fix switch modular 10amps one way flush type complete all as specified and directed .

Supply and fix switch modular 20amps one way flush type with neon indicator complete all as specified and directed

Supply and fix switch socket modular 3pin 5amps flush type complete all as specified and directed.

Supply and fix switch modular 10amps two way flush type complete all as specified and directed

Supply and fixing of modular type switch socket outlet 3pin 15Amps socket complete all as specified and directed

Supply and fix only electronic regulator socket step type 2modular type for ceiling fan complete all as specified and directed

Supply and fix ceiling rose 3 terminals PVC/Polycarbonate, isolated body complete all as specified and as directed

Supply and fix Bell, AC,230 Volts, single pole, Multi music type complete all as specified and as directed

Supply and fix Modular Bell push 6A, 1 module, complete all as specified and directed.

Supply and fix Modular white cover plate with frame 1 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 2 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 4 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 6/8 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 1/2 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 3 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 4 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 6/8 module complete all as specified and as directed.

Supply and fix Vertical DB TPN 4 way Cat No.DSDLVDRBAOFO8 including one 100A TP, 25KA MCCB lcs = 50% Icu Cat No.ISLAST0080/100 as incomer complete in SS enclosure vertical double door type complete all as specified and directed.

Supply and fix MCB DB SPN 12 way complete in SS enclosure double door type with 200 amps rated bus bar complete all as specified and directed.

Supply and fix RCBO DP, 100mA, 240volts 63 Amps with front face indication for earth leakage fault IP 20 protected terminals 35sqmm terminals sliding shutters. Complete all as specified and as directed by Engr-in-charge.

Supply and fix of MCB SP 240 volts 5-32 amps with 10KA breaking capacity complete all as specified and directed

Supply and fix of MCB SP 415 volts 63 amps with 10KA breaking capacity complete all as specified and directed

Supply and fix LED light fitting 4feet, 1x20w, a trendy wall mounted batten, with extruded aluminium housing, with integrated LED driver, etc complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make:C&S Electric Cart Part No. LTTB4F20WLED/W or equivalent in Philips/Wipro/Crompton/Bajaj/Havells

Supply and fix LED light fitting 2 feet,1x10w, 230 V, a trendy wall mounted batten, with extruded aluminium housing, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, including taking down old light fittings complete all as specified and directed Make: C&S Electric Cat Part N0:TTB2F10WLED/W or equivalent in Philips/Wipro/Crompton/Bajaj/Havells

Supply and fix energy saving new generation 10 W LED IP 65, Bulkhead luminaries with opal diffuser complete all as specified and directed. Make:C&S Cat Part No. SIRIUS/10W or equivalent inPhilips/Wipro/Crompton/Bajaj/Havells

Supply and material for pendent holder, PVC/Polycarbonate type with LED bulb 9 watt all as specified and as directed by Engineer-in-Charge

Material and labour for earthing complete with copper earth plate of size 600 mm x 600 mm x 3.15mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to copper strip of 20mmx3.0mm by means of bolts, nuts, check nuts and washers of copper and connecting to earth dolly all as shown in electrical plate No.3 of SSR part I of 2009 & testing complete including 40mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC(1:3:6) type C1 earthing chamber, pre cast slab 50mm thick in cement concrete (1:2:4) type B1(reinforced with welded steel wire fabric (XPM) weight not less than 4Kg/sqm with frame, test box, including 20mm bore water pipe medium grade GI tubing including GI funnel, wire mesh etc, (NOTE:- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the complete the respective items) all as specified and as directed by Engineer-in-charge

Supply and install, panel sheet metal box size 0.7x0.45x0.18m for existing Energy meter indoor type dust and vermin proof fabricated out of CRCA sheet not less than 3.15mm thick fixed on angle on iron frame of size 50x50x6mm duly powder coated complete with all as specified and as directed by Engr-in Charge.

Material and labour for earth continuity conductor or copper strip 20x3mm buried in ground/fixed on wall/drawn in 40mm dia light grade GI pipe complete with all as specified and as directed

Supply and fix of single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB 240V, 20Amps complete all as specified and as directed

Supply and fix water heater storage type 25Ltr capacity vertical type,5star rating. Complete all as specified and as directed

Removing of ceiling fan/exhaust fan and electric meter from existing place and refixing after servicing on same place all as complete all as specified and as directed

Material and labour for telephone sockets modular type ,complete all as specified and as directed

Material and labour for TV socket special modular flush type ,complete all as specified and as directed

Material and labour foe PVC conduit 20mm dia(for TV and data cable) ,complete all as specified and as directed

Supply and fixing Junction box (1 to 4 Way) for TV/Tele wiring ,complete all as specified and as directed.

EXTERNAL ELECTRIFICATION : Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100volts grade, of size 3core 10sqmm, complete all as specified and directed.

Supply and fixing metal Box 200X140X95mm internal size with hinged door(L) with 1No PVC connector 4way 16Amps and 1Nos MCB SP 6Amps including fixing bracket, Nut, Bolt etc complete Make:Sintex Cat part No.GSJB2014 or Equivalent

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundations or laying under ground cable, pipes etc. and getting out in soft/loose soil etc., complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm in any type of soil, complete all as specified and as directed by Engr-in-charge

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at level not exceeding 1.50 metre above the starting point complete all as specified and as directed.

Supply and spread clean dry river sand in trenches, including levelling, punning for cushioning of cables all as specified. NOTE: In case of non availability of river sand, riddled earth may be used as approved by AGE(I). Punned thickness of sand cushioning shall be measured.

Supply and lay in trenches burnt clay fly ash bricks sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable all as specified and as directed

Supply and laid in trenches GI pipe light grade 40mm dia as for road crossing of cable, complete all as specified and directed

Supply and fixing new 40W post top light (LED) fitting new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaries with high power LEDs as light source and electronic driver all as specified and as directed. (Make: Crompton Cat No LPTO-40-CDL or equivalent in Bajaj/Philips as approved by AGE(I)/C&S electric as approved by AGE(I)

Material and labour for cutting the road in the size not exceeding 0.4 mtr x 0.6 mtr for laying of UG cables/Pipes and making good with the existing surfaces by returning filling with suitable earth and top 15 cms filled with PCC (1:4:8) type D2 using 40 mm graded aggreagtes, as in mass concrete, after laying the pipe/cable, complete all as specified and directed

Supply, Installation, Testing and Commissioning of LED flood 150 watt light with a nominal system lumen output of 16500 lumens and a minimum system efficacy of 110 lumen/watt. The luminaries shall have rated system lifetime of 50,000 burning hours at L70. The luminaries should have cool white colour temperature (5700K) and a CRI>70. The luminaries shall meet IP65 rating with THD<20% & Pf>0.9. The luminaries housing should be made of pressure die cast aluminium. The total power consumption should not exceed 150W (including driver). Make: Crompton Model No. LFLN-150-CDL/60-M or equivalent as mentioned in PS

Supply and fix 2 core 2.5sqmm PVC insulated PVC sheathed weather proof multistranded copper conductor cable 1100 volts grade drawn through in GI conduit, pole etc with MS Clamp from junction box to street light fitting all as specified and as directed

Supply and fix High density poythelyne(HDPE) pipes of pressure rating 6kgf/sq/m of size 25mm for cable protection laid in trenches complete all as specified and as directed.

Supply and fixing GI pipe medium grade with necessary fitting in floor/pillar/fixed on pole of size 50mmdia complete all a specified and as directed

Supply and fixing thermoplastic cable junction boxed IP 55/IP 65 with metric knockout for cable entry with terminal of size 155x210x92mm on pole with MS clamp, nut bolts, washers and gland suitable for 10/16sqmm 2/4 core cable and all as specified and as directed

S VENKATESAN

power links