WBPWD/SEWEC/BED /NIQ-08/2025-26-2nd call

Amount

SITC of Automatic Lift (as per manufacturer design & as per detailed specification below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.

.Make : OTIS/KONE/ SCHINDLERs/ Electromec / LT Elevator/United Elevator /Escon / Thyssen Krupp /Bharat Elevator Co. Ltd/ Engineers Vertical Services// Johnson /Omega / Other makes those have credential in Govt. Sector.)

Type: Passenger Lift .

Load: 16 Passenger / 1040 Kg

Control- Microprocessor based with AC variable voltage & variable frequency ( VVVF)

Machine:- Energy efficient machine, Gearless, with Machine Room.

Position of Machine Room: - Above the hoistway.

Speed: 1.0 Mtrs./ Sec

Floor served : G+4

Landing:- 5, all on same side

Total Rise : 13.7 Mtr

Operation- Microprocessor based simplex full collective with or without attendant.

Signals Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.

Leveling accuracy: +- 5 mm(Micro levelling arrangement)

Car inside: As per standard design & IS (WxDxH).

Car Entrance : As per standard design & IS.

Car Enclosure : Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.

Car Ceiling & Lighting: Stainless Steel with hairline finish with I ED lighting and Fan

Car Ventilation: Pressure fan with anodized aluminium grill.

Car Flooring: Decorative granite fiooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre/ telescopic opening automatic door provided with V3F controlled door drive system

Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system

Door Opening: Automatic power oprated door with full length PhotoccH assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES

ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.

Overload Protection: Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio display indication

Emergency lighting in car : Battery operated emergency lighting in the lift car.

Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room

Emergency Alarm: Battery operated alarm bell system in lift car and control room

Fireman switch : Fireman switch at main landing terminal.

Voice Synthesizer : Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.

Main rope : As per manufacturer's standard conforming to IS.

DIMENSION OF SHAFT & POWER SUPPLY

Available Shaft Dimension : 1600 mm X 3000 mm

Pit Depth : 1600 mm

Overhead: 4700 mm

Electric power supply : AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS.

Cost for all massonary & fabrication work for installation of Lift & allied accessories, patch modification, temporary or related makeshift arragement regarding lift installation, minor civil work, Scaffolding, wall/floor cutting, pocket cutting on wall and mending good the damages properly is to be included.

Bidders are requested to physically visit the site, verify the above mentioned details/ dimensions. Any other item or items that is required for smooth completion of the work if left out due to inadvertance should be deemed to be included in the scope of work. Bidders are also requested to physically visit the site and quote the rate accordingly.

Dismantling charges of the existing Lift installation including Lift car, guide rail, rope, couterweight, incl. all the accessories at Machine Room and other accessories as per site requirement and as directed by EIC by Co's own tools & tackles by maintening normalcy as far as possible.

Dorado System (BID ID -6609953)

C. G. ELEVATOR AND SERVICES (BID ID -6562543)