Balance work Supply of Material and Labour

Amount

Labour Work

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.All works up to Plinth level.'In beam,column,lintl,slab etc

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls Under 20 cm wide

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (labour only)

Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including all labour and T & P etc. required for proper completion of work. (Labour only)

Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including , labour and T & P etc. required for proper completion of work. (Labour only)

10mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortor including , Labour T.&.P. complete of work .(Labour only)

12/15mm wall plaster 1:6 cement :coarse sand with groove at junction including labour T&P etc. (Labour only)

Providing & Laying Polished Vitrified tiles in Floor/Dado different sizes (thickness to be specified by the manufacturer) with water absorption's less than n 0.08% and conforming IS 15622 of approved make in all Colours and shades, laid on 20mm. Thick 1:4 (1cement : 4 Coarse sand) Including grouting the joints with white cement and matching pigment etc. Complete.Size 600*600 mm.i/c all material labour T&P complete

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm i/c all material labour T&P complete

Same as above but for floor

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work (paid for double moulding only)

Providing and fixing of 2mm. Thick Section Powder Coated aluminium work for Window / Door with extruded built up standard tubular sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete: Window

S/L Door

D/L Door

Cement washing (white cement) one coat onwall or ceiling whereever required

Providing and Fixing tiled false Ceiling of specified materials of Size 595x595mm in true horizontal level , suspended on inter locking metal grid of hot dipped galvanized steel sections (Galvanized @ 120 grams/sqm both side inclusive ) consisting of main "T" runner wqith suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet , spaced at 1200 mm center to center and cross "T" of size 24x25mm made of 0.30 (Model-Classic RH95 Armstrong)

Supply, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by scroll compressor controlled by inverter complete with indoor and outdoor units with individual/group wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, with initial topup of refrigrant to run the machine satisfactory .Machine will be operate upto 52C ambient temperature. Each outdoor Unit should have atleast 2 compressor and both should DC inverter end. internal control cabling and fittings etc. as per details given in specifications and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply.Make -voltas ,Hitachi,bluestar'Outdoor Unit 24 HP Heat Pump Type

Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger.Make:- Mandev, Maxflow ,rajco,mettube,hariom (a) '41.2 mm dia 19 mm thk. Insulation (B)'34.9 mm dia 19 mm thk. Insulation (C)'28.6 mm día 19 mm thk. Insulation (D) '22.2 mm dia 19 mm thk. Insulation (E) '19.04 mm dia 19 mm thk. Insulation (F)'15.9 mm dia 19 mm thk. Insulation (G)'12.7 mm dia 13 mm thk. Insulation (H)'9.5 mm dia 13 mm thk. Insulation (I) '6.4 mm dia 13 mm thk. Insulation

Supply & Fixing of suitable G.I Slotted angle channnel with G.I. Threaded G.I. Hanger for Copper pipe and cable tray, G.I. nut bilts etc.

Providing and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. Make:- Finolex,Supreme, Kissan ,Astral'25mm dia

32 mm dia

50 mm dia

Supply & hand fabrication Ducts made out of G.I. sheets of Complete job as per detailed drawing.(sail/tata/zindal)'24 Guage

22 Guage

20 Guage

Supply & Installation of M.S angle G.I. support , G.I. threaded rod, nut,bolt etc

Supply & Pasting Of 12MM Thick Nitrile/XLPE Rubber Insulation

Supply and pasting of Accoustic Linning

Supply & Installation of Aluminum Powder coated 6"/8" Supply/Return air Grill/Diffuser

CANVASS CONNECTION

Materials

Course sand (Hameerpur)

Brick

Cement PPC (packed in 50 kg bag) make- Birla,Prism, ACC, Mycem,J.P.

TMT steel MS round bar confirming FE-500 I.S.I.

M/s S. N & Company