REPAIR TO JOINERIES, ROOFING, CEILING, FLOORING AND CERTAIN OTHER WORKS AT AF STATION NATHATOP

Amount

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down shutters of any description but exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description but not exc. 1 Sqm each complete all as specified and as directed

Dismantling timber scantling 40 Sq. cm and over in section, in any position, unframed work.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed and specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as directed and specified.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof complete all as specified.

Dismantling wall and ceiling boards (fibre pulp/insulation) any thickness including cover fillets complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,compete all as directed all as directed.

Second class hard wood clean sawn as in scantling,complete, all as specified.

M&L for second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, compete all as directed all as directed.

S&F 2nd class hardwood plain framed panelled factory made shutters 35mm thick (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board med density/wood particle board with commercial face veneers fixed to chowkats compete all as directed all as directed.

S&F 2nd class hardwood glazed and skelton shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers compete all as directed all as directed.

Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail & bottom rail on either side & 10mm (5mm x 2mm) thick 20 mm wide cross PVC sheet as gap insert for top rail & bottom rail; Panelling of 5mm thick teak face colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with 5mm x 30mm PVC sheet beading, and joined together with solvent cement complete all as shown in drawings given on page 156 of SSR Part-II (2010). The width of stiles and rails shall be as specified in para 8B.2.1 on page 143 of SSR Part-II (2010). Each PVC door shutter leaf shall consists of 3 Nos 100mm long MS butt hinges including screws all as specified and as directed.

Factory made PVC single door frame of size 50 x 47 mm with a wall thickness of 5 mm thick sheet moulded teak face colour sheet reinforced with 19mm x 19mm square tube having wall thickness 19 gauge complete all as shown in sketch on page 160 of SSR 2010 (Part-II).The door frame to be fixed to the wall using MS screw 75 mm long with PVC fastener complete as per manufacturer's instructions and all as specified.

S&F aluminium anodised barrel tower bolts, extruded section of 100mm long compete all as directed all as directed.

S & F aluminium anodised handles fabricated type extruded section of 150 mm, long complete all as specified .

S&F Butt hinges, medium weight cold rolled 100 mm size ISI marked compete all as directed all as directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified compete all as directed all as directed.

M & L fixed in repair MS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with weilding, painting complete all as specified.

S & F framed work such as grills , gratings etc with ends of bars shouldered and or rivered or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to FE 290 Gde E- 165 complete all as directed and specified.

S&F Wind ties for roof including securing bolts posts and struts fencing including cutting taps to shape as directed drilling holes flat fillets including all necessary drilling bolting or reveting etc.

S & F in repair steel rolling shutters 1.25mm thick of laths gear operated type with chain wheel and hand chain as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete all as specifeid and as directed.

S&F in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing

S&F in repairs, floor door stopper 150 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed all as specified.

S & F in repair Brass Mortice lock 4 lever, vertical type, size 100 mm incl plates and two keys suitable for all doors complete all as specified.

S & F in repairs Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F in repairs Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

Repair to existing aluminium door by replacing of rubber beading, aluminium beading, screws, replacement / refixing of glass and other accessories like door closer, hinges as reqd and making door functional incl taking down if reqd and reassemble door complete all as specified. Note- door closer, floor spring, glasspanes will be measured separately.

Repair to existing sliding/openable aluminium window by replacing of rubber beading, aluminium beading, screws, replacement of glass and other accessories like aluminium snap beading, rubber gasket glazing clips, hinges as reqd and making window functional incl taking down if reqd and reassemble window complete all as specified. Note- Glass panes/GI wire will be measured separately.

M&L 25 mm thick, PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in flooring compete all as directed all as directed.

M&L Screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:4) compete all as directed all as directed.

Non skid matt finish ceramic coloured tiles, 7 to 9 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

M&L Rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified.

M&L White glazed ceramic tiles glossy finish of size 300x200x7mm thick in dado’s/skirting etc. set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles complete and all as specified.

Non skid tiles coloured exc 0.06 sqm and n.exc 0.11 sqm each tile, 7-8mm thick of any colour pattern in floor set and jointed in grey cement slurry and pointed in white cement to match the colour of tile complete and all as specified.

M&L for 100 mm thick cement concrete type D- 2 (1:4:8) (40mm graded aggregate) as in sub base of tiles,complete all as specified and directed by Engr-in-charge.

M&L rectified coloured glazed cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed

M&L for Italian tiles laminated wooden flooring of size 1214mm x 193mm x 8.00mm thick type AC-3 and fixing by using a coat of approved adhesive not less than 1.32 kg/sqm by weight over 2mm thick foam over existing even and smooth surface all as specified and directed by Engr-in-Charge complete all as specified. Make :- Kajaria/ Action Tessa/Pergo

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified.

S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.60mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified.

Description all as per Ser Item No 42 here in before but except sheeting.

S&F wall panelling on existing wall surface made out of PVC hollow profile section of size 150mm x 10mm with a wall thickness of 1mm (+/-) 0.2mm to be fixed on wall by self tapping screw of size 19mm x 6mm after puttin rawal plugs. The edge and periphery finally to be covered by extruded PVC corner angles beading section of size 28mm x 12mm with a wall thickness of 1mm complete all as specified and as directed by Engr-in-Charge.

M&L for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Gl frame work of size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-charge.

Repair to existing sliding/openable aluminium window by replacing of rubber beading, aluminium beading, screws, replacement of glass and other accessories like aluminium snap beading, rubber gasket glazing clips, hinges as reqd and making window functional incl taking down if reqd and reassemble window complete all as specified. Note- Glass panes/GI wire will be measured separately.

Dismantling of existing distrubed GI pipe as snow marker along the road side and refixing and making good in ground embeded in PCC 1:3:6 type C-2 using 40mm graded stone agg as in foundation and mass concrete including painting of colour choice all as specified and directed

M & L complete removal of existing roof treatment and preparation the roof surfaces for new reatement on roof , complete all as specified. Note : The rate quoted shall be deemed to include for dismantling and refixing in position of wind tie and lightening protection after carrying out the treatment.

M & L APP based polymeric water proofing membrane , five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per Sqm including cleaning surfaces, complete all as specified.

18/19mm thick pre-laminated particle board interior grade, pre laminated one side with decorative choice lamination & other side white lamination fixed with hinges to timber frame work including 6mm thick teak wood beading alround of shutter as directed by Engr-in-Charge.

Applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not exc. 10 cm in width or girth including preparation of new surfaces complete all as directed and specified.

Applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm in width or girth including preparation of new surfaces complete all as directed and specified.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer, including necessary preparatioon of new wooden surfaces of any description over 10cm width or girth compete all as directed all as directed.

M&L for Italian tiles laminated wooden flooring of size 1214mm x 193mm x 8.00mm thick type AC-3 and fixing by using a coat of approved adhesive not less than 1.32 kg/sqm by weight over 2mm thick foam over existing even and smooth surface all as specified and directed by Engr-in-Charge complete all as specified. Make :- Kajaria/ Action Tessa/Pergo

S&F 4.8 mm thick sheet glass ordinary quality as in aluminum door and windows complete including necessary rubber gasket and aluminiumm snap beading complete all as specified and directed by Engr-in-charge all as specified.

S&F 5mm thick sheet glass ordinary quality tinted sheet glass ( one side mirror finish) in aluminium frame including necessary rubber gasket and aluminiumm snap beading complete all as specified and directed by Engr-in-charge.

S&F in repair aluminium snap bead (Glazing clip) for securing glass etc with rubber in aluminium frame work

RANBIR ENTERPRISES

BALVINDER SINGH AND SONS