COMPREHENSIVE MAINTENANCE OF B/R WORKS FOR BLDG IN DPTI COMPLEX AND LEFT OVER AREA OF DAD AT NEW CANTT PRAYAGRAJ

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

S&F for joint free non skid Ceramic tiles, coloured, 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for glazed ceramic tiles, coloured 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F for vitrified tiles, light shade 8 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for vitrified tiles, light shade, 8 to 10mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for vitrified tiles, light shade, 8 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as Dado/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:3 complete all as specified and directed.

S&F for heavy duty exterior finish pavement tiles, coloured, superior quality, 300x300x10mm thick as in floors/ pavement etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exc 250 ltrs but n exc 500 ltrs from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position and writing date of cleaning with synthetic enamel paint with 75 mm text height in DD-MM-YY format, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exc 500 ltrs but n exc 1000 ltrs and above from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position and writing date of cleaning with synthetic enamel paint with 75 mm text height in DD-MM-YY format, complete all as specified and directed.

S&F for 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings like elbow, tee, socket, bend etc on walls/ceiling or laying in floors incl taking up or down old steel tubing and connections and removing to store or removing from site complete all as specified and directed.

S&F for 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings like elbow, tee, socket, bend etc on walls/ceiling or laying in floors incl taking up or down old steel tubing and connections and removing to store or removing from site complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia incl taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia incl taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed.

Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc., and making good, (cutting not exc 10cm girth) complete all as specified and directed

S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour three layer) of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour three layer) of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (minimum wt 210 gms) complete all as specified and directed.

S&F in repairs PVC tank cover/lid for 500/1000 ltr over head tank complete including fixing the lid with the existing tank with PVC hinges and male and female locking system complete all as specified and directed.

S&F in repair PVC low level syphonic action flushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,450 long PVC connection pipe etc complete all as specified and directed.

S&F in repairs complete PVC assembly/ Kit for PVC flushing cistern of any shape or make or capacity complete all as specified and directed.

S&F in repair SS Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, complete all as specified and directed.

S&F in repair pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed.

S&F in repair fancy type Chromium plated brass stop cock/ angle valve for 15mm bore pipe, fixed in repairs complete all as specified and directed.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs suitable for 15mm dia health faucet abs body with 08 mm dia, 01 mtr long flexible tube & wall hook complete all as specified and directed.

S&F in repairs stainless steel soap dish (oval) type including ss screws and wooden/ plastic cleats complete all as specified and as directed.

S&F in repair acrylic shelf assembly 12cm wide with guard 60cm long complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified.

Supply only 32/40mm bore PTMT waste pipe of best quality,600mm long for wash basin and sink etc complete all as specified and directed.

S&F in repair SS waste coupling for S.S Sink with rubber washer plug etc complete all as specified and directed.

S&F in repair SS waste coupling for wash hand basin with rubber washer plug etc complete all as specified and directed.

S&F in repair two way angle valve/tap with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair Abs chromium plated shower rose 125 mm dia to 150mm dia with 190mm long arm, swivel joints, complete all as specified and directed.

S&F in repair acrylic type corner shelves of 300mm size including ss screws and wooden/plastic cleats complete all as specified and as directed.

S&F for SS peg set of four, fixed with PVC rowl plug and screws complete all as specified and directed.

Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 560 X 450mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

M&L for Granite 15-18 mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white ecment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repairs plastic seat cover white of pattern W.C including fixing device and Chromium plated nuts, complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed.

S&F in repair Stainless steel plate rack (utensil rack) of size ( 600mm x 750 mm) and depth 300 mm made with 1.00 mm thick stainless steel sheet (AISI 304) provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repair stainless steel sink, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union with bowl internal size 550 mm x 400mm x 250 mm complete all as specified and directed.

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Refixing shutters in the same opening of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 X 125 mm double rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F for 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

M&L for Forming jambs, etc. to openings in CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

Providing and fixing factory made UPVC white colour Sliding Window Three Track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) Window profile with hollow section with multi chamber, Frame (108mm* 45mm), sliding Sash (39mm *58mm). Sliding mesh sash (39mm* 58mm) Sliding Interlock (One vertical length in each shutters) (45mm* 35mm). Glazing bead (20mm* 18mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 ± 0.2mm thick galvanized steel frame (32mm *13mm), 2 Nos, Sliding Sash (29mm*19mm), Profile to be inserted in required profile, frame will be fixed to the wall with 8mm*100mm long fasteners incl Hardware: Touch Lock of zinc alloyed (White powder coated), steel roller system, glazing and other connected accessories complete all as specified and directed by Engineer- in Charge. Note:1. Glazed shutters of float glass thickness not less than 5.00 mm and wiremesh shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing in repair factory made uPVC white colour fixed glazed window/ ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as specified and directed. Note:1. plain/figured glass thickness not less than 4.00 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for Making good under cills or over arches, lintels and bressummers including all pinning when necessary (in CM 1:6)

Supply and fixing /fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick coloured PVC board laminated sheet complete all as specified and directed.

Supply and fixing /fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick plain PVC sheet complete.Make : Rajshree or equivalent all as specified and approved by Accepting Officer.

S&F in repair magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

S&F for continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed.

S&F for brass Locks for cupboard, grade I, size 50 mm, 2 levers with necessary accessories complete all as specifed and directed

S&F for 125 mm long, 12 mm dia SS Dash fasteners for door frames etc incl necessary drilling etc complete all as specified and directed.

S&F for 250mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F for 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F for 150mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F for 100mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F 200mm size SS tower bolt, fabricated type, fixed with screws complete all as specified and directed.

S&F in repair Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer, complete all as specified and directed.

S&F in repairs SS door stopper double 75mm long having rubber bush 25mm dia fixed to door shutter with steel screw complete all as specified and directed.

S&F in repairs 300mm, Helical door springs including roller and roller plate complete all as specified and directed.

S&F in repairs 250mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F in repairs 100 mm size SS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F in repairs 100mm size SS handle, fabricated type, fixed with screws complete all as specified and directed.

S&F in repairs 200mm size SS tower bolt, fabricated type, fixed with screws complete all as specified and directed.

S&F in repair for S S Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair Stainless steel tubing of 25 mm dia for curtain rod fancy type with brackets including end cap (wall to wall or flush to wall) for securing to curtain rod complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, aluminium frame, concrete or brick surrounds, glazed with puty or fixed with beads complete all as specified and directed.

S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed.

(i) Supply and applying for component elastomeric acrylic polymer modified cementitious water proofing coating smart care damp block 2K Suprema of Asian make in 2 coats over the prepared surfaces (wall/ sunken floors) at a coverage of 1.5 Kg/Sqm. The coating shall have 80% elongation as ASTM D412 resisting 5 Bars hydro static pressure as per D1N 1048 reduction to rapid chlorides shall be 70 as per D1N 1048, crack bridging upto 1.2m as per ASTM 45485. The coating have food grade certificate from laboratories like CFTRI. The max ratio of coating shall be 2 Part of powder & 1 part of liquid within any water addition in the mixing etc complete as per manufacturer specifications. (ii) After the surface dried, plaster the surface with CM 1:4 15mm thick. (iii) Demolition of lean concrete with existing treatment, taking out removing from site and M& L for PCC 1:5:10 for filing of sunken portion is deemed to be included in the rates.

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Providing precast cement concrete (Type B1 1:2:4) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.

M&L for mild steel framed work such as grills, grates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding bolts etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 80mm thick M-40 grade factory made vibratory compected cement concrete rubber moulded, coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding, in leveling course, benching, mud stops etc, complete all as specified and directed

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water including removing of debries out side of MOD land complete all as specified and directed. Note :- Necessary scafolding upto four story will be provided by contractor and unit rate will be deemed including this aspect.

Taking down plaster from edges of RCC chajja or corners of columns where steel reinforcement coming out, fixing 15 mm size Wire netting of mild steel wire 1.60mm dia fixed with tinned tacks of wire staples and filling with 15mm thick rendering in CM (1:3 ) complete all as specified and as directed. Note :- Necessary scafolding upto four story will be provided by contractor and unit rate will be deemed including this aspect.

M&L for rendering 15 mm thick in cm 1:4 fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed. Note :- Necessary scafolding upto four story will be provided by contractor and unit rate will be deemed including this aspect.

M&L for rendering 15 mm thick in cm 1:6 on on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surface of ceiling and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two or more coats of Acrylic Smooth exterior paint of required shade applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. Note :- Necessary scafolding upto four story will be provided by contractor and unit rate will be deemed including this aspect.

M&L for two coats of oil bound distemper over chalk whiting on newly plastered surface of wall and cornices including preparation of surfaces complete all as specified and directed.

M&L for 1 mm thick wall care putty on external and internal wall over newly plastered surfaces/old decorated surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of wall and applying one coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of Ceiling and applying one coat of white wash on Ceiling surfaces complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of Ceiling and applying one coat of oil bound distemper on Ceiling surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat oil bound distemper over a one coat of chalk whiting primer complete all as specified and directed.

M&L for preparing old painted surfaces of wood or wood base materials of any description not otherwise described, surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surfaces of steel of any description not otherwise described, surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two or more coats of Acrylic Smooth exterior paint of required shade applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqmcomplete all as specified and directed. Note :- Necessary scafolding upto four story will be provided by contractor and unit rate will be deemed including this aspect.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coats of Acrylic Smooth exterior paint of required shade complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two or more coats of plastic emulsion paint of required shade , smooth finish over and including priming coat of primer over 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coats of plastic emulsion paint of required shade, smooth finish complete all as specified and directed.

M&L for preparation of existing new or old plaster surfaces including removal of existing treatment and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydroloc water proofing of make Asian on plaster surfaces complete all as specified by the manufacturer.

S&F in repairs bib taps (wall flange), fancy type, cast copper alloy with capastan head, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore pipe complete all as specified and directed. Make:- Jaquar cat Part No-FUS 29037 or equivalent as per approved make list.

S&F in repairs chromium plated fancy type angle valve for 15 mm bore size complete all as specified and directed. Make :- Jaquar cat part No-FUS 29053 or equivalent as per approved make list.

S&F in repair hand shower (health faucet) with 8 mm dia, 1 mtr long flexible long tube & wall hook complete all as specified and diretced. Make:- Jaquar cat part no.- ALD-573 or equivalent as per approved make list.

S&F in repair soap dish holder complete all as specified and directed. Make-Jaquar Cat part No. ACN-1131N or equivalent as per approved make list.

S&F in repair glass shelf 600 long complete all as specified and directed. Make :- Jaquar cat part no. CAN 1171N or equivalent as per approved make list.

S&F in repair two way angle valve/tap with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. Make: Jaguar Cat Part No.CON-041KN or equivalent as per approved make list.

S&F in repair overhead shower with 115mm long bend pipe on upper side, connecting leg & wall flanges, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed. Make Jaguar Cat No : OHS-CHR-1605 or equivalent as per approved make list.

S&F in repair brass CP bottle trap and making it fully leak proof by providing ‘M’ seal on joints complete all as specified and directed.

S&F in repair corner glass shelf with bracket complete all as specified and directed. Make:- Jaquar cat part No.ACN-1173 or equivalent as per approved make list.

S&F in repair tumbler holder complete all as specified and directed. Make:- Jaquar cat part no. ACN-1141N

S&F for counter top Basin size ; 610mmx415mmx160mm complete all as specified and directed. Make:- Jaquar-model-D' ARC Cat No-DRS-WHT-37601

S&F for floor mounted coupled wc bowl with cistern and UF soft close slim seat cover, hinges, fixing Accessories and accessories Set size 380X655X765MM P/S trap-250mm complete all as specified and directed. Make :- Jaguar cat part No. LYS-WHT-38751S250UFSMZ or equivalent as per approved make list.

S&F in repairs UF soft close slim seat cover white of W.C including fixing divice and Chromium plated nuts, complete all as specified and directed.

S&F in repairs complete PVC assembly/ Kit for single piece WC of any shape or make or capacity complete all as specified and directed.

S&F in repair stainless steel kitchen sink bowl type of bowl size 600 mm X 450 mm X 250 mm, 1 mm thick with plug washers and wastes ; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F in repair Towel ring chromium plated complete all as specified and directed. Make Jaguar Cat No : ACN-CHR 1121N or equivalent as per approved make list.

S&F in repair towel Rack 600 mm long with lower hangers stainless steel complete all as specified and directed. Make:- Jaquar cat part no.ACN-1181S or equivalent as per approved make list.

S&F in repair wall mixer 3 in 1 with provn for overhead shower with 115mm long bend pipe on upper side, connecting leg & wall flanges, quarter turn, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed. Make Jaguar Cat No : FUS-CHR-2928 or equivalent as per approved make list.

S&F in repair Brass Chromium plated HAND shower, swivel joints, complete all as specified and directed. Make Jaguar Cat No : SHA-CHR-1657 or equivalent as per approved make list.

S&F in repairs CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make:- Jaquar cat Part No: FUS-29023B or equivalent as per approved make list.

S&F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc complete all as specified and directed.

Supply & fixing in repairs of Aluminum powder coated grill of size 75x75x4 mm thick for windows, incl joining cleat, aluminium strip beading, necessary screws complete all as specified and directed.

S&F in repairs powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F stainless steel accessories suitable for kitchen cabinets as under :- (a) Stainless steel basket (Plain) of size 50cmx37cmx10cm/16cm or Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm or Stainless steel plate/ partition basket (11-13 division) of size 50cmx37cmx16cm or Stainless steel bottom full out of size 50cmx40cmx16cm in two tier, all made of 4mm thk SS wire or Stainless steel cutlery basket of size 50cmx37cmx10cm made of 4mm thk SS wire and bottom of SS perforated sheet and fixing with two nos Telescopic basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and directed.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specd and directed.

Schedule of Credit (MINUS) Rs. 47,866.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum

Shree Ram Enterprises (BID ID -3487724)

KHALSA BUILDER (BID ID -3487525)