NIT No. 20 2022 23 Item No.1

Specifications for Lab stations Make:- LABGAURD, THERMIC, KEWAUNEE, GD Labs Laboratory Stations will be modular and portable. The complete station will provide ease of chemical analysis. The stations will be water proof, chemical resistant and weather proof to reduce weathering effects and corrosion. The more details are as under; Work Top: - Work top will be made of 17 to 19mm thick Jet-Black Granite with chamfer moulding at the front & groove at the bottom to avoid chemical spillage on the modules or on the floor. Worktop will be fixed with the module by foam tape and all joints are sealed thru Epoxy sealant. Material of Construction: - Material of construction will be made of 1.2 mm best quality GI sheets as per IS:277 specifications. Under Bench Module: - Under bench module will be made of 1.2 mm GI sheets as per IS:277 specifications. The entire module is made up of GI panels and are bolted/rivetted for achieving maximum strength with high corrosion resistance. The shutters or doors are mounted to the modules by Soft close hinges with soft closing mechanism which are openable to 95 degree. Drawers are mounted with the ball bearing based soft touch telescopic slides which are sturdy & able to take load up to 45 kg. Dimensions will be as per drawings Frame construction: - Entire structure will be "C" frame type. 60 X 30 X 2 mm pipe is used for main frame structure. CO2 welded & finished with highly chemical resistant epoxy powder coating. Reagent Rack: - Reagent racks will be two tiers: Island Table: Top & Bottom rack 300 mm Clear space and outer 380 mm Overall height: 750 mm Electrical Trunking: - Island Table: Triangular Electrical Trunking of 200mmD x 120mmH Wall Table: Triangular Electrical Trunking of 120mmD x 120mmH Switch & Sockets: - North-West / Crabtree make: Electrical Socket with MCB 15amp with wiring Powder Coating: - Complete module & frame work are processed with multi-tank pre- treatment and finished with highly corrosion resistant 'Kansai Nerolac/equivalent' epoxy powder coating with minimum 100 microns thickness. HARDWARE FITTINGS: (As per attached layout) A) Hinges: - Hafele / Blum Barrel type butt hinges Soft close hinges with soft closing mechanism B) Handle: -SS304 Matt Finish D Handle / Aluminium Flush Handle. C) Screw: - All S.S. 304 Visible Screws. D) Lock: - Hafele / Hettich / Blum Make with pair of Keys. E) Drawer Channel: - Hafele / Blum or Equivalent Make common sleeve telescopic drawer slides – 45kgs . Ball bearing F) Utility Taps: -Epoxy powder coated brass taps. G) Eye Wash: -Portable Eye Wash with Single eye wash (2 Bar Pressure) H) Glass parts Holders : -Acrylic support Peg Board 750mm x 750mm with 30 PP pegs with SS collection tray.

Beyond