Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹64.3 LAccepted-AOC H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹69.2 L+₹1.8 L (2.74%)Rejected-AOC | L-2 | Rejected-AOC Other than L-1 | |
| 3 | L-3₹70.6 L+₹3.3 L (4.88%)Rejected-AOC | L-3 | Rejected-AOC Other than L-1 | |
| 4 | L-4₹70.9 L+₹3.5 L (5.26%)Rejected-AOC | L-4 | Rejected-AOC Other than L-1 | |
| 5 | L-5₹75.2 L+₹7.9 L (11.7%)Rejected-AOC | L-5 | Rejected-AOC Other than L-1 |
Tender Value
₹98 L
EMD Value
₹1.7 L
Closing Date
17 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Chandimandir
HQ CWE Chandimandir PIN 134107
CWE/KAS-27/2024-25 COMPREHENSIVE B/R AND E/M MAINT OF MD ACCN AND OTM ACCN AT MIL STN KASAULI UNDER GE KASAULI
2024_MES_659929_1
CWE/KAS-27/2024-25
Open Tender
Miscellaneous Works
Item Rate
270 days
GE Kasauli
Class C cate a(i)
9 documents required · 9 mandatory
₹1,000
GE Kasauli
₹1.7 L
18 Oct 2024
14 Jun 2024
19 Jul 2024
14 Jun 2024
17 Jul 2024
3 Jul 2024
14 Jun 2024 - 21 Jun 2024
Amount
Dismantling timber scantlings in unframed works 40 sq. cm and over in section, in any position complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing of rolled mild steel section Fe 410-W (Gde E- 250) quality A as in roof trusses (framed), trusses, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats gusset plate etc. complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing of Steel work in tubular trusses, purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade St.-240 complete all as specified and as directed by Engineer-in-charge.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing of pre-painted galvalume aluminium zinc coating GI based corrugated/ semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPA as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ clading to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing of Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed by Engineer-in-charge.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-in-charge.
M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall, parapet wall etc complete all as specified and directed, including demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed by Engineer-in-charge.
All as per Serial item no. 9.00 here-in-before but except stone
M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed by Engineer-in-charge.
M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.
S & F of coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4, complete all as specified and as directed by Engineer-in-charge.
S&F of Non-Skid coloured ceramic tiles 7 to 8mm thick (square/ ractangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed by Engineer-in-charge.
-ditto- as per item no 14.00 above but as in skirting incl 10 mm thick rendering in CM 1:4, complete all as specified and as directed by Engineer-in-charge.
S&F of Vitrified ceramic coloured tiles (of approved light shade) of size 600 mm x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 15 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
Material and labour for 18 to 20 mm thick Granite, machine cut (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking plateform and like in cement mortar pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:4 complete all as specified and directed by Engineer-in-charge.
Supply and fix factory made rubber moulded machine pressed coloured chequered cement concrete tiles of size 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20 mm thick screed bed in cement mortar 1:6, complete including dismantlig tile complete all as specified and directed by Engineer-in-charge.
M&L for Demolition of Concrete in ground floors and pavings n exc 15 cm in thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.
M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete as in sub base of flooring complete all as specified and as directed by Engineer-in-charge.
M&L 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels as in plinth protection, finished even & fair surfaces without using extra cement complete all as specified and as directed by Engineer-in-charge.
Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for as in landing and shelves etc complete all as specified and as directed by Engineer-in-charge.
Material and Labour for providing Reinforced cement concrete 1:2:4, Type B1, using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, complete all as specified and as directed by Engineer-in-charge. Note : (Reinforcement shall be measured and paid separately)
Providing pre cast cement concrete type B1 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, with plain fair faces, including hamfers, weatherings, throat-ing etc. and setting in mortar 1:4 complete with joints to match complete all as specified and as directed by Engineer-in-charge.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete complete all as specified and as directed by Engineer-in-charge.
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engineer-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engineer-in-charge.
M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and smooth without using extra cement complete all as specified and as directed.
M&L for two coat cement plaster (up to 12 m height including necessary scaffolding), on brick/ concrete surface of wall first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note: (WPC will be measured and paid seperately under respective item)
Supply only Water Proofing Compound complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement based paint over a coat of cement priming coat of any approved tint complete all as specified and as directed by Engineer-in-charge.
M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2 mm thick wall care putty over coat of chalk whiting primer complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old plastered or unplastered surfaces of walls and applying two coat of oil bond distemper of any approved tint over coat of chalk whiting primer after complete removal of existing surface complete all as specified.
M&L for preparation of old plastered or unplastered surfaces of ceiling and applying two coat of cement base paint of any approved tint after complete removal of existing surface complete all as specified and as directed by Engineer-in-charge.
M&L 3mm thick wall care putty on wall complete all as specified and as directed by Engineer-in-charge.
M&L 3mm thick wall care putty on ceiling complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old painted wooden surfaces of any description position and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old painted steel surfaces exc 10cm in width or girth and appling one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc 4 sqm each complete all as specified and as directed by Engineer-in-charge.
Taking down shutters of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-charge.
Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified and as directed by Engineer-in-charge.
Taking down shutter of any description n. exc 1.0 sq.m each complete all as specified and as directed by Engineer-in-charge.
Taking down and refixing in same location after making necessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed by Engineer-in-charge.
Supply and fixing of second class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 35mm thick, 2nd class Hardwood, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing Second Class Hardood, 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and as directed.
Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed by Engineer-in-charge.
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm single side prelaminated PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, all as per specification complete all as specified and as directed by Engineer-in-charge.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded prelaminated PVC sheet on the front face & 4mm thick prelaminated PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge.
S&F of Anodised aluminium frame powder coated (50micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-charge.
S&F anodised aluminium powder coated door shutters (thickness of powder coating not less than 50 micron), fabricated out of aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges anodised aluminum snap beading screws etc, complete all as specified and as directed by Engineer-in-charge. (Note : S&F of Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately under this Sch).
S&F of anodised aluminium powder coated (thickness of powder coating not less than 50 micron) three track sliding window/ Cupboard frame of size 45.2 x 35 x 1.3mm and window/ Cupboard shutter of size 37.5 x 15 x 1.6mm with one or more rebates including joining cleat for fixing and self locking devices of approved quality in each shutter, handles etc complete all as specified and as directed by Engineer-in-charge. (Note: quoted rate deemed to be included for self locking devices)
S&F anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified and as directed by Engineer-in-charge. (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately)
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-charge.
S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engineer-in-charge.
S & F in repair Welded steel wire fabric (weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth, not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engineer-in-charge.
M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with aluminium frame work complete all as specified and as directed by Engineer-in-charge.
S&F of sheet glass 5.5 mm thick glass plain sheet ordinary quality in square exc 0.5 sq. m in each pane to be fixed in aluminum frame complete all as specified and as directed by Engineer-in-charge.
S&F of Mortice lock, 4 levers, brass, vertical type of size 100mm, fixed in repair complete all as specified and as directed by Engineer-in-charge.
Supply and fixing of butt hinge, ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed by Engineer-in-charge.
Supply and fixing of stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing of 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 complete all as specified and as directed by Engineer-in-charge.
S&F of Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing of 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 complete all as specified and as directed by Engineer-in-charge.
S&F of 150mm Aluminium handles, cast type, anodised, fixed complete all as specified and as directed by Engineer-in-charge.
S&F of 100mm Aluminium handles, cast type, anodised, fixed complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing of 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 complete all as specified and as directed by Engineer-in-charge.
S&F of 3mm thick frosted or figured on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.
Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge.
S&F GI metal suspended ceiling system, GI lay in plain of 600x 600x 0.5mm (REGULAR) edge tiles in globel white colour to be laid on strong 24 mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed. Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/ last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mm x 600mm module. Cut cross tees longer than 600mm required independent support. 600mm x 600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres.
(ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x 37x 25x 1.6mm and level clip in dimensions of 85 x 30 x 0.8mm with 4mm GI wire complete all as specified and as directed.
M & L for 4 mm thick Non asbestos fibre cement building boards fixed in repair or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer-in-charge.
Dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified and as directed by Engineer-in-charge.
M&L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sqcm and not exc 13 sqcm complete all as specified and as directed by Engineer-in-charge.
M&L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 3 sqcm and n exc 6 sq.cm complete all as specified and as directed by Engineer-in-charge.
Dismantling boarding, any description, fixed any position with nails complete all as specified and as directed by Engineer-in-charge.
S&F of 18/ 19 mm thick block boards / veneered particle boards, grade 1 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber framework complete all as specified and as directed by Engineer-in-charge.
Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.
S&F in repair of 25 mm dia curtain rods, mild steel wall thickness .80 mm, powder coated with fixing metal ornamental holder and side finials (in pair for each door and window) as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified and as directed by Engineer-in-charge.
supply & fixing in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.
supply & fixing in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified and as directed by Engineer-in-charge.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.
S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.
S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-charge.
S&F in repair 15mm bore, CP, fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms) complete all as specified and as directed by Engineer-in-charge.
S&F in repair 15mm bore angle cock, CP, fancy type, with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms) complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and as directed by Engineer-in-charge.
S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge.
S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-charge.
Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and as directed by Engineer-in-charge.
Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and as directed by Engineer-in-charge.
Supply and fixing of 500 litres capacity rotational moulded polyethylene water storage tanks ISI marked (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.
Supply and fixing of 1000 litres capacity rotational moulded polyethylene water storage tanks ISI marked (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.
Taking up or down steel water tubing of 15 mm bore and connections including all fittings, fixed in any position complete all as specified and as directed by Engineer-in-charge.
Taking up or down steel water tubing of 20 mm bore and connections including all fittings, fixed in any position complete all as specified and as directed by Engineer-in-charge.
S&F 15 mm tubes, medium grade, galvanised with all fittings; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
S&F 20 mm tubes, medium grade, galvanised with all fittings; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
S&F of magnetic steel stopper catcher holder for cup board of approprite shape and size complete all as specified and directed by Engineer-in-charge.
M&L for PVC edge strip of 18/ 19 mm wide, colour and pattern as approved fixed with adhesive complete all as specified and directed by Engineer-in-charge.
S&F in repair sheet glass self asembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail complete all as specified and directed by Engineer-in-charge.
S&F in repair of 600mm x 450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed by Engineer-in-charge.
S&F in repair Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed by Engineer-in-charge.
S&F in repair of 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair of 15 mm dia Brass CP mixer for WHB/ sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair of 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding fixing bolts, flushing cistern and flush pipe), fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair of Vitreous china squatting pan, "Orissa pattern" of size 680 x 470 mm white with integral foot rests (excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan complete all as specified and directed by Engineer-in-charge.
S&F in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-charge.
S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified and as directed by Engineer-in-charge.
S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). complete all as specified and directed by Engineer-in-charge.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge.
S&F in repair Stainless steel plate rack of size 24" X 36" X 10" made of 1 mm thick salem stainless steel sheet grade SS-304 with shelves, hooks and railing to keep plates vertically and horizontally, including necessary fixing arrangement complete all as specified and directed by Engineer-in-charge.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed by Engineer-in-charge.
S&F 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engineer-in-charge.
Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer-in-Charge.
Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC casing-n-caping of any size/ dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-
One light / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One two way point controlled by two, two way switches 06 Amps complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 121.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 121.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/ 16 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-
One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 124.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 124.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
Supply & fixing switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing of socket outlet 3 pin, 06 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply and fixing bell push flush type , 06 amps , 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and as directed by Engineer-in-charge.
Supply & fixing switch piano flush type, 06 Amps single pole, two way, 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repairs LED mirror light 10W, of two feet length, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs of 9/ 10 W LED bulk head luminairies incl LED light with clear prismatic diffuser, driver holder connecting up with three core flexible copper conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs wall mounted decorative fancy light fitting with single glass and brass base suitable for 14 watts LED lamp including one number LED lamp 14 watt of coolday/ warm white of base E-14/ E-27/ B-22, fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge.
Supply & fixing of ceiling rose, 3 phase, PVC/ polycarbonate isolated body complete all as specified and as directed by Engineer-in-charge.
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and as directed by Engineer-in-charge.
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 4.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed by engineer-in-charge.
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed by engineer-in-charge.
Note for Serial Item No. 140.00 & 141.00 : 1. Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. 2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. cutting/ chases in wall including making good of the surface shall be deemed to incude in the quoted rates.
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and as directed by engineer-in-charge.
Supply and fixing sheet metal enclosure, double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/ colour washing/ distempering etc to match the existing disturbed surfaces complete all as specified and as directed by engineer-in-charge.
All as per Serial Item No 143.00 but of 08 way SPN
All as per Serial Item No 143.00 but of 12 way SPN.
S&F in repairs MCB, SP, AC, 240 volts, B curve of capacity 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB, SPN, AC, 240 volts, C curve of capacity 20 Amps to 32 Amps 10kA and making connections with suitable thimble complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB, SPN, AC, 240 volts, C curve of capacity 40 Amps to 63 Amps, 10kA and making connections with suitable thimble complete all as specified and as directed by engineer-in-charge.
Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP-43 & IK 09 protection including provision of four pole 100 Amp isolator as incomer and MCBs of cap 20 to 40 Amps as outgoing with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB 4 Pole 'C' series 63 amps capacity AC 415 V, 10kA complete all as specified and as directed by engineer-in-charge.
M&L for taking down unserviceable geyser of 25/ 50 ltr capacity from the site after disconnecting the water connection, electric connection, opening the geyser assembly and de-scaling the deposits in the inner container and outlet water pipe set complete all as specified and as directed by engineer-in-charge. Note:- 1. Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. 2. spare parts of gyser other than mentioned above shall be measured and paid for separately under respective items of schedule ‘A’ here-in-after.
Supply & fix in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers complete all as specified and as directed by engineer-in-charge.
Supply & fix in repair of thermostatic switch 11" long ISI marked complete with electric connection suitable for geyser any Make complete all as specified and as directed by engineer-in-charge.
Supply & fix in repair of geyser element 1.5/ 2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and as directed by engineer-in-charge.
Supply and fix Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as specified and as directed by engineer-in-charge.
Supply & fix in repairs 15mm dia PVC connection 450 mm long, suitable for hot water supply, complete with 2 Nos of brass nuts complete all as specified and as directed by engineer-in-charge.
Supply & fix in repairs 15mm dia PVC connection 450 mm long, suitable for cold water supply, complete with 2 Nos brass nuts complete all as specified and as directed by engineer-in-charge.
Supply & fix in repairs of Zebra fastner of size 12 x 100 mm complete all as specified and as directed by engineer-in-charge.
S&F in Replacement of Exhaust Fan 250 mm plastic body, 1400 RPM with air delivery 1050 CMH, complete all as specified and as directed by engineer-in-charge.
S&F in Replacement of Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH, complete all as specified and as directed by Engineer-in-charge.
S&F in repair self ballasted LED Retrofit Bulb 12 Watt with PBT body shell, 5 Star and PC diffuser 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) complete all as specified and as directed by Engineer-in-charge.
Taking down carefully unserviceable tube light/ mirror light/ building security light/ bulk head/ recess light/ Decorative light/ Post light fitting of any type and size and making good the disturbed surfaces/ walls etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repair/ replacement to existing tube light fitting of any capacity with LED tube light fitting 18/ 20 W, (single Side Connection) with rechargeable emergency invertor LED batten with battery back up of Lithium Ion battery with charging time 8 hours-10 hours and back up time upto 4 hours including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing recess/ surface/ suspended mounting 36W Ultra modern designed architectural 2 x 2 LED luminaire which provides soft light and glare free symmetrical illumination, including all ace ssories for fixing in false ceiling/ ceiling/ in hanging position complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement to existing lamp of any capacity with LED lamp 9/ 10 watt complete all as specified and as directed by Engineer-in-charge.
Supply and fix post top light fitting with LED 20 watt post top light fitting AC outdoor type with decorative post top for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and 20 watt LED lamp complete all as specified and as directed by Engineer-in-charge.
S & F Recess mounting ceiling fitting 1' X 4' LED 36/ 40 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver Suitable for Armstrong and Grid ceiling, PF min 0.95 complete complete all as specified and as directed by Engineer-in-charge.
S & F in repair/ replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as specified and as directed by Engineer-in-charge.
S & F in repair/ replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as specified and as directed by Engineer-in-charge.
S & F Recess mounting ceiling fitting 1' X 1' LED 18/20 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser, Separate HPF driver, Suitable for Armstrong and Grid ceiling, PF min 0.95 complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of PVC Plug Top, 6 amps complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of PVC Plug Top 16 amps complete all as specified and as directed by Engineer-in-charge.
S&F in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/ colour washing/ distempering etc to match the existing disturbed surfaces complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair modular socket 16 A, 6 pin, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair modular socket 03 pin 06 A, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair modular switch 16 A, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair modular switch 06 A, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair white cover plate with frame 2 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair white cover plate with frame 3 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair white cover plate with frame 4 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair white cover plate with frame 6 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair white cover plate with frame 8 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair metal flush box 1/ 2 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair metal flush box 3 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair metal flush box 4 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair metal flush box 6 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair metal flush box 8 module complete all as specified and as directed by Engineer-in-charge.
Supply & fix in repair 15mm dia, 304 grade stainless steel connection pipe, 450 mm long , suitable for hot & cold water supply, complete with 2 Nos brass nuts complete all as specified and as directed by Engineer-in-charge.
Supply & fix in repairs 15mm dia, 304 grade stainless steel connection pipe 900 mm long, suitable for hot & cold water supply, complete with 2 Nos brass nuts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repalcement distribution modular box with mcb protection Execution (pole) 4 Module and including 20 Amps rating MCB, single pole, AC, 240 volts with Specification IS:13032 & IS:8623, Dimension approx 46.5 x 42.8 x 26 Centimeters, PVC Plastic Material, White Color mounting on wall surface, complete all as specified and as directed by Engineer-in-charge.
Sagar Builders
Durga Construction
R. P. Suppliers and Construction Co.
Rajesh Agencies
PAWAN KUMAR
M/S SHANTI SARUP DINESH CHAND
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .