CONSTRUCTION OF MODAL CUM SAMPLE ROOM FOR GE P ROJECT VASCO

Amount

Excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or in drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated materials and getting out the soft / disintegrated rock within a lead of 50m, complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded crushed trap stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for precast cement concrete block masonry in 1:5:10 with solid blocks,exc 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm, complete all as specified and directed.

Material and labour for 40mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded crushed trap stone aggregate) as damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L in filling under floors, spreading and leveling in layers n.exc 25cm thick and well ramming including watering as required, complete all as specified and directed.

M & L for hard core of n. exc 63mm, deposited, spread and levellened in layers n. exc 15 cm thick, watered and rammed to a true surfaces, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded crushed trap stone aggregate) in sub base of flooring, complete all as specified and directed.

M & L for15 mm thick Screed bed or bedding layer or mortar in CM (1:6) for laying floor finishes, complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.

M& L for rendering 10mm thick backing coat on brick/ concrete surfaces or wall surfaces other than fair face of brickwork in cement mortar 1:6 and finishing the surface, complete all as specified and directed.

M & L for Kota stone slab 15mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 3mm wall care putty on wall, complete all as specified and directed.

M&L rendering 15mm thick on brick/ concrete surfaces or wall surfaces other than fair face of brickwork in cement mortar 1:6 and finish the surface even and smooth, without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on brick/ concrete surfaces on wall surfaces in two coats 10mm IN Cm 1:6 as base coat and 5mm in Cm 1:4 as finishing coat mixed with WPC and finish the surface even and smooth, complete all as specified and directed. Note: water proofing compound will be measured and paid seperately.

Supply only integral water proofing compound.

M&L for preparing new plastered wall surface and applying two coats of oil bound distemper over a coat of oil base primer, complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of anti fungal paint apex ultima or equivalent over a coat of acrylic emulsion primer on wall complete all as specified and directed.

Supply and fix second class hardwood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

Material and labour for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces, complete all as specified and directed.

M&L for powder coated aluminium frame with shutter for doors, windows ventilators with one or more rebates including jincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) suitable handle/lock (1 no.) complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing within oil putty in square n.exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 100mm mild steel butt hinges medium weight cold rolled, complete all as specified and directed.

S&F 100mm anodised aluminium barrel tower bolt of extruded section, complete all as specified and directed.

S & F Handle 100mm Extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed.

S&F 200mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clops of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed.

S & F anodised Aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with min anodic coating of grade AC 15) of approved design/ pattern, with approved standard section fixed to the existing window frame with CP brass/ stainless steel screw @ 200mm c/c , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in Charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft disintegrated rock, complete all as specified and directed.

M&L for 100mm thick Cement concrete 1:3:6 type C-2,(using 40mm graded crushed trap stone aggregate) for plinth protection including cutting of joints and filling it with 1part of heated bitumen and 3 part of sand, complete all as specified and directed.

M&L precast reinforcement cement concrete (1:2:4) type B1 (using 20 mm graded crushed trap stone aggregate) as in lintels including necessary formwork etc but excluding reinforcement, complete all as specified and directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick. complete all as specified and directed.

M & L for RCC slab type B1 1:2:4 (20mm graded crushed trap stone aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like, complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S & F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length complete all as specified and directed.

S&F steel work in tubular trusses ,rafters,purlins etc including special shaped washers, posts, purlins etc complete using ERW or induction butt welded tubes conforming to IS-4923-1968 grade St-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for two coat synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces over 10 cm width or girth, complete all as specified and directed.

Material and labour for 4mm thick non-asbestos fiber cement building boards for false ceiling fixed with and including anodised aluminium snap grid frame work (size of grid 605mm x 605mm), fixed with hangers (upto 1200mm length) complete all as specified and directed.

Fixing only steel windows or ventilators, fixed type with glazing bars

M & L for Point wiring with PVC insulated unsheathed FRLS multi stranded copper conductor cable of size 1.5 Sq mm, for phase red, neutral black and earth green drawn in and including, PVC medium grade conduit not less than 25 mm dia ivory colour concealed in walls/roof with GI sheet metal sunken modular switch/Terminal box 1.2 mm thick and Modular plate and brass screws with cup washers white cover complete Note : (1) Rate is inclusive of Cutting/chases of wall/floor/ceiling

(a)One light point controlled by one way switch

(b) One ceiling /exhaust fan point controlled by one switch.

(c) One 3 pin 5 amp socket out point on the same board with other switches.

(d) One3 pin 5 amps socket out let point on independent board

All as per same in item No 43 above but for one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire complete.

S &F modular Switch piano flush type single pole one way 6 amps complete.

S &F modular Switch piano flush type single pole one way 15 amps complete.

S &F modular Socket out let 2 in one, 5/3 pin 6 Amp. complete .

S &F modular Electronic regulator 100 Watt step type. 2 module complete .

S &F Ceiling rose, polycarbonate body three terminal complete.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded aluminium heat sink envinromentel friendly Energy efficient ready to use pack ,1x20 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block etc.with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size & suitable for and mounting clamps etc.complete all as specified and directed. make- WIPRO /ORIENT /PHILIPS.

S & F LED Security/Street light fittings 25 Watt wall mounting type extruded metal/aluminium body, and electronic LED driver, ect. with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size etccomplete all as specified and directed. . Make- WIPRO /ORIENT /PHILLIPS.

Fabricate,supply & fix GI pipe bracket 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 25w security light fitting.

S&F Energy efficient BEE five star rated BLDCceiling fan, 1200 mm sweep and connecting up including provision of three core flexible copper wire of size 23/0076 from ceiling rose to ceiling fan complete. -Make :Wipro /Orient/Havells.

S&F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 1.5 Sqmm, earth continuity conductor of size 1.5 Sqmm to be drawn through and including PVC conduit fixed on walls/roof.Notes:- (i)Two wires of 1.5 sqmm and one wire of 1.5 sqmm PVC conduit shall be measured as one unit.

S&F MCB DB made of sheet steel, powder painted with bus bar 100 A, neutral link, earth bar and Din rail , 230 Volts SPN with 8 way Double door IP-43-IK09 protection grade. complete all as specified and directed.

S&F MCB DB made of sheet steel, powder painted with bus bar 100 A, neutral link, earth bar and Din rail , 230 Volts SPN with 4 way Double door IP-43-IK09 protection grade.complete all as specified and directed.

S&F MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating. complete all as specified and directed.

S & F ISI marked RCBO 40 A, 30 mA, 230 V DP for AC applications, conforming to IS 12640 (Part-2)- 2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters complete all as specified and directed.( for incoming SPN 8 way DB )

S & F ISI marked RCBO 32 A, 30 mA, 230 V DP for AC applications, conforming to IS 12640 (Part-2)- 2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters complete all as specified and directed.( for incoming SPN 4 way DB )

M & L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less than 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (Part-I).

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm, 2 core.

M & L for Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA.

Excavation in tranches not exceeding 1.5 m wide and 1.5m deep in soft/ disintegrated roack.

M& L for PCC (1:4:8) type D2 (using 40mm ggraded stone aggregate) as in foundation etc

M & L Precast cement concrete solid Block masonry in PCC 1:3:6 type C1, 20mm graded agg exc 10cm in width and setting in CM 1:4 complete.

M& L for Rendering 15mm thick in CM 1:4 of fare faces of brick work or concrete surface, complete all as specified.

Returing filling in including spreading. Levelling, watering and well ramming in layer not exceeding 25cm thick for soft/ disintegrated rock.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified atec complete all as specified and directed.

S & F bib taps chromium plated finish with cruth or butter fly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified.

Surace excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard dense soil.

M & L Removing excavated material to a distance n. exc 200 mtr but exc. 250 mtr and depositing where directed at a level n exc 1.5 mtr above starting point.

Supply stacking and laying including spreading in layers of uniform thickness 15 cm with approved good earth as approved by GE obtained outside of MoD land

Supply stacking and laying including spreading to a uniform thickness of 10cm with approved sweet soil as approved by GE obtained outside of MoD land.

Supply, stacking and laying including manure mix sweet soil to a uniform thickness of 50mm including troting the soil with insecticides.antitermite powder/ solution (approx 1.5 kg of dust and 25ml of duresban per 20cm of mixed soil) and spreading, leveling, shaping etc all as specified.

Supply and planting/laying carpet grass for lawn including watering daily manuaring and maintianing upto maintenance period.

Supply and planting of best quality hedge plants including watering daily and maintenance period.

Supplying and planting of best quality flowers plants including water daily manuaring and maintaining upto maintenance period.

Ixora

Hibiscus

Lantana

M/s. R.S. LAWANDE

M/S P S BABU

K M SUBHANAIAH

M/S Kartik Enterprises