Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.8 LAccepted-AOC | L-1 | Accepted-AOC lowest bidder for the work. | |
| 2 | L-2₹5.0 L+₹14,700 (3.00%)Rejected-Finance LIG 10 VIVEK NAGAR NAVIBAGH BHOPAL MADHYA PRADESH 462038 | BHOPAL | MADHYA PRADESH | 462038 | L-2 | Rejected-Finance other than the lowest bidder. |
Tender Value
₹5 L
EMD Value
₹10,000
Closing Date
29 Apr 2024, 6:00 pmClosed
Col Pawan Kumar CWE Bhopal
Headquarters, Commander Works Engineer, Bhopal, Military Engineer Services, SI Line, Bhopal, Pin Code - 462001 (Madhya Pradesh)
COMPREHENSIVE MAINT OF EOT CRANE, PASSANGER/GOODS LIFT AT HQ 21 CORPS AT GE DRONACHAL
2024_MES_636045_4
83867/E8
Open Tender
Civil Works
Item Rate
180 days
DRONACHAL
AS PER NIT CONDITION
7 documents required · 7 mandatory
₹300
Yes
GE Dronachal
₹10,000
Yes
18 May 2024
4 Apr 2024
1 May 2024
4 Apr 2024
29 Apr 2024
11 Apr 2024
4 Apr 2024 - 11 Apr 2024
Amount
Comprehensive, preventive and periodical maintenance of Lifts (04 Nos) by OEM or authorised partner of OEM [Make: KONE Elevator India Pvt Limited] of 8 passengers (544 Kg)/500 Kg goods lifts - O4 Nos (details mentioned as under) each with travelling speed of 1.0/1.5 metre/sec installed at 21 Corps Main Building under GE Dronachal, having SS car enclosure, microprocessor controlled with VVF drive, simplex dual controlled operation, with/without attendant, automatic sliding SS doors, automatic rescue device including maintenance free battery, 3D infrared sensor to the full height of door, built in announcing system, in reliable, safe, technical sound and efficient manner using latest techniques by regularly examining, lubricating and adjusting the mechanical and electrical driving equipments, governor sleeve, shaft assembly, bearing/contact/governor/jaws, car & hall mechanical buttons, car & hall position indicators, car direction indicators and all other car and landing signal/fixtures deflectors, car and counter weight guide rails and buffers, etc including replacement of all defective parts other than those, mentioned in (Schedule A) BoQ item No. 2.00 i.e. wires, lugs, nut bolts, screws, hand rails, light luminaries. ventilating fan, holder, control wires, COP unserviceable buttons, switches, thimbles, lubricant, gear oil, air cord. landing wheel air, cord wheel, rubber bush, rail guide shoe, all types of control panel & all type of their cards and software i.e., Air commutation card, TTU card, computer card, hardware card, PCB, etc including welding, cutting, drilling etc as and when required complete all as specified and directed for the following lifts: - (a) 8 Passengers/544 Kg. 1.5 m/s, G+3 Floors - 1 No. (1 No. lift with machine room, MES No 676/7009/LF-13, Kone Elevators Sr. No 103890818) (b) 8 Passengers/544 Kg, 1.5 m/s. G+4 Floors - 2 Nos. (Machine room less (MRL), MES No 676/7011/LF-13, Kone Elevators Sr. No. 104076300 & 1 No lift Machine room less (MRL), MES No. 676/7010/LF-13, Kone Elevators Sr. No. 104076306) (c) Goods Lift 500 Kg, 1.0 m/s, G+4 Floors - 1 No. (With machine room, MES No. 676/7012/LF-13, Kone Elevators Sr. No. 1341240012)
NOTE: - (a) The work under this contract shall be carried out through OEM of the lifts or their authorised agents complete all as described in Sch, special conditions, particular specification, MES SSR and as directed by GE / Engineer-in-charge. (b) The Contractor shall enter into a MOU with the OEM for the maintenance of lift. The MOU for the post warranty/ post defect liability period between the contractor and OEM shall also be submitted prior to the commencement of work. (c) The cost of all replaced defective parts and spares, other than mentioned is deemed to be included in quoted unit rates and nothing extra will be paid to the contractor on this account. (d) The comprehensive/preventive/periodical maintenance includes weekly, fortnightly, monthly, quarterly, half yearly inspection testing as per service manual or as given in PS. The inspection/ test report will be submitted to Engineer-in-charge before payment of RAR. (e) The complete records of replaced spare parts, other than mentioned will be maintained and will be produced to Engineer-in-Charge on monthly basis or as and when asked to produce the same. (f) The AMC shall become in force immediately after issue of work order No 01. The lifts will be handed over to contractor in as and when condition and cost of all kind of repair/replacement of item to make it fully functional other than mentioned is deemed to be included in quoted unit rate and nothing extra will be paid to the contractor on this account. (g) If the contractor fails to carry out minor repair / replacement and to keep the lift in running condition within 04 hrs., the contractor shall pay penalty charges as under: (i) Upto 12 hours - ₹200.00 (ii) Above 12 hours and upto 24 hours - ₹300.00 (iii) Above 24 hours - ₹500.00 per day The decision of GE in these regards shall be final, conclusive and binding. (h) The cost of transportation (to and from) and other necessary equipment shall be arranged/brought by contractor to complete the job and nothing extra will be paid to the contractor on this account. (j) The contractor shall display the OEM/authorised agents of OEM mobile/contact no in each lift car & at lift lobby and update from time to time.
Supply, fixing, testing and commissioning if required, in replacement of the following spare parts suitable for 08 passengers/ 544 Kg lift of Make Kone Elevator India Pvt Ltd - including taking down of old/unserviceable Part complete all as specified and directed:-
Synchronization switch
Flat belt for permanent magnet gearless machine.
LED bulbs 3 watt with reflector.
KRD battery 12 V, 07 to 10 AH, Maintenance free for automatic rescue device.
Rail Oil.
Door drive.
Alarm Bell.
CPO card.
Recess mounted fan with noiseless 150 mm sweep
Surveying, estimating, repairing, testing and commissioning to the existing EOT crane of 2 Ton capacity, double girder box type (Make Cranex Ltd., Manufacturer Serial No. 201131, MES No.: -676/7012/CN-12) installed at new EME workshop including providing/ replacing/ repairing of missing or unserviceable parts, tightening of loose fasteners/bolts etc, checking for oil leakage, topping of oil in gear boxes, EHT thrusters, lubrication of crane/ wire ropes/ LT/ CT wheel bearings, wheel shafts, couplings, gears etc., checking of LT/CT/hoist motions, bearings, brakes, wire ropes etc. including making arrangement for carrying out load test of crane with 10% overload complete all as specified and as directed by the Engineer-in-Charge. Note: - (a) Testing of crane shall be carried out in presence of the rep deputed by the Accepting Officer. (b) The contractor shall visit the site with OEM or their representative for surveying, estimating the missing or unserviceable parts and assessing the requirement for providing/ replacing/ repairing to make the crane functional. (c) The rates quoted by the contractor shall be inclusive of all these aspects.
PRAGATI ELECTRICALS AND ELECTRONICS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .