8446 ADDITION ALTERATION AND REPAIR TO ROOF INCLUDING CEILING AND ASSOCIATED WORK OF A11 GALBATS BUILDING AT INS ANGRE UNDER GE NW KUNJALI ADDITION ALTERATION SPECIAL REPAIR TO ELECTRICAL REFURBISHMENT OF INTERNAL ELECTRICAL WIRING AND FITTINGS AT

Amount

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.

S&F for 1.50mm thick plain , galvanised mild steel sheeting in ridges , valley gutters,drip and other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and directed by Engr-in charge .

S&F for Hand rails, half round or other stock section , nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 290 (Gde-E-165) complete all as specified.

S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410 Gd E-250 all as specified .

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable flase ceiling, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed..

M&L Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed.

Rendering 20mm thick in two coats(15mm inner coat 5mm finishingcoat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions including necessary scafolding for high rise bldgs etc all as specified and directed. (Water proofing compound to be measured and paid for separately).

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling.

Supply only integral water proofing compound.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc.

M&L for preparation of surface, minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using smart care RP or epoxy mortar and applying high performance hybrid polyurea elastomeric waterproofing spray applied anti rood smart care hypertron pure liquid membrane with an elongation of 300% and tensile strength of more than 22 N/mm2 as per DIN 53504, shore A hardness of min 53 as per DIN 53505, CRACK BRIDGING ABILITY of 305 mm as per ASTM C1305. The system includesfinal base preparation, epoxy primer application and applying smartcare hyperton pure or approved equivalent in two with a minimum consumption of 2 Kg/Sqmt etc. Complete as per manufacturer spections etc including removing of existing waterproofing treatment complete all as specified and directed by EIC.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by EIC

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with ms clamps all as specified and directed.

S&F 160mm dia bore PVC (SWR) bends any radius

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified and directed.

M & L for taking down and refixing PVC tank on site alongwith float valve or fixing of new float valve if required

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed by Engineer-in-Charge

Taking down old U/S tube light fittings single / Twin ,Recess mount fitting , etc and making good the distrubed surface matching with existing surface all as per directed by engineer in charge.

Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces all as directed by engineer in charge all as specified

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC conduit not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One light point controlled by one switch

One Fan/bell point controlled by one 5A switch

One bell point controlled by one 5A switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board board

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One 5pin, 15 Amps switch socket combination on ind board

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 4 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One 5pin, 15 Amps switch socket combination on ind board

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sqmm 4 core.

M&L for submain wiring with 2 runs of 1.5 sqmm and 1 run of 1.5 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

M&L for submain wiring with 2 runs of 2.5 sqmm and 1 run of 2.5 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

M&L for submain wiring with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

M&L for submain wiring with 2 runs of 6 sqmm and 1 run of 6sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

S&F LED 22w round slim recess mounted type fitting DOWN LIGHT recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified by Engr-in-Charge.

S&F LED 2x1 BOX type fitting with 20 watt LED rod, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified by Engr-in-Charge.

S&F LED batten fitting with 20 watt LED rod, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified by Engr-in-Charge.

Supply and fix switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type

Supply and fix switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type

Supply and fix modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix FAN REGULATOR , modular type 1 way 120W 2 module 240 volts flush type

Supply and fix bell push, modular type 1 way 16 Amps 1 module 240 volts flush type

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete

Supply and fix bell ding dong, 230 volts, AC

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent in Havells/HPL (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S&F ceiling fan 1200 mm sweep 230 volt 50 HZ AC, having air delivery not less than 200cum/min, 350 rpm supply single phase incl down road as per site requirement and all conncted accessories incl taking down and submitting to MES store.

Supply and fix MCCB 4pole 100A, 16kA

MCB SP 6 - 32 Amps, 10 KA Rupturing capacity

MCB SPN 40-63 Amps, 10 KA Rupturing capacity

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm gi pipe light grade for protection.

S&F steel sheet enclosure double door type IP54 IK09 protection DB VTPN 8 way, 240 volts AC factory made, suitable for housing MCB TPN along with 200 Amps copper bus bar complete all as specified and directed

Supply and fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps

Supply and fix sheet metal enclosure with 2 pin and earth plug and socket complete with single pole MCB of 20 Amps all as specified & directed.

S& F copper tubing 25/20mm dia of legth (3.5 RM) alongwith draing line PVC type from AC to GF duly clamping (10RM) all as specified and directed.

Supply, fabrication, installation, testing & commissioning of LT Panel board / Feeder piller box, in door type, dust and vermin proof, made out of 3.15 mm thick CRCA sheet, front & back openable doors having vertical COPPER bus bar of capacity 1000 amps for phases and for neutral including powder coated RED Color painting, internal wiring with suitable size of stranded copper conductor cable, PCC foundation, supporting channels,cable termination,cable gland etc complete at West wall including taking down old panel all as directed and suitable to accommodate the following switch gears and meters :- INCOMER a) MCCB 630Amps 4pole,36 KA,Thermal magnetic - 1 Nos (Incomer) OUTGOING c) MCCB, Sinlge pole 63 Amps,18KA,Thermal magnetic - 3Nos (Out going) f) VAF meter class 1with CT's - 1 No g) indication lamps (R,Y,B) LED type - 1 set MAKE of MCCB : Schinder/ Legrand/Seimens/L & T

S&F LED track mounted track light fitting 20W LED, powder coated all as directed and specified as following: General Information: Beam angle of light source 120 ° Light source color 930 warm white Light source replaceable No Number of gear units 1 unit Driver/power unit/transformer Power supply unit Driver included Yes Optic type Beam angle 30° Optical cover/lens type Lens Luminaire light beam spread 30° Connection Track Protection class IEC Safety class II Warranty period 3 years EU RoHS compliant Yes Initial Performance (IEC Compliant): Initial luminous flux (system flux) 1510.4 lm Luminous flux tolerance +/-10% Initial LED luminaire efficacy 67.9 lm/W Init. Corr. Color Temperature 3000 K Init. Color Rendering Index >90 Initial chromaticity (0.422, 0.386) SDCM<3 Initial input power 22.3 W Power consumption tolerance +/-10%

S&F LED surface mounted track light fitting 12W LED, powder coated all as directed and specified as following: General Information: Beam angle of light source 120 ° Light source color 930 warm white Light source replaceable No Number of gear units 1 unit Driver/power unit/transformer Power supply unit Driver included Yes Optic type Beam angle 30° Optical cover/lens type Lens Luminaire light beam spread 30° Connection Track Protection class IEC Safety class II Warranty period 3 years EU RoHS compliant Yes Initial Performance (IEC Compliant) Initial luminous flux (system flux) 1510.4 lm Luminous flux tolerance +/-10% Initial LED luminaire efficacy 67.9 lm/W Init. Corr. Color Temperature 3000 K Init. Color Rendering Index >90 Initial chromaticity (0.422, 0.386) SDCM<3 Initial input power 22.3 W Power consumption tolerance +/-10%

S & F spot light 7W, warm white , Elegant fixed spot with a focused 36 degree beam angle, 3000k, efficacy >100 w/lm all as specified and directed.

S & F strip light LED Strip SKYCove 5M WW with driver all as specified and directed.

S & F LED bulb, 15W, warm white, 3000K, holder type al las specified and directed.

M & L for heritage pole lamps , including taking down old lights sand bursting and painting in heritage pattern , including replacing glass sheets and refixing the same

M & L for heritage hanging pole lamps , including taking down old lights sand bursting and painting in heritage pattern , including replacing glass sheets and refixing the same