Spl repair for re-wiring of bldg No P-273 (A Coy Cook House) P-304, P-306, P-307, P-308, P-309, P-311 P-312 (Unit MT), P-291, P-292 P-295 P-297 (Single JCO living and Addn/Altn of toilet block of Bldg No T-51 at AFTC AGE BRII GE WEST

Amount

Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

(d) One two way point controlled by 2 way switch 5 amps.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 2.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 16A Indepentent board complete all as specfied & directed.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in box of 1.6mm thick including one coat of synthetic enamel black paint fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for One light/fan/bell point controlled by one way switch 5 amps.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in box of 1.6mm thick including one coat of synthetic enamel black paint fixed fixed with brass screws and cup washers including single core stranded FRLS copper conductor 2.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15 A Indepentent board complete all as specfied & directed.

S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.

S&F of Modular socket outlet 6 A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F of Modular socket outlet 16 A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F of Modular switch 2 way 6A, 1 module, complete all as specified and directed.

S&F Modular Bell push 6A 1 module, complete all as specified and directed.

S&F of switch piano type 5 amps single pole one way complete all as specified and directed.

S&F of switch piano type 15 amps single pole one way complete all as specified and directed.

S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

Supply, laying and drawing submain wiring in PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Supply, laying and drawing submain wiring in PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 4.0 sqmm (Main Cable and neutral) and one run of IC x 4.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, of size 16.00 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete including connection all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing after repair work, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, remote/electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F electric water heater, storage type steel body with heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV,connection pipe incl all PVC & CP connections all as directed by Engr-in-Charge.

S&F in repair bib taps 15 mm fency type with crutch or butterfly handle, screwed down screwed for GI pipe complete all as specfied & directed.

S&F in repair stop valve 15 mm fency type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for GI pipe complete all as specfied & directed.

S&F in repair GI tubing pipes galvanized medium class supplied and concealed in wall including making good the disturbed surface complete including fittings 15mm (1/2") dia complete all as specfied & directed.

Cutting of existing water supply main any size upto 25 mm for taking branch connection of size 15 mm incl insertion of Tee unegual all as required at site or directed by Engr-in Charge.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in repair of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of SPN MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 complete all as specfied & directed.

S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.

Supply and fixing in repair suspended linear LED lights fitting 28/30 W, 5700K , 220V, AC comprises of aluminium extrusion, end caps and clutch wire suspension kit for suspended mounting with driver, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.

Supply and fixing LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED lights fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down of existing/old tube light fitting complete all as specified and directed.

Supply and fixing in repair LED lights fitting 10 W , 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.

S & F of Fresh air ventilation fans of 250 mm sweep, speed 1200 RPM, Air delivery not less than 850 m^3 / Min, rated voltage 220-230, 50 Hz, Min two years warranty complete all as specified and directed.

Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing LED Building security light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L in repairs steel tubes bend 1.2 meter length of, size 40 mm bore, bend in shape 120 degree light grade, galvanised, with all fitting including clamp of suitable size nuts,bolts & washers and fixed complete to walls / ceiling /pole as required complete all as specified and as directed.

S & F LED light fitting 1X10W bulk head luminaires includin LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED B22 1x 12 W, 220V, AC LED Lamp decorative wall mounting light fitting fixture made up of Aluminum body including LED 12 watt, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Color Temperature-6500K, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F of electric bell Ding-Dong AC 230 Volt SP with brass screws and cup washers all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, frame and louvers, complete all as specified and directed.

Supply and fix exhaust fan steel body AC single phase 230 Volts of size 300 mm sweep with blades and frame and louvers also making opening in round or square shape as per site requirement complete all as directed and specified.

M&L for modular AC Box with 20A SP mini MCB, Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specfied & directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specfied & directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screws complete all as specfied & directed.

Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specfied & directed.

Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specfied & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specfied & directed.

S&F false ceiling of grid of galvanzed steel tee/ angle (power coated ) of grid size 600x600mm as directed comprising of main tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type, including ceiiling boards of size 595x595x 6 to 8mm thick calcium silicate Gypsum/ 595x595x 12 mm thickmineral fibre board designer tiles of approved firm fixed in position complete all as specified and directed.

Demolition of cement concrete (unreinforced)/lime concrete/sunken floor of any description and in any position not otherwise specifically provided for by mechanical means (like drill machine, Hilti, pneumatic chisel, etc) complete all as spd & directed.

M&L PCC 1:5:10 Type E-2 (using 40 mm graded stone aggregate ) in mass concrete for sunken portion of WC, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as sfd and directed.

M&L for Brick work with old size Sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed.

M&L for Brick work with old size Sub class 'B' bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specfied & directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl taking down plaster of any description complete all as specified (Payment for providing grooves shall be included in the quoted rate.)

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

S&F heavy duty double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specfied & directed.

S&F solid PVC Door Frame of size 50mm x 95mm made out of 5mm wood grain printed colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specfied & directed.

S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specfied & directed.

S&F SS Butt hinges type 100 mm long for PVC doors complete all as specfied & directed.

S&F aluminium anodized extruded bow handle fabricated type 125mm long complete all as specfied & directed.

S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specfied & directed.

S&F powder coated Anodised aluminium window and ventilator shutters, top hung and with provision of louvers without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specfied & directed.

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing removing serviceable to store and rubbish off the premises complete all as specified and directed.

M&L for 40 mm thick cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate as in sub bases complete all as specfied & directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for glazed ceramic coloured tiles (350x250x7mm/450x300x7mm ) thick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:4 rough to receive tiles complete all as specfied & directed.

M&L 20mm thick black granite of size in single pieces with full width of wall (tabled rubbed, polished and moulded) as in columns, steps, window cills and like laid over 15mm screed bed or plastering in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of granite including dismantling of stone slab complete all as specified and directed by the Engr-in-Charge.

S&F grating doom 100 mm dia of CP complete all as specfied & directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.

Supplying and laying of 20 mm external dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all plain and brass fittings in trenches/ walls including dismantling old GI pipes including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain & Brass CPVC SDR 11 fittings on walls/ceiling or laying in floors including plain fittings including dismantling old GI pipes complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level complete all as specfied & directed.

S&F110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level complete all as specfied & directed.

M&L for PVC (SWR) multi floor trap of 100mm dia,plain with grating including jointing with solvent cement complete all as specfied & directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specfied & directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified & directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified & directed.

S&F PVC (SWR) 110 mm junction single/double, (double T), equal or unequal complete all as specified & directed.

S&F PVC (SWR) 110 mm vent cowl complete all as specified & directed.

Supply and fabrication & fixing of cupboards, lower and upper cabints ( depth of 45 Cm up to 70 Cm) etc ,front side, bottom, top, and partions etc made out of 15-18 mm thick HDHMR board and back side 18 mm board (action tesa or equivalent ) with the front face shall be covered with laminate of high gloss from merino and the edges to be covered via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) Colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handles, etc as required complete all as specified and as directed including frame work etc all as specified and directed..

S&F TMT bars 10mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.

M&L for reinforced cement concrete (nominal mix) of Type B 0 1:2:4 grade (using 20mm graded stone aggregate) as in slabs supported on walls and beams, roof slabs landings, balconies canopies, deck slabs and the like including connected beams complete all as specified and directed.

M&L form work to soffits of suspended slab such as roof slabs, balconies, floor slabs, cover slab, shelves, landings and similar work including beams, not exc. 200mm thickness finished rough (horizontal or sloping) as specified and directed.

S & F 32 mm bore PVC (SWR) pipe single socketed in any length with rubber ring jointing with solved cement or adhesive laid in floor or walls or in floor complete all as specified and directed.

Supply and fix chromium plated single tubular towel rail 20mm dia, D type 60 cm long between flanges, including a pair of CP brass brackets complete all as specified and directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

Supply and fix chromium plated shower rose with shower arm rod complete all as specified and directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

Supply and fix in repairs 15 mm dia wall mixer , chromium plated brass fancy type with all connection sleeves, capstan head, scrwed down complete all as specified. Make : JAQUAR, KOHLER, MARC & HINDWARE.

Supply and fix for soap dispensor with glass bottle all as directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

Supply and fix for soap dish all as directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F in repair counter top vitreous china wash hand basin, oval/circular shaped excluding taps, waste pipe chain and plug and porcelain but including brackets, waste coupling complete all as specified and directed.Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F Vitreous China urinal with electronic flushing system, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F 15 mm dia Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified. Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified.Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F in repair Brass CP mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed. Make :- HINDWARE, Jaquar, Kohler, Marc & ESS

S&F in repair vitreous china single piece WC with softclose seat cover (PP), brass higes, fixing assessories set, cistern fittings, traps distance (MM) S-110, complete all as specified and directed Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

M & L for brass chromium plated bottle trap (with internal partition ) 32mm size with 250mm and 190mm long wall connection pipes & wall flange complete all as specified and directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

S&F in repairs 15 mm bore fancy type CP bras angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified & directed. Make : JAQUAR, KOHLER, MARC & HINDWARE.

M&L in repair rotational moulded polythylene water storage tanks1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level) complete all as specified & directed.

M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-1(using 20 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site complete all as specfied & directed.

S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin,crane gantries,rails and heavy bracket framing (Beam,angle,channel or flat section) including distance pieces,cleats etc,confirming to grade Fe 410 -W (GdeE- 250) quality complete all as specified and directed.

M&L for preparation of new or untreated surfaces two coat of synthetic enamel painting on new steel surfaces over 10cms width or girth over a coat of red oxide primer etc all as specified and directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specfied & directed.

M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40mm graded aggregates) in floors complete all as specified and as directed.

S&F 12mm thick frosted toughened glass as urinal partition fixed with stainless steel brackets & clamps complete all as specified and as directed.

S&F in repair 15mm dia bib taps, cast copper alloy chromium plated with capstan head fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specfied & directed.

RK TRADERS (BID ID -3126905)

Chandramauli Engineers Pvt. Ltd. (BID ID -3115945)