Providing 150mm Dia New Borewell with Submersible Motor and Water Supply Arrangements to the Urban Primary Health Centre at Subramaniya Nagar Godhavari Street in Division No 23, Suramangalam Ward Office

Amount

Geophysical Investigation charges including preparation of geophysical report as per TWAD Board type circular including all cost of transportation and handling charges etc.,complete

Supply and delivery of PVC casing pipe as per IS 12818 / 2010 for bore well including cost ang convayance of material and labour charge etc complete.

a). 250mm CS (10" Dia)

b). 180mm CS (7" Dia)

Drilling of 150mm(6") dia Vertical clear bores in Hard rock in any habitation any where in Salem District to any required depth as directed b y the officers concerened including labour charges for inserting M.S/P.V.C Casing pipes to any reauired depth , assembilling in the drilled hole including welding joints if necessary . Grouting the cassing pipes including conducting proper yield test at final depath (by provinding 90 ' V' Notch fitted in a formed channel and the correct yield at the time of free flow in the channel while flushing the bore after completion of drilling process should be ascertained of and reported )including Bore cover transportation. crew and fuel charges for rigs and supporting Vechicles from one place to another etc Complete and as directed by officers Concerned.

a). Up to 150m Below GL

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % (50 LPM x 175m)

Supply and delivery of 2.50sqmm flat type PVC insulated 3core copper cable confirming to IS694/1990 with ISI Marking suitable for submersible pump set etc complete.

Supply and delivery of following pipeline materials from approved company including all cost and conveyance etc.,complete

32mm Dia HDPE Pipe for Submersible Pump in Borewell Class-5. (1 MPa or 10 kg./cm2 pressure)

32mm Dia GI Bend

32mm x 25mm SS Collar

25mm HD Collar

25mm Door Check Valve

End Plate

MS Clampset

25mm Bore Clamp Nigal Golding - 12"

Nylon Rope for Bore-well

Labour charges for the erection of submersible pump set in bore well including fixing and joint submersible cable with proper clamps upto stater to require depth and also fixing of raiser pipes to the required depth valve erection clamp pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phase preventor, water level guard and laying and jointing the cable and twin earthing as per IS rules etc complete.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Reinforced Cement concrete 1:1.5:3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supplying and fixing in position best quality PVC soil / waste pipe (6KSC) of various size having ISI marks and providing leakproof joints including fixing to the wall PVC / Ms clamps etc., and making connection to all sanitary fittings, dismandling masonry / RCC works complying with standard specification.

a). 110mm PVC Pipe

b). 90 mm PVC Pipe

Supplying and fixing in position PVC special such as plain bend, plain tee, door tee, offsets, y-junction plain with various sizes best qualityconfirming to ISS and providing leak proof joints including fixing to wall and giving connection to the PVC soil stacks, dismandling the brick masonry or RCC floor or Roof slab and redoing dismandling portion to original condition

a). 110 mm PVC tee

b). 110 mm PVC elbow

c). 90 mm PVC tee

d). 90 mm PVC elbow

Internal Water Supply - CPVC Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

15mm dia

20mm dia

25mm dia

32mm dia

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. etc., complete as per standard specification

a). 32mm Dia

b). 25mm Dia

c). 20m Dia

Supplying and fixing in position GI union and flanges of heavy type of approved quality and good variety, of various sizes including necessary cutting threading of GI pipes for jointing the union and providing two coats of paint with good variety and approved quality of synthetic enamel paints over a coat of priming coat in case of pipe line above ground level and coat of tar in case of line below G.L for both internal and external water supply arrangements etc., complete as per standard specification

a). 25mm dia

b). 20mm dia

Supply and delivery of 2000 litres HDPE tank as per IS 1201/1996 including loading, unloading, transportation and labour charges for fixing the GI special for pipe connection including cutting threading and fixing etc., complete as per standard specification.

Supply and fixing of the Following Water Supply Internal Fittings etc, complete as per standard specification.

CP Wall Mixture Tap 3 in 1 system with Hand Showers

CP Two Way Bib Cock with Health Faucet

CP Shower Arm with Overhead Shower Rose

CP Angle Cock Tap

SS Elbow Action Tap of size 15mm

SS Heavy Duty Long Body Tap 15mm

SS Swan Neck Tap

Supplying and fixing of SS Sink of size 1200 x 550 x 180mm

Supplying and Fixing of Aluminiuam Dye cast Letters of approved size. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes

a). Aluminium Dye Cast Letters 9'' size

b). Aluminium Dye Cast Letters 6'' size

Selvam Infrastructures (BID ID -1287217)