Karnataka

AOC

Works

Buildings

Providing and fixing Wooden Partition and curtains, Providing chairs, Table and Storage unit to Chamber of Deputy Secretary to Government, Public Works Department(BMICP) Room No.323, 3rd floor, Providing Workstations, Partitions to Room No.228, 2nd floor and other allied works at Vikasa soudha ,Bangalore.

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹13.7 LCloses: 25 Mar 2026Closed

Timeline

Published18 Mar 2026
Closed25 Mar 2026
Awarded18 Mar 2026

Bids

1 Bid18 Mar 2026

#	Company	Amount	Status
1	RAMESH C R ₹9.9 Laccepted-aoc	₹9.9 L	accepted-aoc

Tender Value

₹13.7 L

EMD Value

₹34,500

Closing Date

25 Mar 2026, 10:45 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

Providing and fixing Wooden Partition and curtains, Providing chairs, Table and Storage unit to Chamber of Deputy Secretary to Government, Public Works Department(BMICP) Room No.323, 3rd floor, Providing Workstations, Partitions to Room No.228, 2nd floor and other allied works at Vikasa soudha ,Bangalore.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT34726

Reference Number

PWD/2025-26/BD/WORK_INDENT34726

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredAnnual turnover certificate along with UDIN

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

RequiredBid Capacity Calculation as per KW Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-1 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

Conditional tenders are not accepted.

The tenderer shall obtain the workdone certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal.

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

The bidder should be a reputed company registered as a Class IV and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

Agency Should upload Employees provident fund (EPF) & ESI registration certificate

The Tenderer should submit Latest GST registration certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs off all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labors deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

Bidder should upload the bid capacity calculated as per KW-1 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

The quoted rates by the bidder shall be EXCLUDING GST

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2020-21 to 2024-25 (b) Satisfactory completion as prime contractor at least one similar works to an extent of 50% of the cost of the work i.e. Rs 6.84 Lakhs

Work Done Certificate

Capabilities of Vendor

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 (a) achieved in atleast one financial years an average annual financial turnover of Rs. 13.67 lakhs

Audited CA Certificate of Annual Turnover

Financial Status

3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity-(AxNx2.5- B), Where, A - Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress, N - Number of years prescribed for completion of the works for which tenders are invited 02 month, B - Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 02 month, Note :The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- the value of existing commitments and on-going works as well as the stipulated period of completion

Others

NIL

Others -- NIL

NIL

Others -- NIL

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹34,500

Important Dates

Last Activity

18 Mar 2026

Published

18 Mar 2026

Bid Opening

26 Mar 2026

Download Ends

23 Mar 2026

BOQ Preview

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing & fixing vertical blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures ...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm

•

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate

•

Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling, the partition shall be skinned ...

•

Providing and fixing Two sharing WORKSTATION of size 1200mm x 1200mm x 750mm (one W/S is 1200mm x 600mm x 750mm) consisting of back to back unit made out of 40 mm thick particle board covered with lam...

•

Supplying of Executive Main Table Size of 1600x800x750 With Side Return Table of Feathrlite or Equivalent make.inclusive of all materials, lead and lift ,loading and unloading, Transportation charges ...

•

Providing and Supplying of Executive High Back Mesh Chairs or Equivalent make, with Head Rest and Multi lock, gas lift of Helix series of Featherlite/ Godrej or equivalent make, including the cost of ...

•

Supplying and providing Visitors Chairs with fixed arms with sledge base of Featherlite, Godrej or equivalent make, including the cost of all the materials, labour and transportation, lead and lift et...

•

Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/m2)Sl.no.331 - A-22) KPWD SR 2023-24

•

Providing and fixing WorkStation Table of size 1200x600x750mm with MS Powder Coated Legs and provisioned For Cable manager And PLPB Table top Edge Covered PVC Beeding of Featherlite of Equivalent make...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 34126 GENERAL.docx

Tender Document • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

RAMESH C R

₹9.9 Laccepted-aoc