8793/GWL/E8 REPAIR TO FOOTPATH, DRAIN, FENCING AND BOUNDARY WALL ETC AT 4TH INF LINE IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

M&L Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50 and making good surface in soft/loose soil all as specified and as directed.

M&L for cement concrete type D-2 (1:4:8) as in foundation filling and mass concrete all as specified and as directed.

M & L, for cement concrete, type B-0 1:2:4 (using 12.50 mm graded stone aggregate) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for angle iron posts and struts in fencing including cutting tops to shape (swan neck) or as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work including 40x6mm flat iron for holding chain link fencing conforming to Fe-290 Gde E-165 all as specified and as directed.

Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L, preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Fixing only galvanised chain link fencing of 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.

Supply only galvanised chain link fencing of 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.

S&F, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc as in any type of soil complete all as specified and as directed.

M&L for RCC Type Bo 1:2:4 (12.5mm) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, complete all as specified and as directed.

M&L for RCC Type Bo 1:2:4 (12.5mm) for columns, pillars, piers, posts,coping and Struts complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for mild steel TMT bars 06 mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchion complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (20 mm stone aggregate) for coping complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even & rough for laying of wall tiles complete all as specified and as directed.

M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sand papering and M&L two coats of cement base paint on new plastered surfaces complete all as specified and as directed.

M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M& L for preparation of new steel surface of any description exc 10 cm width or girth not otherwise described and applying Two coats of black Enamelled paint over a coat of red oxide complete all as specified and as directed.

Dismantling stone slab, stone beams and type of any description or thickness laid bedded and pointed in any mortar in roof,floor etc. complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L 60 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specifeid and directed

M & L, hard core of for broken stone boulder of gage n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces.

M&L for screed bed or bedding layer of mortar 25 mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and directed

M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Babatia super works

MAHARAJ KUNWAR SAHAB CONSTRUCTION

M/s Ratan Lal Jain and Co.

Shree Jee Associates

Tara Mai Enterprises

M/s Anjali Construction

GURU KIRTH BUILDERS

BHAGIRATH CONSTRUCTION COMPANY

M/s J.B. Construction

M/s Subhash Construction Co.

Arkay Instrumentation