PROVISION OF GYRO REPAIR FACILITY (FIBER OPTIC GYRO) AT BAY-2 OF REFIT STORE COMPLEX AT NSRY (PBR) AND REPLACEMENT OF WATER FIXTURES WITH LOW FLOW FIXTURES IN SHIP SUPPORT COMPLEX BLDG NO P-185 AND P-91 UNDER GE HADDO SRI VIJAYA, SRI VIJAYA PURAM

Amount

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and their shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of sliding doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work or doors etc all as specified and as directed.

Supply only plain sheet glass 4mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed.

S&F extruded aluminum alloy handle fabricated type powdercoated 150mm long complete all as specified and directed.

S&F Aluminum powder coated barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard Dense soil complete all as specified and directed

Returning, filling in soil incl levelling watering and well ramming in layers n.exc .25cm in fdn trenches.

Removing excavated soil to a dist n.exc 50m and depositing where directed at a level n.exc.1.50m complete all as specified and directed.

M&L for PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

M&L precast cement concrete block masonry 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:4) all as specified.

M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed.

Supply only Liquid water proofing compound

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces.

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) 75mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.

S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.

M&L for aluminium wind tie of any size fixed with self tapping screw with integral EPDM washer in roof covering complete all as specified and directed

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for anodoised aluminium snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections aluminium section main tee 36.5x25x1.4mm, cross 23.5x26.4x1.4mm, angle 25x25x1.4mm including cutting, drilling jointing etc complete including 6mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-boards (Classic) 605mm x 605mm size at any ht upto 12 m with necessary scaffolding complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or floors etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or in floors etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius

M&L PVC (SWR) floor trap 100mm with grating including jointing with solvent cement complete all as specified.

S&F in vitreous china wash hand basin,white, flat back of size 450x 300 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, waste pipe and all necessary inlet, out let connections complete.

S&F in 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts etc all as specified

S&F Health faucet (ABS Body) Fancy type mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in 15mm dia CP Angle cock with flange fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs 15mm dia Two way bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S & F in for vitreous China bowl urinal flat back, of size 465x355x265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, buttiing urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with and including 32mm dia waste pipe in low density polyethylene (LDPE) of pressure rating 6 kgf/sqcm of 1.0 metre length, PVC connections 15mm size with PTMT nuts of length 450mm, concussive push button taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified.

S&F in Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange etc complete all as specified.

Supplying and laying of 20 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repairs for providing 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends suitable for CPVC pipes etc complete all as specified and as directed.

Cutting chases in PCC block or Brick or stone walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

M&L PCC 1:3:6 type C2 using 40mm aggregate for Concrete bed to 110 mm dia drain pipes of including packing under, and haunching against the sides of pipes after they are laid and tested; in complete

S&F UD PVC drainage pipes (SJ Type) S165/SN8/SDR34 110mm dia in any length with rubber ring joints laid in trenches all as specified and directed.

M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement.

M&L for providing precast cement concrete cover slabs for drain in RCC 1:2:4 type B1 (using 20mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M&L for deformed TMT steel bars 10mm dia and over cut to length, bent to shape required , including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

M&L for deformed TMT steel bars 5mm dia and over as in stirrups and cut to length, bent to shape required, including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

M&L for RCC (Nominal Mix) Type B1 1:2:4 (20 mm graded aggregate) in lintels, beams etc complete all as specified & directed.

M&L Chequered cement concrete tiles (glossy finish) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors, over and Including 20mm thick screed bed in CM 1:6 etc all as specified and as directed.

S&F in repairs 15 mm bore low flow pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed. Make : Jaquar cat part No VGT-81001 or equivalent in Zoloto / Leader.

S&F in repairs 15 mm bore Swan neck low flow pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed. Make: Jaquar cat part No HR-5357N or equivalent in Zoloto / Leader

S&F in repairs 15mm low flow bib taps flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe complete all as specified and as directed. Make: Jaquar cat part No ARI-39037 or equivalent in Zoloto / Leader.

S&F in repairs 15m low flow two way bib taps flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron complete all as specified and as directed. Make : Jaquar cat part No ARI-39041 or equivalent in Zoloto / Leader

S&F in repair dual flush syphonic PVC valveless low level action type flushing cistern 10ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed Make : Jaguar Cat Part No ALD-CHR-573 or equivalent in Parryware/Hindware

S&F in repairs chromium plated overhead shower rose of Make Jaquar OHS-CHR-053KN or equivalent in other makes with or without swivel joints fixed to 15mm bore of pipe complete all as specified and as directed.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :- Note :- The unit rate quoted shall deemed to include the cost of following :- (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS specification. (c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces.

All as per item Sl No 71 above, but ,for One light/fan point controlled by one modular switch 5 Amps one way complete all as specified and directed.

All as per item sl No 71 above, but, point wiring for 3 pin switch socket outlet , 5 Amps on independent board complete all as specified and directed.

All as per item Sl No 71 above, but, point wiring for 3 pin switch socket outlet , 5 Amps on same board complete all as specified and directed.

All as per Srl item No 71 above, but, point wiring with 2.5 sqmm for 5 pin switch socket outlet, 6 Amps on independent board complete all as specified and directed.

All as per item No.71 above, but, point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, universal all as directed.

S & F Switch modular type , single pole one way 16 amps all as directed.

S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

Supply & fix Modular AC Box With 20A DP MCB "C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98492 or equivalent in Havells / ABB / C&S

Supply and fixing Insulated Plug & Socket with single pole + neutral and earth encolsure with a three pin plug with socket complete with one MCB SPN of 20 Amps (`C’ series) having current rating 10 KA all as specified and directed. Make: Havells model No -DHDPBDP016 or equivalent in Indo Asian / L&T / Legrand / ABB

S & F stepped type modular fan regulator, 2 modular type complete all as specified and directed.

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz with all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed by Engr In charge. Make: Usha , Model No TECHNIX or equivalent to CG/ Havells/ Orient

S & F and testing LED recessed mounted 2' x 2' LED luminarie with with high transmitive diffuser of cap 36 watt, size 2 x 2 Ft with longer life and less maintenance including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make:Philips, model no-RC370B LED36S-6500 G6 L60W60 PSU OD V3 or equivalent to CG/ Havells/ Luker

Supplying, fixing and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED22S or equivalent to CG/ Havells/ Luker

Supplying, fixing and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 10 watts 2 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED12S or equivalent to CG/ Havells/ Luker

S & F Sub main wiring with PVC insulated FRLS cable 2 runs single core 4.0 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed/surface conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLS copper conductor single core 4.0 sq mm for earth continuity all as directed.

All as per item No 85 above, but,6.0 sqmm 2 core. Note for item No 85 to 86 : 3 length of cable and one length PVC Conduit shall be measured and paid for one length.

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 12 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete.

All as per item No 88 above, but, 8 way.

All as per item No 88 above, but, 4 way.

Supply and Fixing 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA alongwith copper separator terminals complete all as specified and directed .

S & F MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S & F MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S & F MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

S & F copper Earth continuity conductor or main earthing lead of size 32 mm x 6 mm, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc. as required all as directed ad specified.

M & L for Chemical earthing complete with copper earth plate electrode 90cm x 60cm x 5mm thick burried in ground vertically to a depth not less than 5 mtrs below ground level with top edge of plate at a depth not less than 4.25 mtrs below nominal ground level with a bottom layer MG SO4 of 10cm thick, earth plate surrounded with graphite powder, vegetable soil mixture, charcol and common salt in equal proportion around and 15cm above the plate and 10cm thick MG SO4 as top layer and the remaining portion filled with excavated earth and connected with copper strip 32mm x 6mm duly brazed up to 7.5 mtrs length and connected to earthing test point, GI pipe light grade 40mm bore for watering with funnel and wire mesh all as shown in Elect Plate No.3 of MES Sch Pt I and as specified and testing on completion including provn of earth pit with necessary earth work, PCC (1:2:4) type B1 Chamber, cast iron frame with hinged pit cover of size 12" x 12" having 7kg weight complete all as specified and directed. NOTE : (i) All the joint copper strips shall be of brasing only. (ii) Test result of Earthing to be submitted by Contractor for all earthing. (iii) Earth resistance value should be less than 1 ohm for each earthing.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Supply, laying, testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 3.5 x 35 sqmm (laid in terenches, ducts, pole ,wall etc.) incl taking down old unsv cable all as specified and directed.

Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 50 mm(OD) x 38 mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. Make : REX POLY EXTRUSION LTD / TIRUPATI PLASTOMATICS PVT LTD/ PRINCE / JAIN IRRIGATION SYSTEMS LTD/PRINCE

Supply, install, test & commissioning of Split type air conditioner, 2.0 TR capacity, BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasma filter for better air quality, copper wound, electric driven, single phase, 240 volts, 50 Hz, AC supply including transporting to site, fixing of indoor and outdoor units with necessary wall mounting brackets, necessary copper piping minimum (3+16) RM for connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistranded copper conductor, complete all as specified and as directed. MAKE : Blue star IC 524 DNU or equivalent in Hitachi / Daikin NOTE No. 1 : 1. Extra all connected pipes Upto 16 RM shall be included in quoted rate. 2. The drain out water pipe connection should be connected up to ground level. Note No 2 : The Airconditioners are to be procured from a local dealer with a local service set up as a back up for emergency rectifications.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA.

Sub main wiring with three runs (2P+1N) of 4.0 Sqmm 1100V grade with stranded copper conductor in and incl rigid PVC Casing and capping (ISI marked) incl all specials and provision of PVC insulated copper conductor single core 4.0 sq.mm for earth continuity complete all as specified and as directed.

S & F for motor starter switch of capacity 25 Amps working on 240 volts AC supply alongwith with 25 Amps mini MCB SP type 'C' 240 volts for air conditioner complete all as specified and directed.

M/s Ramesh Lal (BID ID -3349564)

Bismi Builders & Enterprises (BID ID -3350830)

CHANDER SEKER ENTERPRISE (BID ID -3351069)

M/s K Moorthi (BID ID -3349633)

SKV Engineering (BID ID -3350617)