Improvement Upgradation to the Electric System in the Ward No. 20 at Govt. SMGS Hospital Shalamar Jammu.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 x 16 Sq.mm + 2 x 6 Sq.mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6/16/32 amp.

Single pole & Neutral 32 Amp

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/m recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

2 x 4 sq. mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way Double door

6 way Double door

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning. (Above to 32 Amp)

TPN 63 Amp

Supplying & fixing of 20/22 watt LED 4 feet tube light fitting Aluminium housing with 2000 Lumens and min lumens efficiency 100 Lumens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm).

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm copper strip at 0.50 metre below ground as strip earth electrode including connection/terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm).

Supplying and fixing of Bus Bar Chamber for earthing including copper bus bar as required including connections etc. as required. (1 CFT)

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE Aluminium Power Cable of following sizes on surface/surface cable tray etc. as required including carriage upto site of work. (Make as per annexure enclosed)

95 Sq.mm 3.5 Core Armored

120 Sq.mm 3.5 Core Armored

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

Ceiling fan 1200 mm sweep alongwith fan rod upto 1'-6" long .

Exhaust fan 300 mm size (metalic)

Exhaust fan 380 mm size (Heavy Duty)

Wall fan 400 mm size

NAZI AHMED KUMAR

M/S JAMWAL ENTERPRISES

HIRA LAL

AMIT KUMAR CHOPRA GOVT CONTRACTOR

M/s Mahakaal Associates

SV ELECTRICALS

AKIB AHMAD

RAKESH KUMAR