SPECIAL REPAIR TO BLDG NO. T-121A, T-111, T-418,T-109, T-355, T-116 AND T-354 AT KARU AND SPL REPAIR TO 63 KVA DG SET AT TANGTSE AREA UNDER GE 860 EWS

Amount

S&F in repair aluminium anodised glazed Aluminum partition incl sliding/hinge type window & door complete with shutter size of style top rail and lock rail 83x45x1.60mm thick and bottom rail 114x44x1.60mm thick and partition frame size 63x38x1.60 mm including aluminium mongry fitting, hinges, tower bolt, handle, lock etc all necessary fittings and glazing with 5mm thick tinted glass/12mm thick pre laminated particle board complete including rubber lining at sides for air locking with complete all as speicified and as directed by Engr in Charge.

M&L for readymade soft wood wall panelling /ceiling in strips of 100 mm width 10mm thickness having lounge and groove fixing arrangements fixed to wooden frame work(Size of frame work 1.2X1.2 C/C included ) as per manufacturers instruction including polishing complete all as specified and as directed by Engr-in- Charge .Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement complete all as specified and as directed by E-in charge.

S&F in repair SDC Laminated flooring 8mm thick of any coloured, manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base, complete including removal of existing flooring complete all as speicified and as directed by Engr in Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in Charge.

M&L 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and as directed by E-in charge .

Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame work complete all as specified and as directed by E-in charge.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 Sq cm n.exc 25 Sq cm secured with nails or brads complete all as specified and as directed by E-in charge.

M&L second class hard wood timber scantling bull?nosed, splayed,chamfered or rounded on one edge or face, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm secured with nails or brads complete all as specified and as directed by E-in charge.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing dismantled tile and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C2 (Using 20mm graded crushed stone aggregatre) as in floor levelling and finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with 15 mm CM 1:4 sceed bed complete all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.16 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with 15 mm thick CM 1:4 screed bed complete all as specified and directed by Engr-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick bacing finished even and rough to receive tiles in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (20mm graded crushed stone aggregate) as in floor plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

M&L preparation of new Surfaces untreated surface apply one coat of red oxide,zink chrome and two coat of synthetic enamel (ordinary tint) paint any description, over 10cm in width or girth,not otherwise described complete all as specified and directed by Engr-in-Charge.

Complete removal of existing surfaces including washing rubbing down and scrapping for applying Two or more coats of 100% Premium acrylic emulsion paint on wall having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. including Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engr-in -Charge.

Dismantling wrougth iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engr-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as speicified and as directed by Engr in Charge.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

M&L for preparing old surfaces of plastered or unplastered surfaces including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required)

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

M&L for preparation/ complete removed of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F in repair One piece European WC viterus china with S/P trap & slow motion seat cover as per Cera part no. S1014124 or equivalent approved in CENC of Jaguar/Hindware etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe including 100mm PVC 'P' trap complete all as specified and directed by Engr-in-Charge.

S&F in repair of PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc with flush pipe of polyethylene of low density 32 mm dia of suitable length and making all connection complete all as specified and directed by Engr-in-Charge.

S&F in repair Viterous China WHB 550 x 400 mm pedastal type including cutting for and pinning in ends of brackets or erecting stand with and including of CP Pillar tap 15mm, CP Waste coupling 32mm, PVC waste pipe 750mm long and brackets complete all as speicified and as directed by Engr in Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engr-in-Charge.

S&F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in posplinition complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed by Engr-in-Charge.

S&F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in posplinition complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair 25 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. complete all as speicified and as directed by Engr in Charge.

S&F in repair 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 16 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilins or in floors etc. complete all as speicified and as directed by Engr in Charge.

S&F in repair 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 25 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall s, ceilins or in floors etc. complete all as speicified and as directed by Engr in Charge.

S&F in repair 15 mm bore Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed. complete all as speicified and as directed by Engr in Charge.

S&F in repair bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as speicified and as directed by Engr in Charge.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) and waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches with all fittings in floors/Walls complete all as speicified and as directed by Engr in Charge.

Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in Charge

Taking down of chowkats with shutter (without taking of shutter from frame) n exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as speicified and as directed by Engr in Charge.

S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as speicified and as directed by Engr in Charge.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

M&L for Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 is to be finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparing new surfaces of plastered or unplastered and applying two coats of cement base paint over chalk whiting complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required)

M&L for preparing new surfaces of plastered or unplastered and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required)

Demolition of Brickwork / concrete block or stone/ boulder masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete type C1 1:3:6 (using 20 mm graded crushed stone aggregate) set in CM 1:4 completed all as specified and directed by Engr-in-charge.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl surface PVC Boxes of suitable size fixes with wall surface, Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :-

One light / bell / buzzer / exhaust fan point controlled by one no, 1-way, 5 Amps switch.

One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

Description all as per Srl item No. 61.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F, in repalcement, of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Switch Socket combination, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Switch Socket combination, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F, in replacement of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 3000K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in Charge.

S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal anagement in multiple optics complete with IP 65/66 protection complete all as directed by Engr-in-Charge at site including necessary fixing arrangement like bracket, clamps and nuts and bolts complete all as specified and directed.

S&F in replacement Lamps Holder PVC/ polycabonate by with back plate angular type complete all as specified and directed.

S & F LED bulb 9W for fixing with lamp holder complete all as specified and directed.

S&F in replacement exhaust fans made of sturdy Engineering plastic AC single phase 230/ 240 V of size 250 mm sweep with louvre complete in cluding making hole in the wall and making good the disturbed surfaces complete all as specified and directed.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of DB, Single Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 2 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as directed.

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge.

Excavation in trenches not exceeding 1.5m and not exceeding 1.5m in depth for laying of electric cable and getting out in hard and dense soil, complete all as specified and as directed by the Engr-in-Charge.

Returning, filling in excavated soil, including leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engr-in-Charge.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engr-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying, streching & testing of cable in trenches complete all as specified and directed by Engr-in-Charge. Note :- Only punned thickness i.e 18cm shall be measured and paid.

M&L in repair earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

Repair and top overhauling of Diesel Engine driven generating set 06 cylinder of cap of 63 KVA, Engine No -4R1040T & Alternator No ES3A012J159642 installed at 114 Inf Bde Area complete with the following works and replacement and major parts under para (a) to (aa) as under item srl No. 87.00 :- (a) Disconnecting the electric connection of the alternator and decoupling from engine and disconnection unsv/serviceable parts for repair/replacement such as inlet/outlet manifold, turbocharger, FIP,air cleaner, fuel injectors, cylinder head, tappet cover, cylinder linner, piston assy, connecting rod assy, exhaust valve seat, insert valve seat, fuel pump, L.O. pump, etc. at site and cleaning all the serviceable parts with Keroscene oil for reuse all as specified and directed by Engr-in-charge. (b) Transportation of unserviceable parts such as cylinder head, oil pump , FIP, L.O. pump, injector nozzles, etc. obtain from the above DG sets on site to the authorized workshop for repair and retransportation of repaired parts from workshop to installation complete.

(c) Grinding, polishing & facing of cylinder heads and including replacement of seats and repair to cylinder head all as directed by Engr-in-Charge (d) Re-assembling the Engine and alternator complete and connecting the alternator and coupling with engine complete after repair/ replacement of serviceable/unsv spare parts incl testing and commissioning of DG set on full load upto desired satisfaction of Engineer-in-Charge complete. Note:- (i) The major spare parts required for overhauling of engine shall be measured and paid separately under Sch A Part I Item No. 3 (a) to (aa). (ii) Minor spare parts such as plain machined washer, set screw, joint, set bolt, O rings, washer, spring dowel, dowel pin, bolts, pins, nuts, banjo bolts, copper washer etc for proper functioning of DG sets deemed to be included in the item rate. (iii) Spare parts shall be of existing make/model or reputed manufacturer as approved by GE/Engr-in-charge

M&L for metalling, Grinding and polishing of crank shaft to required size all as directed.

Supply only following spare parts for 01 X 63 KVA DG sets for proper functioning of the DG set and replacement under Sch of work item No. 85.00

(a) Stop solenoid 12 Volts.

(b) Alternator Lucas 12 Volts for battery charging

(c) Cylinder liner assembly with O Ring.

(d) Piston assembly with piston Ring set

(e) Fuel pipe from pump to fuel filter

(f) Fuel pipe from fuel filter to fuel pump.

(g) Gear cam shaft.

(h) Bushing.

(j) Connecting Rod.

(k) Head valve insert.

(l) Head valve exhaust.

(m) Head valve guide stem.

(n) Small end CR bush

(o) Large end CR bush

(p) Upper head gasket

(q) Oil pan gasket.

(r) Cap Main Bearing.

(s) Valve seal and valve tappet

(t) Lub oil filter assy complete.

(u) Valve piston cooling.

(v) Fuel filter complete.

(w) Gear Idler.

(x) Spring compression.

(y) Air cleaner.

(z) Oil Feed pump Assembly

(aa) Fan hub Assembly complete

Repair, checking and Calibration of injector assembly including supply and replacement of the injector cups barrel plunger etc, required for smooth functiioning of injector assembly complete all as specified and as directed.

S&F in replacement of fan belt all as directed Make- Fenner/KCL

Disconnecting removing the U/s burnt out wiring loom complete from the generator engine, alternator, control panel board etc. and Supply, fixing and connecting the wiring loom and checking the complete electrical circuit for its smooth functioning all as directed.

Repair and callibration of FIP, stripping out, cleaning and segregating serviceable and unserviceable parts, incl replacement of following worn out parts and assembling the same with engine all as directed by GE/Engr-in-Charge. (a) Fuel pump gear -02 No. (b) FIP kit -02 No. (c) Assembly screen-02 No (d) Ring sealing -02 No (e) Oil seal -02 No

Dismantling the radiator from the engine, transporting the radiator from site to workshop. Dismantling the radiator in and including descaling ,gas welding the leaking tube whichever required for proper functioning of radiator. After repair retransportation from workshop to site and fixing the same with engine in existing position complete all as specified and as directed.

Disconnecting the muffler after disconnecting the same taking down the muffler from the silencer, taking out the carbon from the muffler through blow lamp, after cleaning the muffler , painting of muffler with two coats of alumium paint over coat of red oxide and refixing the same complete all as directed.

S&F in repair automatic voltage regulator 24 Volt complete. Make : Kirloskar/Cummins or equivalent

Supply and fix in repair Water outlet and inlet hose pipe from radiator to Engine and back from Engine to radiator . Make Crompton Greaves / Kirloskar or equivalent

M&L for Repair to alternator , including replacement of unserviceable burnt winding of armature and stator using existing size copper winding and insulator including heating and varnishing including replacement of US bearings, rectifier, diode plate and carbon brushes etc complete all as specified and directed by Engr-in-charge.

M&L for replacdement of Water pump assembly completet all as specified and directed.

Supply and fix in repair Anti vibration rubber pad complete all as specified and directed.

Supply and fixing for replacement of copper battery lead 3 Mtrs long PVC insulated multi stranded with brass clamp incl necessary bolts & nuts and fixing lugs etc complete all as specified and as directed by Engr-in-Charge.

Draining all the U/S DAFC 50% from the DG Sets Supply and filling theDAFC 50% all as specified and as directed by Engr-in-charge. Make Servo, HP or any approved Make.

M&L for Repair/servicing self starter by supply and fixing including taking out the following parts ,(a). Field Coil (b). Armature Winding (c ). Bush (d). Solenoid switch (Gear) for 63 KVA DG Sets Make : Kirloskar

M&L Calibration of electronic panel of 63 KVA Kirloskar DG set with Laptop and fixing all fault including replacement of US relays/wiring as per requirement by Kirloskar engineer complete all as specified and directed.

Supply & fixing in replacement of Oil/water sensor suitable for DG set of capacity 63 KVA of DG Sets complete all as specified and directed by Engr-in-Charge.

S&F in replacement Control Card (PCB) of existing make and model suitable for DG set of capacity 63 KVA Make : Kirloskar

Draining all the U/S E Oil from the DG Sets Supply and filling the 20 W 40 E oil all as specified and as directed by Engr-in-charge.Make Servo, HP or any approved Make.

M&L for cleaning of fuel tank of DG sets of capacity upto 100 KVA by draining out the fuel and storing in a container for re-filling complete all as specified and directed by Engr-in-charge.

SHANTI ENTERPRISES (BID ID -3413264)

M/s Aman Enterprises (BID ID -3413357)

S S BUILDERS (BID ID -3412972)

Ms Madan Gopal (BID ID -3413030)

JP AND CO. (BID ID -3413410)

M.B TUBE AND ALLIED IND. Contr (BID ID -3413103)

D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3413064)