Provn of 02 x Toilets for girls and boys, 02 x Toilets for teachers and Adm Staff and 01 x Sick Bay at APS Kapurthala under GE Kapurthala.

Amount

Surface dressing not exceeding 15cm deep including cleaning away all grass vegetation, sapling, shrubs, brushwood, undergrowth, roots and removing rubbish upto a distance of 50 Metres outside the periphery of the area complete all as specified and as directed by Engineer-in- Charge.

Excavating in trenches not exc 1.5 m wide and not exc 1.5 m in depth, not exc 10 sqm on plan, for foundation/foundation of poles/stays/laying of cable and getting out soft/loose soil complete all as specified and as directed by Engineer-in- Charge. Breakdown of Qty Bldg Works -120 Cum Electrical Works - 57.4 Cum

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer-in- Charge. Breakdown of Qty Bldg Works -79 Cum Electrical Works - 24.75 Cum

Removing excavated material not exc. 50m away and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in- Charge. Breakdown of Qty Bldg Works - 41 Cum Electrical Works - 32.65 Cum

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone agg) as in foundation, filling, sub base of floor complete all as specified and as directed by Engineer-in- Charge.

M&L for 40mm thick PCC 1:2:4 type B-0 as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed by Engineer-in- Charge.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM 1:6 complete all as specified and as directed by Engineer-in- Charge.

M&L for brick work with sub class 'B' bricks using old size bricks (half brick thick) straight or curved on plan exc 6m mean radious built in CM 1:4 complete all as specified and as directed by Engineer-in- Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) as in foundation including rafts, plinth beams, footings for column etc complete all as specified and as directed by Engineer-in- Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) as in columns, piers, posts, struts etc complete all as specified and as directed by Engineer-in- Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) as in lintles, roof beams, etc complete all as specified and as directed by Engineer-in- Charge.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas complete all as specified and directed by Engineer-in-charge.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in slabs complete all as specified and as directed by Engineer-in- Charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or horizontal for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in- Charge.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete complete all as specified and as directed by Engineer-in- Charge.

M & L for formwork to soffits of suspended slabs flat or curved surface of concrete finished rough surfaces of concrete not exceeding 200mm thick complete all as specified and as directed by Engineer-in- Charge.

M&L for use and waste of formwork to sides and soffits of beams & lintels over 1.50m clear span complete all as specified and as directed by Engineer-in- Charge.

M&L for 100mm thick PCC 1:4:8 (40mm graded stone aggregate) type B-2 as in subbase complete all as specified and as directed by Engineer-in- Charge.

M&L for 40mm thick PCC 1:2:4 (20mm graded stone aggregate) type B-1 as in subbase for receiving floor tiles complete all as specified and as directed by Engineer-in- Charge.

M&L for 75mm thick PCC 1:3:6 (20mm graded stone aggregate) type C-2 as in plinth protection finishing the surface even and fair complete all as specified and as directed by Engineer-in- Charge.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and fair complete all as specified and as directed by Engineer-in- Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed by Engineer-in- Charge.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement in ceiling complete all as specified and as directed by Engineer-in- Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L preparation of plastered and unplastered surfaces of wall and applying two coats of oil bound distemper over 3mm wall care putty to achieve smooth finish complete all as spedifed and directed by Engr-in-Charge. Note : OBD to be done by Roller.

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge

All as per Serial Item No 26 above but 6 mm dia and over upto 10 mm dia as in stirrups, spacers and binders complete all as specified by Engineer-in-Charge.

S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and as directed by Engr-in-Charge.

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick (5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterproof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and as directed by Engr-in-Charge.

M & L for Veneered decorative plywood, grade 1, 12mm thick , 7 nos ply (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified and as directed by Engr-in-Charge. Note : Timber frame work is included in this item.

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing anodised aluminium windows and ventilators powder coated shutters aluminium section weighing 0.55 kg/m with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws handles 2 Nos in each shutter etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed by Engr-in-charge.

Supply & fix Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed by Engr-in-Charge.

S&F in Cast iron body door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed by Engr-in-Charge.

S&F kitchen sink of stainless steel 1 mm thick with plugs, washers , incl bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge.

Supply and fixing solid PVC door frame factory made of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specifications all as per SSR Part-I as specified and directed by Engineer-In-Charge

Supply and fixing factory made solid panel PVC moulded door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing including fittings all as specified and directed by Engineer-in-Charge

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and as directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and as directed by Engr-in-Charge.

Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and as directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares not exc 0.5 sqm each pane and glazing with oil putty complete all as specified and as directed by Engr-in-Charge.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and as directed by Engr-in-Charge.

S&F fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm complete all as specified and as directed by Engr-in-Charge.

S&F for 15 mm bore CP bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and as directed by Engr-in-Charge.

S&F in vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity and white in colour and PVC flush pipe 32mm dia complete all as specified and as directed by Engr-in-Charge.

Supply and fix of vitreous china bowl urinals flat back, half stall complete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, urinal spreader, jointing around urinal back in cement paster including flush pipe, grating and union for discharge pipe complete all as specified and as directed by Engr-in-Charge.

S&F for fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm complete all as specified and as directed by Engr-in-Charge.

S&F shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and as directed by Engr-in-Charge.

S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 450x350x7/ 350x250x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the shade of tile including 10 mm thick cement screed bed (1:4) complete all as specified and as directed by Engr-in-Charge.

Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engineer-in-Charge

M&L for 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and fixed in floors complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge.

S&F 75 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.

S&F PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and as directed by Engr-in-Charge.

Supply and fixing rotational moulded polythelene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-1 of 500 ltrs capacity including fittings complete all as specified and as directed by Engineer-in-Charge.

S&F for acrylic shelf 450mmx100mm fixed with chromium plated brass screws and plastic gutties complete all as specified and directed by Eng-In-Charge.

S&F soap dish chromium plated heavy duty complete all as specified and as directed by Engineer-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed complete all as specified and as directed by Engineer-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 15mm fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-455gms) complete all as specified and as directed by Engineer-in-Charge.

M&L for pre cast cement concrete 1:2:4 as in manhole covers type B-1 (20 mm graded stone aggregate) as in manhole cover set in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for RCC NP-2 drain pipes 200mm dia (internal diameter of pipe) Grade "A" laid in trenches and jointed with cement mortar 1:1 complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm dia NP-2 pipe complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick on brick or concrete surface in cement mortar 1:3 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note - Water proofing compund shall be measured and paid seprately.

Material and labour for applying high build elastomeric waterproofing coated based on pure hydrophobic polyurethane cold applied or spray, brush applied, membrane with an elongation of 280 % and tensile strength of 2.7N/mm2 as per ASTMD 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure, minimum 88% solid content. The system includes final base preparation, epoxy primer application with 100% water dilution and pure polyurethane application in two coats with minimum consumption of 1.2 kg/sqm complete all as specified and as directed by Engr-in-Charge. Note: Application should be done with authorised applicator of the manufacturer.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a) One light point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

(b) One fan point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring with 2.50 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 2.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 6 Amp (ISI Marked) complete all as specified and as directed by Engr-in-Charge. Make - Havells/ Schnider/ Legrand or equivalent as mentioned in list of makes Appx B-1

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) Make - Havells/ Schnider/ Legrand or equivalent as mentioned in list of makes Appx B-1

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) Make - Havells/ Schnider/ Legrand or equivalent as mentioned in list of makes Appx B-1

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked) complete all as specified and as directed by Engr-in-Charge. Make - Havells/ Schnider/ Legrand or equivalent as mentioned in list of makes Appx B-1

Supply, installation, testing and commissioning LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. Make: Crompton/ Bajaj/ Philips or equivalent as mentioned in list of makes Appx B-1

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.

Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed by Engr-in-Charge. Make : Wipro/Havells/Bajaj or equivalent as mentioned in list of makes Appx B-1

Supply and Fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge :- (i) SP 6 To 32 AMP

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge :- (i) SPN 40 to 63 AMP

Supply and fixing exhaust fan, steel body AC single Phase 230V of size 300 mm sweep with blades and frame and louvers cutting of the holes in existing wall and making good the surfaces complete all as specified and as directed by Engr-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep Min air delivery 250 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed by Engr-in-Charge. Note :- For payment purpose total 18cm will be considered.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed by Engr-in-Charge.

Supply and fixing 25 mm bore steel water tubing, medium grade, galavanised with all fittings and laid in trenches complete all as specified and directed by Engr-in-Charge.

All as per description of Srl item No 92 here-in-before but 40 mm bore pipes complete all as specified and directed by Engr-in-Charge.

All as per description of Srl item No 92 here-in-before but 15 mm bore pipes complete all as specified and directed by Engr-in-Charge.

Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 25 mm bore iron pipe and fixed in position complete all as specified and directed by Engr-in-Charge.

SUNRISE ENGINEERS AND CONTRACTOR (BID ID -3168882)