Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.1 L+₹2.6 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹33.3 L+₹9.8 L (41.4%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹36.1 L+₹12.5 L (53.2%)Rejected-Finance NA | NA | NA | 121004 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹44.4 L+₹20.8 L (88.2%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
5 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN-151201
AS PER BOQ/PRICE SCHEDULE
2022_MES_550403_1
GE/BHI/T-08/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
AS PER NIT/TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GE (AF) BHISIANA
₹70,000
Yes
23 Nov 2022
7 Sept 2022
7 Oct 2022
7 Sept 2022
5 Oct 2022
21 Sept 2022
13 Sept 2022 - 17 Sept 2022
60 days
Amount
Taking down Chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed by Engineer in Charge.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed of size 125 X 60mm.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directed of size 105 X 60mm.
M&L for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhats etc complete all as specified and as directed by Engineer in Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed by Engineer in Charge.
S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and as directed by Engineer in Charge.
M&L for 100mm size stainless steel butt hinges complete all as specified and as directed by Engineer in Charge.
100mm size stainless steel handles complete all as specified and as directed by Engineer in Charge.
150mm long stainless steel tower bolt complete all as specified and as directed by Engineer in Charge.
S&F factory made 2nd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer in Charge.
S&F factory made glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete all as specified and as directed by Engineer in Charge.
S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified and as directed by Engineer in Charge.
S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer in Charge.
S&F 150mm Aluminium handles, fabricated type complete all as specified and as directed by Engineer in Charge.
S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer in Charge.
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed by Engineer in Charge.
S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F in repair floor door stopper of size 140mm of aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors.
S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.
M&L for Shutters of any description exc 1 sqm, but not exc 2 sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required. all as specified as directed.
S&F box type steel windows glazed & gauged factory made MS square/rectangular ERW Hollow pipe of gauge 18 with side hung shutters including box type hinges with steel handle and steel peg stay, and including stainless steel wire cloth 1.14mm dia and 4mm thick glass fixing with putty and glazed pins and including 8mm or 10mm dia square bar at equal spacing n.exc 150mm c/c grills and guard bar including preparation & applying two coats of Synthetic enamel paint over a coat of red oxide complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with existing surface and including taking down old existing window with frame complete all as specified and as directed.
S&F box type steel ventilator glazed & gauged factory made with side hung shutters including box type hinges with steel handle and steel peg stay,necessary grills and guard bars and 4mm thick froasted glass including preparation & applying two coats of Synthetic enamel paint over a coat of red oxide including taking down existing window and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete all as specified and as directed.
M&L applying Two coats of Synthetic enamel paint over a coat of factory made primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed by Engineer in Charge.
Supply and fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and as directed by Engineer in Charge.
S&F as in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and as directed by Engineer in Charge.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and as directed by Engineer in Charge.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge.
S&F figured glass 4mm thick , pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge.
S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod/curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative nobs, complete all as speccified and directed as per approved sample by Engr-in-Charge.
Dismantling boarding of any description including hardware fittings ,fixed in any position with nails etc complete.
M&L for Factory made PVC cupboard sides, top & bottom frame (Each side measured Seperately ) , 30mm thick (hollow) with a wall thickness of 5mm made out of extruded 5mm thick plain/printed / prelam PVC sheet reinforced with 19mm x 19mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with two numbers 150mm long brackets of 10mm x 10mm square tubes and cupboard frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of srew to be provided horizontal member etc complete as per manufacter's instructions and all as specified and directed .Note :- Making good the disturbed side plastering and Painting with existing colour (Distemper/OBD ) included in the item
M&L for Factory made PVC cupboard shutter of 30 mm thick consisting of frame made out of MS tubes of 19 gauge thickness and size 19mm x 19mm covered with panneling of 5mm plain plus 5mm thick prelaminated PVC sheet fitted in the MS frame and sealed to the front stiles and rails which should having 20mm x15mm wide PVC biding and attached to back stiles and rails (which should have a 5mm 45 degree bend portion as beding) and decorative PVC beding is used on the front side of pannel externally impart perfect finish to the shutter and joint together with solvent cement adhesive complete all as specified and directed.
M&L for Factory made PVC drawer of required size (Each side measured Seperately ) constructed by joining two nos 5mm thick plain PVC sheet at the sides and bottom joint together with solvent cement adhesive complete all as specified and directed.
M&L for Factory made PVC centre partition shelfs of 25mm thickness consisting of MS Frame made out of MS tubeof 19 guage thickness and size of 15x15mm inserted all around the hollow profile section and insert 15mmx15mm MS tube in the centre of this section and liped with 10mm (5mm x2 ) thick plain PVC sheet at the top and bottom and 20mm wide and 15mm thick on sides using solvent cement adhesive complete all as specified and directed .
S&F 5 mm thick termite proof, water proof and fire retardant laminated PVC sheet jointed together at front side of Cupboard drawer frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.
S&F 5mm thick termite proof, water proof and fire retartant plain PVC sheet jointed together & fixed on back side of Cupboard frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.
S&F 30 to 50mm wide and 5 mm thick laminated PVC leeping in front of the cupboard to be edge bonded using on the edges etc complete all as specified and directed.
Continous piano hinges stainless steel, bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge.
Stainless steel handle, 125 mm complete all as specified and directed by Engr-in-charge.
Magnetic catcher for cupboards complete as all specified and directed by Engineer in Charge complete all as specified and directed .
40 mm wide Mild Steel telescopic channel fixed to drawer with screws complete all as specified and directed .
S&F Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples complete all as specified and directed .
Dismantling of mild steel work of any description not otherwise provided for complete all as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stands and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and as directed by Engineer in Charge.
S&F 0.63mm plain galvanised mild steel sheeting in ridges , hips, valley gutters , drip and straight flashings with frade of zink coating 275 incl dismantling of old plain or corrugated steel sheet complete all as specified and directed.
Taking down top hood cover from existing rolling shutters greasing, over oiling of all the components for easy operation realignment of guide channel bearing and tension spring, making good locking arrangement including cleaning etc Area Up to 15 Sqm of each shutter complete all as directed.
Taking down rolling shutter of any description (With all components) and in any size and removing from site area upto 15.00 Sqm each complete all as specified and as directed by Engineer in Charge.
S&F Steel rolling shutters of 1mm laths thickness, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed by Engineer in Charge.
M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified and as directed by Engineer in Charge.
S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified & directed.
Taking down Aluminium Chowkhats or frames with shutter not exc 1.0 Sqm each (without taking off shutters from the frames including all accessories) complete all as specified and as directed by Engineer in Charge.
Taking down Aluminium chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.0 sqm but not exc 4 Sqm each complete all as specified and as directed.
S&F Powder coated Anodised aluminium frame for doors, windows, ventilators, partations with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, mortice locks anodised aluminum snap beading screws etc. complete all as specified
S&F Powder coated Anodised aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F Powder coated aluminium decorative grill of size of mesh 50mmX50mm fixed with doors, window for safety of glass etc. complete all as specified and as directed.
S & F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty/ any type of beading in square/rectangular exceeding 1.00 Sqm in each pane complete all as specified and as directed by Engineer in Charge.
S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed by Engineer in Charge.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer in Charge.
S&F in repairs Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.
S&F Brass Mortice lock, four levers vertical type, size 75/100 mm complete all as specified and as directed by Engineer in Charge.
S&F in repair Brass Mortice lock, four levers vertical type, size 75/100 mm complete all as specified and as directed by Engineer in Charge.
Dismantling wall & ceiling board any type, any thickness including cover fillets complete all as specified and as directed by Engineer in Charge.
M&L for Non asbestos fibre cement boards 600x600x4mm thick fixed in ceiling Aluminium frame work with screws complete all as specified and as directed by Engineer in Charge.
S&F Anodised aluminium snap grid frame work of grid 605x605mm for false ceiling complete all as specified and as directed by Engineer in Charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .