Petty repair to certain building for day to day maint at Old Mil Stn Kapurthala under GE Kapurthala.

Amount

Taking down and refixing of shutter of any description area exceeding 1 Sqm but n exc 2 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter, complete all as specified and directed by Engr-in-Charge.

Resecuring or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each, complete all as specified and directed by Engr-in-Charge.

S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.18mm and fixed with tinned tacks of galvanised wire stapple etc wooden/fillets, complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick acrylic sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F in repairs MS tower bolt 150mm stove enamelled black with bright bolt and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Aluminium tower bolt 200mm with bright bolt and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs MS sliding door bolts of size 250mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified and directed by Engr-in-Charge.

S&F in repairs 125mm Aluminium handles, cast type, anodised, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 150 mm Aluminium handles, cast type, anodised, complete all as specified and directed by Engr-in-Charge.

M&L for mild steel pipe 25 mm dia curtain rod with Powder coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs 6 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter, shelves etc complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing incl connection, 15mm bore including cleaning of serviceable pipe for re-fixing complete all as specified and directed by Engr-in-Charge.

All as per ser item No 17 here-in-before but 20mm bore, complete all as specified and directed by Engr-in-Charge.

S&F mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors incl excavation complete all as specified and directed by Engr-in-Charge.

All as per ser item No 19 here-in-before but except pipe complete all as specified and directed by Engr-in-Charge.

S&F mild steel tubes, 20 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified and directed by Engr-in-Charge.

All as per ser item No 21 here-in-before but except pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron socket for 15 mm bore pipe including taking down and refixing pipes of any length as approved complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron socket for 20 mm bore pipe including taking down and refixing pipes of any length as approved complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron nipple 15 mm bore, 50 mm long including taking down and refixing pipes of any length as approved complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron nipple 15 mm bore, 100 mm long including taking down and refixing pipes of any length as approved complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron nipple 20 mm bore, 50 mm long including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron nipple 20 mm bore, 100 mm long including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron tanki nipple 20 mm bore, 100mm long including taking down and refixing pipes of any length complete all as specified and directed by Eng-In-Charge

S&F in repairs galvanized iron tanki nipple 15mm bore, 100 mm long including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron union 15 mm bore including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron union 20 mm bore including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron elbow 15 mm bore including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron elbow 20 mm bore including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron Tee 15 mm bore including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanized iron Tee 20 mm bore including taking down and refixing pipes of any length complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engr-in-Charge.

S&F in repairs 25mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engr-in-Charge.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified and directed by Engr-in-Charge.

Petty repairs to low level flushing cistern adjustement of syphon, repairs of washer, adjustement of handle, float valve as requried for making the cistern functional complete all as specified and directed by Engr-in-Charge.

S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ under floor including necessary excavation complete all as specified and directed by Eng-In-Charge

S&F in repairs PVC (SWR) bend/shoe of any radius for 110 mm bore pipes, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Brass chromium plated bottle traps of 32 mm dia for wash basins with inlet and outlet screwd fro pipe or connectins including necessary packing, union and cap and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type 15mm bore bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair for CP bib cock long body 15 mm fancy type complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type pillar tap, cast copper alloy, with capstan heads, 15 mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore CP brass mixer Hot & Cold for WHB/Sink complete all as specified and directed by Engr-in-Charge.

S&F in repairs flush pipe of polythene of low or high density PVC 32mm dia for low level cistern incl all joints complete all as specified and directed by Engr-in-Charge.

S&F syphonic action rod with float valve (Complete kit) for low level cistern fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass spindle, any length, for bib tap, stop cock 15 mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan ORISSA pattern size 580 x 440 mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China wash down Water closet pan (pedestal pattern) "with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash hand basin, pedestal pattern white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket, including fixing of all fittings (excluding of pillar cock, waste coupling and pvc waste pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP waste coupling (half or full threaded), (minimum weight 32mm, 45 gms) complete all as specified and directed by Engr-in-Charge.

All as per ser item No 56 but 40mm bore for steel sink complete all as specified and directed by Engr-in-Charge.

Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified and directed by Engr-in-Charge.

S&F in repairs towel rail 600 mm long PTMT and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge.

S&F in repairs MS angle iron bracket for WHB and kitchen sinks including fixing in wall making good to existing surface (size of angle 35 x35 x5 mm thick) complete all as specified and directed by Engr-in-Charge.

Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable in all means complete all as specified and directed by Engr-in-Charge.

S&F PVC cover of any pattern water tank cap 500/1000 ltrs complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32 mm bore, for WHB complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 40 mm bore, for sink complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 600mm long with brass nuts suitable for 15 mm bore pipe complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, chajjas, roof projection etc complete all as specified and directed by Engr-in-Charge.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparing surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over chalk whiting on plastered surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishing the surface even and smooth withot using extra cement complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP Jet for EWC including flexible pipe complete all as specified and directed by Engr-in-Charge.

M&L running welding in repair, any thickness of metal to be welded n exc 6mm complete all as specified and directed by Engr-in-Charge.

M&L running welding in repair, any thickness of metal to be welded n exc 2.5cm in length complete all as specified and directed by Engr-in-Charge.

M&L running welding in repair, any thickness of metal to be welded exc 2.5cm but n exc 5cm complete all as specified and directed by Engr-in-Charge.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground floor) complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tile n exe 0.36 sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M& L for vitrified ceramic tiles dark shade 10 mm thick (square/rectangular) area of each tile exceeding 0.42 but n exe 1.00 sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 450X350X7 mm (square/ rectangular) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM(1:4) complete all as specified and directed by Engr-in-Charge.

S&F in repairs kitchen sinks of stainless steel 1 mm thick with plugs, washers , incl bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union to pipe , over all size 495mmx420mm bowl size 420mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel kitchen plate rack, made out 1mm thick stainless steel, size 900x600x200mm (Minimum weight 10 Kg) with shelves and plate position as approved complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC cabinet size 450mmx325mmx120mm with looking mirror and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

S&F in repairs hand shower/health fauset (ABS Chrome Plated) with 8mm dia, 1 metre long flaxible tube & wall hook complete all as specified and directed by Engr-in-Charge.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs acrylic shelf 450mmx100mm fixed with chromium plated brass screws and plastic gutties complete all as specified and directed by Engr-in-Charge.

S&F in repairs of angle cock/stop cock spindle 15mm dia and length of spindle 50 mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repairs of angle cock/stop cock spindle 15mm dia and length of spindle 75 mm dia complete all as specified and directed by Engr-in-Charge.

Petty repairs to aluminium window and ventilator shutters, by making minor adjustment to hinges etc easing shutter including taking down of shutter if required and refixing in same position complete all as specified and directed by Engr-in-Charge.

Petty repairs to aluminium door shutters by making minor adjustment floor spring etc easing shutter including taking down of shutter and refixing in same position after providing new rubber beading around the glass, screws etc complete all as specified and directed by Engr-in-Charge.

Taking down Aluminium door shutter and repairs of pivot set for movement of swing door and refixing door shutter same opening ccomplete all as specified and directed by Engr-in-Charge.

S&F in repair repairs Cast iron body door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-Charge.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass chromium plated shower rose with or without swivel joints, 125mm size with arm including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S&F double legged floor door stopper aluminium alloy body and tongue, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed by Engr-in-Charge.

S&F CP Glass corner shelf including CP railing, radius 300mm fixed in repairs complete all as specified and directed by Engr-in-Charge.

Petty repairs to cup board (Kitchen) including easening of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing handle etc with drawers adjusting of ball catches etc, (One unit shall comprises one cup board irrespective in numbers of shutters and drawers) complete all as specified and directed by Engr-in-Charge.

All as per ser item No 102 above but cup board (Bedroom) including drawers complete all as specified and directed by Engr-in-Charge.

M&L for block board 18/19 mm thick grade 2 quality, exterior grade, commercial veneer on one face in cup board or drawers complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

Aatrey Builders (BID ID -3177948)

BR Enterprises (BID ID -3177394)

DUGGAL CONSTRUCTION CO (BID ID -3177666)