Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 CrAccepted-AOC LINK FIRST NEW AIRPORT ROAD NEAR TATA ENGINEERING GARAGE PO HUMAMA SRINAGAR 190014 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190014 | ₹11.3 Cr | L1 | Accepted-AOC Accepted being lowest one |
| 2 | L2₹12.7 CrRejected-AOC NO 15 B 2ND FLOOR 4TH CROSS T ASHWATHNARAYANA ROAD THIMMAIAH NAGARA YELAHANKA BANGALORE 560 064 | BANGALORE | BANGALORE | KARNATAKA | 560064 | ₹12.7 Cr | L2 | Rejected-AOC Rejected being other than lowest one |
| 3 | L3₹13.1 CrRejected-AOC PROP ZISHAN ALI ADARSH NAGAR NEW BUS STAND RAMGARH CANTT RAMGARH | ₹13.1 Cr | L3 | Rejected-AOC Rejected being other than lowest one |
Tender Value
₹11.7 Cr
EMD Value
₹9.1 L
Closing Date
8 Nov 2022, 6:00 pmClosed
Chief Engineer, 31 Zone
HQ Chief Engineer, 31 Zone, c/o 56 APO, PIN-914631
CONSTRUCTION OF 01 X IGLOO AND ALLIED INFRASTRUCTURE AT CHAKKIGAM
2022_MES_548552_1
Contruction of Igloo and Allied infra at Chakkigam
Open Tender
Civil Works
900 days
Chakkigam
Please refer tender documents
12 documents required · 12 mandatory
₹3,000
Yes
₹9.1 L
Yes
Srinagar
5 Jan 2023
31 Aug 2022
10 Nov 2022
31 Aug 2022
8 Nov 2022
22 Oct 2022
31 Aug 2022 - 30 Sept 2022
15 Sept 2022
Amount
Note: (i) Please refer Schedule 'A' Notes given in tender documents. (ii) This schedule 'A' Part-X is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.
LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No. 29(RR)
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 30(R)
Lump sum price worked out by the contractor for ROAD, PATH, HARDSTANDING AND CULVERT WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 33
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 34(R)
Lump sum price worked out by the contractor for PROTECTIVE / RETAINING WALL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 36(R)
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 37(R)
Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-VII brought forward from serial page No. 38
Lump sum price worked out by the contractor for LIGHTING PROTECTION WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 39
'Lump sum price worked out by the contractor for SITE CLEARANCE & EARTHWORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 41(R)
Miscellaneous Items of Works (SCHEDULE 'A' PART-X) INTERNAL ELECTRIFICATION WORKS
Material and labour for sub main wiring with two runs of single core FR PVC insulated multi-stranded copper conductor 2.50 Sqmm 1100V and one run of 2.50 Sqmm for earth continuous earth wire including suitable rigid stove enamelled steel conduit ISI marked concealed in walls / floors including necessary cutting chases complete all as specified and directed. Note : Two runs of PVC FR cable & one run of earth wire including steel conduit shall be considered as one unit.
Supply and fixing flame proof distribution board CMRI-LM-8, SPN 6 way, 230 volt, 50 Hz, double door with and including 01 No MCB SPN 20 Amp, 10kA, 230 volt, 'C' Series as incoming and 06 Nos MCB SP 6 Amp, 10kA, 230 volt, 'C' Series as outgoing complete all as specified and directed.
Supply and fixing LED light fitting 1 x 16 watt flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium hosing with heat resistant toughened glass with LED tube light fixtures drivers, holders, connectior etc complete with all accessories prewired and including connecting up with fhree core flexible copper conductor cable of suitable size complete all as specified and directed.
EXTERNAL WATER SUPPLY WORKS
Material and labour for cutting of existing steel tubing 80mm bore for alterations or additions for making branch connection and inserting and including Tee of size 80 x 80 x 50mm size, union 50mm etc including threading and fitting etc complete all as specified and directed.
EXTERNAL ELECTRIC SUPPLY WORKS
Supply, installation, commissioning and testing of LT distribution cubical type factory made dust and vermin proof panel board, fabricated to 2mm thick CRCA sheet angle and tee section 50 x 50 x 6mm frame, double door, front/rear opening and locking arrangeemnt, floor mounted outdoor type bus bar fixed on the post insulator including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer and pre wired with suitable size PVC insulator sheathed copper conductor cable comprising the following: -
MCCB 4 pole, 415volt, 100 Amp 25 KA (incoming) -01 No
MCCB 4 pole, 415volt, 63 Amps 16 KA (outgoing) -02 No
Indicator lamp RYB - 01 Set
Totally enclosed busbar having copper 4 strip of size 40mmx5mm thick and neutral respectively supported in porcelain insulated with colour red, yellow, blue and black.
Necessary foundation to fix the panel board and connecting, testing and commissioning complete all as specified and directed.
Complete wiring of panel board with suitable copper strip from incoming MCCB to bus bar and busbar to outgoing MCCB with RYB colour coated. Note: The rate quoted is inclusive of necessary CTs, control wiring and instrument fuse holder.
Material and labour for multistranded copper conductor heavy duty cable PVC insulated conductor, served with inner sheathing of PVC tape and overall PVC sheathed of size 2.50 sqmm 3 core for street light connection complete all as specified and directed.
Supplying and laying rigid (ERW) steel conduit, 25mm dia inclusive of boxes (junction/terminal), all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for street light fittings complete all as specified and directed. Note : Conduit will be fix with suitable MS flat iron clamp including bolts and nuts etc fixed on pole as directed.
Supply and errection of steel tubular swaged poles complete with cast iron base plate,finial taper plug,bolts,nuts and screws as specified type 410 SP-31 (9 metres long) including two coat of black bituminous paint internally throughout and externally upto embeded portion and applying two coats of synthetic enamel paint over a coat of red oxide primer with black and white strip of 30 CM each upto 1.5 mtr height and two coats of aluminium paint over a coat of red oxide primer externally on remaining exposed surface after preparation of surface and errection in position,Complete all as specified and directed. Note :- Excavation and earth work, PCC for foundation and coping etc. to be measured and paid separately.
Supply and fixing street light engineering plastic one piece moulding control box with locking arrangement made out of HDPE and flat iron clamp 25 x 3mm of size (34cm x 28cm x 13cm) including one MCB SP 6 Amp, 240 volt complete with 02 Nos aluminium bus bar or terminal two nos (2P-R/Y/B and N) of rating 63 Amp for single phase and neutral on porcelain based insulator complete all as specified and directed.
M&L for sand cushioning in trenches with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable for protection of cable complete all as specified and directed. NOTE :- Punned thickness shall be measured and paid as per SSR Part-1 2009.
Material & Labour for precast concrete cable cover type-2 flat, size 300 mm x 180mm x 40mm laid dry width wise across the cable in trenches for protection of under ground cable complete all as specified and directed.
Supply and fixing 60 watt IP 65 LED street light luminairies comprising of rectangular shape pressure die cast housing with weather proof gasket for lamps and driver compartment with system wattage 60 watt and rated lumens of minimum 5000 lumens with and including MS clamps, bracket, nuts and bolts. The LED must be with 120 degree view angle. The driver must be constant current type having THD 15% and power factor 0.95 with short circuit protection against 5KV high surge and comply to IC60598/IS 10322 (PT 0.5Sec) 1987. The luminaires must have sec optics with prefectly matched lens for better light control complete all as specified and directed.
LIGHTING PROTECTION WORKS
Supply and fixing aluminium strip of size 25x3/3.15mm on wall/on roof with seasoned wood block support of size 100 mm x 100 mm x 150mm fixed on wall by 200 mm long bolts grouted in wall /on roof and over roof with proper junction joint and bonds fastened with and including nuts, bolts and washers, screw of size as per site requirement including connecting one end to air termination rod and another end to test point terminal box complete all as specified and directed.
Supply and fixing galvanised iron strip of size 32 x 6mm burried in ground complete all as specified and directed.
ROAD PATH HARDSTANDING AND CULVERT WORKS
Material and labour for factory made precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in kerb stone set in cement mortar 1:4 and finished cement concrete surfaces even and fair without using extra cement complete all as specified and directed.
SHAH AND SONS
Phoenix Infra
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid