Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹4.8 L+₹48,112.01 (11.3%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹4.8 L+₹55,535.01 (13.0%)Rejected-Finance SURVEY NO 31 SHIV KRUPA KUNDAN NAGAR DHANKAWADI PUNE 411043 | PUNE | PUNE | MAHARASHTRA | 411043 | L3 | Rejected-Finance High Rate | |
| 4 | L4₹5.8 L+₹1.5 L (35.7%)Rejected-Finance | L4 | Rejected-Finance High Rate | |
| 5 | L5₹9.1 L+₹4.8 L (113.1%)Rejected-Finance | L5 | Rejected-Finance High Rate |
Tender Value
₹5.4 L
EMD Value
₹10,800
Closing Date
30 Mar 2024, 6:00 pmClosed
Garrison Engineer (Central) Pune, Arjun Marg, Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8465 PROVISION OF RAIN WATER HARVESTING FOR AUDITORIUM CUM CINEMA HALL AT PUNE
2024_MES_645754_1
8465 PROVISION OF RAIN WATER HARVESTING FOR AUDITO
Open Tender
Civil Works
Item Rate
120 days
Garrison Engineer (Central) Pune, Arjun Marg
As per Tender NIT
9 documents required · 9 mandatory
₹500
Garrison Engineer (Central) Pune
₹10,800
Yes
7 Sept 2024
9 Mar 2024
1 Apr 2024
9 Mar 2024
30 Mar 2024
18 Mar 2024
Amount
Site clearance including removing grass, bushes etc in any type of soil complete all as specified and as directed by Engineer-in-Charge.
Earth work & excavation in over areas in ordinary rock by mechanical means (Hydraulic excavator) (exceeding 30cm in depth, 1.50 Mtr in width as well as 10 Sqm on plan but not exceeding 1.50 Mtr in depth) including getting out and disposal of excavated earth lead upto 50 Mtr and lift upto 1.50 Mtr as directed by Engineer-in-Charge.
All as per item No 2 above but exceeding 1.50 Mt but not exc 3.00 Mtr in depth.
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for foundation etc or shafts , wells , cesspits , manholes , pier holes etc , not exc 10 Sqm on plain and not exc 1.5 Mtr in depth and getting out in hard / dense soil complete all as specified and as directed.
Supply and laying of 100mm bore dia UPVC Pipes including all fittings (SCH-40) laid & jointed in trenches complete all as specified and as directed.
M & L Cement Concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore dia pipe complete all as specified and as directed.
M & L for cement concrete1:4:8, type D-2 using 40mm graded stone aggregates as in foundation, filling , mass concrete and for filling in post holes complete all as specified and as directed.
M & L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching, coping etc complete all as specified and directed.
M & L for brick work with fly ash bricks, straight or curved on plan exc 6.00 Mtr mean radius built in CM 1:4 complete all as specified and directed.
M & L Rendering 15mm thick in CM 1:4 on fair surfaces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L for providing precast cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in cover slabs and set in CM 1:6 including use and waste of necessary formwork complete all as specified and as directed.
M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L for Boring holes of 300mm bore dia and 2 Mtr deep in soil for inserting pipe and getting out and disposal of spoil to a distance of not exc 50 Mtr complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed.
Removing excavated material (soil) to a distance not exc 50 Mtr and despositing where as directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.
S & F 150mm bore dia perforated UPVC pipes (SCH-40) including all fittings laid & jointed upto sub soil water level or as directed by Engineer-in-Charge including inverted earthen pots with holes in trenches complete all as specified.
M & L for Loose filling with broken stone aggregates of gauge12.50mm in recharge pit complete all as specified and as directed.
M & L for Loose filling with coarse sand in recharge pit complete all as specified and as directed. Note : Rate quoted by contractor shall deemed to be included mobilization of all required T&P, equipments and steel liner to protect loose earth. Nothing extra will be paid by Govt on this account.
Supply and fix single phase 1.0 H.P openwell submersible pumset KOSI-135 model of Kirloskar 2800 RPM, head 26 Mtrs, discharge capacity 1.4240 LPS, 1 phase, 240 Volts, 50Hz, IP-68, suction and delivery 25 x 25 mm with Gun metal impeller, stainless steel shaft with CI pump casing all as per manufacturer specification with suitable fixing arrangements in the sump / tank and including inlet and outlet pipe connection, NRV and including pump starter and allied items of suitable capacity and Pump to starter panel submersible copper cable 3 Core 4 Sqmm upto 15 RM complete all as specified and directed.
M & L Un-plasticised PVC pipes 25mm bore dia of pressured rating 10 Kgf/cm² ISI marked with all fittings laid in trenches, floor, wall, roof etc incliding testing & commissioning complete all as specified and as directed.
M & L Un-plasticised PVC pipes 20mm bore dia of pressured rating 10 Kgf/cm² ISI marked with all fittings laid in trenches, floor, wall, roof etc incliding testing & commissioning complete all as specified and as directed.
M & L Un-plasticised PVC pipes 15mm bore dia of pressured rating 10 Kgf/cm² ISI marked with all fittings laid in trenches, floor, wall, roof etc incliding testing & commissioning complete all as specified and as directed.
M & L 25mm bore dia Gun metal globe or gate valves heavy duty ISI marked with iron wheel head, screwed both ends for iron pipe and suitable MS nipple for connecting PVC pipes complete all as specified and as directed.
M & L 20mm bore dia Gun metal globe or gate valves heavy duty ISI marked with iron wheel head, screwed both ends for iron pipe and suitable MS nipple for connecting PVC pipes complete all as specified and as directed.
M & L 15mm bore dia Gun metal globe or gate valves heavy duty ISI marked with iron wheel head, screwed both ends for iron pipe and suitable MS nipple for connecting PVC pipes complete all as specified and as directed.
Santosh Pandurang Pise
Gurukrupa Enterprises
PAL CONSTRUCTION
Gruham Luxe Interiors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .