Construction of Additional Directors, Assistant Surgeons, Staff, Chowkidar Quartets and Fodder Sheds at Various Locations within in the Premises of Sheep Breeding Farm at Kralpatri Khanshaib Budgam.

Amount

Earth work in bulk excavation by mechinical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including dewatering, disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.including dewatering etc All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m including all dewaterings

Providing and laying Stone soling/Sand matrix filling in under foundation /foundation trenches etc in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering including all leads and liftscomplete job

Supplying and filling in plinth with sand matrix /khak bajree under floors, including watering, ramming, consolidating and compaction complete as directed by the Engineer incharge including all leads and lifts up to site.

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. completeearth filling

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast or stone soling 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete. Includings dewaterings

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Shelves (cast-in-situ)

Stairs (excluding landings) except spiral staircases.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and access platform with waterproofing ply 12 mm thick

Lintel, beams, plinth beams, girders, bressumers and cantilevers with waterproofing ply 12 mm thick

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

All work upto plinth level includings dewaterings

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

All work above plinth level upto floor V level

STEEL WORK

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

welded

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, ncluding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

0.50 mm thick with zinc coating not less than 275 gram/sqm

Providing ridges/valleys of width 60-90cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing plained eaves boarding of 2nd class Deodar wood 300x40 mm (nominal size)

Providing and Fixing 1.0 mm thick CR Sheets in eaves projection including necessary frame work of 40x40x6 angle iron and 35x 5 mm flats

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make, to all colours and shades laid on 20mm thick cement mortar 1:4(1 cement:4 coarse sand including grouting the joints with white cement and matching pigment etc. complete

Size of tile 600x600mm.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying off non slippery tiles on floors over a cement motor of 20M thick to proper grade and joining with Gray cement with pigment complete

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Extra for moulding/ nosing in treads of steps or granite stone slab

Providing and fixing collapsible steel shutters in position with vertical channels 20 x10 x 2MM and braced with flat iron diagonal, 20x5MM size with top and bottom rail of T- section iron 40x40x6mm, with 40mm dia. Steel pulleys, complete with bolt nuts ,locking, arrangements, stoppers ,handles including applying priming coat of approved steel primer’s.

Providing and fixing stainless steel (grade 304) railing made of hollow tubes channels plates etc. including welding, grinding, buffing ,polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete including fixing off the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on top of the floor or the side of waist slab with Suitable arrangements as per approval of the engineer in charge( for payment purposes only weight of stainless steel members shall be considered excluding fixing accessories such as nuts ,bolts fasteners etc.

Granite Work :- Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 16-18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab.

15MM cement plaster on rough side or single and half brick wall of mix 1:6 (1 cement:6 coarse sand)

20mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) Extrnal surgace for height upto 5th floor

Providing and applying white cement based putty of specified thickness of approved brand and manufacturer over the plaster surface to prepare the surface even and smooth .

2MM thick

Wall painting with acrylic emulsion paint having BOC volatile organic compound content less than 50 grams per liter of approved brand and manufacture including applying additional coat wherever required to achieve even shade and color .

Providing and applying texture based putty of specified thickness of approved brand and manufacturer over the plaster surface to prepare the surface even and smooth(1 to 2mm thk) for height upto 5th floor

Finishing walls with textured exterior paint of required shade :on new work( two or more codes applied @ 3.28kg/10sq.m) Over and including base coat of exterior primer applied at the rate 2.20 KG /10 sq. m for height upto 5th floor

Providing and laying water proofing treatment in sunken portions of WC’s bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying. (a)First layer or slurry of cement @0.400 kg/ m.sq mixed with water proofing cement compound @ 0.253 kg/ m sq.. this layer will be allowed to air cure for 4 hours (b)Second layer of slurry of cement 20.242 kg/ m sq. mixed with water proofing cement compound @ 0.126 kg/ m sq. This layer will be allowed to air cure for 48 hours. The rate includes preparation of surface treatment and sealing of all joints, corners, functions of pipes and masonry with polymer mixed with slurry.

Providing and fixing CP brass curtain rods having wall thickness of 1.25mm with two CP brass bracelets fixed with CP brass screws and PVC sleeves etc. wherever necessary complete.

Providing 40X5 mm flat iron hold fast 40cm long including fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30X10X15 cm 1:3:6 (cement :coarse sand :graded stone aggregate 20mm nom size)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder with Flap made out of C.P Brass

Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) of first class deodar wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class kail wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848:

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood of 35mm thick

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job.

I)P/F CP Brass Sink MIXER(jaquar/marc)

I)P/F CP Brass Wall MIXER(jaquar/marc)

I)P/F CP Brass Basin MIXER(jaquar/marc)

III)P/F CP Brass Bibcock(jaquar/marc)

III)P/F CP Brass Angle valve(jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

1Providing and fixing G.I. pipes medium complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm dia GI Pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15mm nominial bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour

15 mm nominal bore, weighing not less than 32gms

20 mm nominal bore, weighing not less than 40gms

25 mm nominal bore, weighing not less than 62gms

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.

15mm nominal bore, 105mm long, weighing not less than 138gms

20mm nominal bore, 120mm long, weighing not less than 198gms.

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

.providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i)110mm OD UPVC Prince B Type

i)75mm OD UPVC Prince B Type

2.supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

i)4"floor trap

ii) 4" p trap

iii) 4"door bend

iv)4"door T

vii)3" door bend

viii)3" door Tee

ix)6" bend

X)3"floor trap

Providing and fixing chromium plated brass butt hinges with necessary brass screws etc. complete

100x70x4 mm (ordinary type)

75x65x4 mm (heavy type)

75x40x2.5 mm (ordinary type)

AlUMUNIUM Aldrops

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 6" Handles

AlUMUNIUM 4" Handles

P/F OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet(Venus)make.50 LTR. Capacity

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimensions

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :

Size 600x450x200 mm

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge

Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone nallah

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :20.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

M.N.Enterprises