Restoration of rain damages on Nehri Mairi Jawar road km 000 to 9105 SH Providing and laying GSB WMM Metalling Tarring on damage portion between km 1235 to 1305

Loosening of the ground upto a level of 300mm (three hundred millimetre) below the sub-grade level watered graded with motor grader and compacted in layers to meet requirement of Tables 300.1 and 300.2 with three wheel 80-100 (Eighty to one hundred) KN static roller for sub grade construction as per of MORD Technical Specification section 300 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Construction of granular sub-base with material by providing well graded crushed material, spreading in uniform layers mixing by mix in place method with rotavator at OMC, and compacting with smooth Three wheel roller of 80-100kN to achieve the desired density, complete as per MORD specification clause 401 as per the direction of Engineer-in -Charge . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 in two layers and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square metre as per MORD Technical specification section 500 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and applying tack coat with bitumen emulsion RS-I, including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and laying 50mm (Fifty millimetre) thick bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto all laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.

Providing and laying 25mm (twenty five milimeter) thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding Goods Service Tax.